TMM-106-01-L-D-RE Equivalent & Substitute Parts

Part Overview

The TMM-106-01-L-D-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 12 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing. The connector is actively produced and maintains full inventory availability with 724 units in stock. Alternative part numbers exist within the same product family to accommodate specific application requirements and design variations.

Substiute Parts

TMM-106-01-L-D-RE

Samtec Inc.In Stock: 827TMM-106-01-L-D-RE Datasheet

Current PartRFQ

TMM-106-01-L-D-RA

Samtec Inc.In Stock: 990TMM-106-01-L-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-106-01-L-D-RE is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 12
• Number of Rows: 2
• Pitch - Mating: 0.079" (2.00mm)
• Row Spacing - Mating: 0.079" (2.00mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 3.2A per Contact
• Operating Temperature: -55°C ~ 125°C
• Contact Finish - Mating: Gold
• Contact Finish - Post: Tin
• Insulation Material: Liquid Crystal Polymer (LCP)
• RoHS Status: ROHS3 Compliant

The TMM-106-01-L-D-RA qualifies as a direct substitute based on complete alignment with all critical electrical and mechanical parameters within the TMM series family.

Parameter Comparison

Engineering Selection Recommendations

Both the TMM-106-01-L-D-RE and TMM-106-01-L-D-RA are active products manufactured by Samtec Inc. with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and application-specific requirements. The TMM-106-01-L-D-RA maintains higher stock levels at 933 units compared to 724 units for the TMM-106-01-L-D-RE. Both parts carry MSL 1 (Unlimited) moisture sensitivity classification and are suitable for operating environments spanning -55°C to 125°C with 3.2A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: What determines if TMM-106-01-L-D-RA can substitute for TMM-106-01-L-D-RE?

A: Direct substitution is valid when all critical parameters match: connector type, contact type, position count, row configuration, pitch spacing, mounting orientation, termination method, current rating, operating temperature range, contact finishes, insulation material, and compliance certifications. Both parts meet these criteria.

Q: Are there differences in mechanical compatibility between these parts?

A: No. Both parts share identical mating pitch (0.079"), row spacing (0.079"), contact lengths, insulation height (0.155"), and mounting type (through-hole, right-angle). They are mechanically interchangeable.

Q: Do both parts have the same electrical performance?

A: Yes. Both parts carry identical current ratings (3.2A per contact), operating temperature range (-55°C to 125°C), contact materials (phosphor bronze), and contact finishes (gold mating, tin post).

Q: What is the inventory status for each part?

A: TMM-106-01-L-D-RE has 724 units in stock. TMM-106-01-L-D-RA has 933 units in stock. Both are classified as new original inventory.

Q: Are both parts RoHS compliant?

A: Yes. Both TMM-106-01-L-D-RE and TMM-106-01-L-D-RA are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity classification.