TMM-104-01-G-D-RE Equivalent & Substitute Parts

Part Overview

The TMM-104-01-G-D-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 8 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing. The connector is designed for board-to-board or cable applications with solder termination and push-pull fastening. The part is currently active in production with 1065 units in stock. Substitute parts may be required due to inventory constraints, lead time considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

TMM-104-01-G-D-RE

Samtec Inc.In Stock: 1100TMM-104-01-G-D-RE Datasheet

Current PartRFQ

TMM-104-01-G-D-RA

Samtec Inc.In Stock: 2130TMM-104-01-G-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TMM-104-01-G-D-RE qualifies for substitution with TMM-104-01-G-D-RA based on the following critical parameters that determine functional equivalence:

• Manufacturer: Samtec Inc. (same manufacturer, same series TMM)
• Connector Type: Header with Male Pin contacts
• Position Configuration: 8 positions in 2 rows
• Pitch Spacing: 0.079" (2.00mm) mating pitch and row spacing
• Mounting: Through Hole, Right Angle
• Termination: Solder
• Contact Material: Phosphor Bronze with Gold finish
• Insulation Material: Liquid Crystal Polymer (LCP)
• Current Rating: 3.2A per Contact
• Operating Temperature Range: -55°C ~ 125°C
• Compliance: ROHS3 Compliant, MSL 1

Both parts share identical electrical and mechanical specifications within the TMM series, confirming direct substitution capability.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-104-01-G-D-RE and TMM-104-01-G-D-RA are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The TMM-104-01-G-D-RA currently has higher inventory availability at 2116 units compared to 1065 units for the TMM-104-01-G-D-RE. Both parts maintain ROHS3 compliance and carry identical regulatory classifications (ECCN: EAR99, HTSUS: 8536.69.4040). The MSL 1 rating indicates unlimited shelf life under standard storage conditions for both variants.

Frequently Asked Questions (FAQ)

Q: Are TMM-104-01-G-D-RE and TMM-104-01-G-D-RA fully interchangeable?

A: Yes. Both connectors share identical electrical and mechanical parameters including pitch spacing (0.079" / 2.00mm), contact configuration (8 positions, 2 rows), current rating (3.2A per contact), operating temperature range (-55°C ~ 125°C), and material specifications. They are direct substitutes within the TMM series.

Q: What is the difference between these two part numbers?

A: The parts are functionally equivalent. The difference in part number designation reflects internal Samtec manufacturing or configuration variants, but all critical parameters remain identical for circuit board integration and mating applications.

Q: Can I use TMM-104-01-G-D-RA as a drop-in replacement for TMM-104-01-G-D-RE?

A: Yes. The identical pitch spacing, contact length, insulation height, and mounting configuration ensure mechanical and electrical compatibility in any application designed for the TMM-104-01-G-D-RE.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical compliance certifications: ROHS3 Compliant, MSL 1 (Unlimited), ECCN EAR99, and HTSUS 8536.69.4040.

Q: What is the current rating for each contact?

A: Both connectors are rated for 3.2A per contact, supporting the same electrical load capacity in applications.

Q: What is the operating temperature range?

A: Both parts operate across the identical temperature range of -55°C to 125°C, suitable for industrial and commercial applications.