TMM-106-01-F-D-RE Equivalent & Substitute Parts

Part Overview

The TMM-106-01-F-D-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 12 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing. The connector is designed for board-to-board or cable applications with solder termination and push-pull fastening. The part is currently active in production with 943 pieces in stock inventory.

Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring compatible 2MM terminal strip connectors with identical electrical and mechanical specifications.

Substiute Parts

TMM-106-01-F-D-RE

Samtec Inc.In Stock: 1020TMM-106-01-F-D-RE Datasheet

Current PartRFQ

TMM-106-01-F-D-RA

Samtec Inc.In Stock: 1217TMM-106-01-F-D-RA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TMM-106-01-F-D-RE are identified based on strict equivalence across the following critical parameters:

• Connector type, contact type, and series (TMM Header, Male Pin)
• Position count and row configuration (12 positions, 2 rows)
• Pitch and row spacing (0.079" / 2.00mm)
• Mounting style and termination method (Through Hole, Right Angle, Solder)
• Contact dimensions and materials (Square shape, Phosphor Bronze, Gold/Tin finish)
• Insulation material and operating temperature range (LCP, -55°C ~ 125°C)
• Current rating and electrical performance (3.2A per Contact)
• Compliance certifications (ROHS3 Compliant, MSL 1)

Parts meeting all these criteria are classified as direct substitutes. Variations in part number suffix indicate different connector orientations or configurations within the same electrical and mechanical specification set.

Parameter Comparison

Engineering Selection Recommendations

Both the TMM-106-01-F-D-RE and TMM-106-01-F-D-RA are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications. Both parts are ROHS3 compliant and carry MSL 1 rating, indicating unlimited shelf life under standard storage conditions.

Selection between these parts should be based on:

• Availability and inventory levels (TMM-106-01-F-D-RA currently has higher stock availability at 1196 pieces)
• Specific application requirements for connector orientation or mounting configuration
• Lead time and supply chain considerations
• Design documentation and PCB layout compatibility

Both parts are suitable for applications requiring 2MM pitch rectangular connectors with 12-position, 2-row configuration, through-hole right-angle mounting, and 3.2A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: What is the difference between TMM-106-01-F-D-RE and TMM-106-01-F-D-RA?

A: Both parts are electrically and mechanically equivalent 2MM terminal strip connectors from the Samtec TMM series. The suffix variation (RE vs. RA) indicates different connector orientations or configurations. All critical parameters including pitch, position count, contact materials, operating temperature, and current rating are identical.

Q: Can TMM-106-01-F-D-RA be used as a direct replacement for TMM-106-01-F-D-RE?

A: Yes, TMM-106-01-F-D-RA is a direct substitute for TMM-106-01-F-D-RE. Both parts share identical electrical specifications, mechanical dimensions, contact configurations, and compliance certifications. Substitution is valid for applications where the connector orientation is compatible with the design.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical compliance certifications: ROHS3 compliant and MSL 1 (Unlimited). Both are manufactured by Samtec Inc. and maintain the same quality and reliability standards.

Q: What is the current rating for these connectors?

A: Both connectors are rated for 3.2A per contact. Total current capacity depends on the number of contacts used in the application.

Q: What is the operating temperature range?

A: Both parts operate across the temperature range of -55°C to 125°C, suitable for industrial and commercial applications.

Q: Are these connectors RoHS compliant?

A: Yes, both TMM-106-01-F-D-RE and TMM-106-01-F-D-RA are ROHS3 compliant, meeting environmental and hazardous substance restrictions.