TMM-105-01-G-D-RA-005 Equivalent & Substitute Parts

Part Overview

The TMM-105-01-G-D-RA-005 is a 2MM terminal strip connector header manufactured by Samtec Inc., designed for through-hole, right-angle board-to-board or cable applications. This unshrouded rectangular connector features 10 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing and solder termination. The part is Active status and ROHS3 compliant, with 985 units currently in stock.

Substitute parts are identified when inventory constraints, lead time requirements, or supply chain disruptions necessitate alternative sourcing while maintaining electrical and mechanical compatibility within the TMM series.

Substiute Parts

TMM-105-01-G-D-RA-005

Samtec Inc.In Stock: 1025TMM-105-01-G-D-RA-005 Datasheet

Current PartRFQ

TMM-105-01-G-D-RA-006

Samtec Inc.In Stock: 733TMM-105-01-G-D-RA-006 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the TMM series is determined by strict equivalence across the following critical parameters:

• Pitch spacing (0.079" / 2.00mm mating pitch)
• Number of positions and row configuration (10 positions, 2 rows)
• Row spacing (0.079" / 2.00mm)
• Connector type and contact type (Header, Male Pin)
• Mounting configuration (Through Hole, Right Angle)
• Termination method (Solder)
• Contact material and finish specifications (Phosphor Bronze with Gold plating)
• Insulation material (Liquid Crystal Polymer)
• Current and temperature ratings (3.2A per Contact, -55°C ~ 125°C)

The substitute part TMM-105-01-G-D-RA-006 maintains identical specifications across all these parameters, confirming direct substitutability within the TMM-105 base product family.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-105-01-G-D-RA-005 and TMM-105-01-G-D-RA-006 are Active status products with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. The TMM-105-01-G-D-RA-005 currently maintains higher stock levels at 985 units, while the TMM-105-01-G-D-RA-006 has 710 units available. Both parts are suitable for direct substitution in applications requiring 2MM pitch rectangular connectors with 10-position, 2-row through-hole right-angle configuration and 3.2A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can TMM-105-01-G-D-RA-006 be used as a direct replacement for TMM-105-01-G-D-RA-005?

A: Yes. Both parts share identical specifications across all critical parameters including pitch spacing, position count, row configuration, mounting type, contact material, finish specifications, and electrical ratings. Direct substitution is supported within the TMM-105 base product family.

Q: What are the key parameters that determine substitutability for this connector?

A: Substitutability is determined by matching: mating pitch (0.079" / 2.00mm), number of positions (10), row configuration (2 rows), row spacing (0.079" / 2.00mm), connector type (Header), contact type (Male Pin), mounting configuration (Through Hole, Right Angle), termination method (Solder), contact material (Phosphor Bronze), contact finish (Gold), insulation material (Liquid Crystal Polymer), current rating (3.2A per Contact), and operating temperature range (-55°C ~ 125°C).

Q: Are there any compliance or certification differences between these parts?

A: No. Both TMM-105-01-G-D-RA-005 and TMM-105-01-G-D-RA-006 are ROHS3 compliant with Active product status and identical regulatory classifications (ECCN: EAR99, HTSUS: 8536.69.4040).

Q: What is the difference between these two part numbers?

A: The provided specifications indicate both parts are functionally equivalent. Differences are limited to inventory levels and moisture sensitivity level designation. The TMM-105-01-G-D-RA-005 specifies MSL 1 (Unlimited), while the TMM-105-01-G-D-RA-006 specifies MSL as Not Applicable. This does not affect electrical or mechanical compatibility.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 125°C, supporting applications across industrial and commercial temperature ranges.