TMM-102-01-F-S-RE Equivalent & Substitute Parts

Part Overview

The TMM-102-01-F-S-RE is a 2-position rectangular connector header manufactured by Samtec Inc., designed for through-hole, right-angle board-to-board or cable applications. This connector features a 2.00mm pitch, gold-plated mating contacts, and a current rating of 3.2A per contact. The part is active in production status with ROHS3 compliance and MSL Level 1 rating, making it suitable for standard industrial and commercial applications requiring reliable solder termination.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series, allowing for design flexibility and supply chain optimization without compromising performance or reliability.

Substiute Parts

TMM-102-01-F-S-RE

Samtec Inc.In Stock: 902TMM-102-01-F-S-RE Datasheet

Current PartRFQ

TMM-102-01-F-S-RA

Samtec Inc.In Stock: 1303TMM-102-01-F-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-102-01-F-S-RE is determined by strict equivalence across the following critical parameters:

• Series designation (TMM)
• Number of positions (2)
• Pitch specification (0.079" / 2.00mm)
• Connector type (Header)
• Contact type (Male Pin)
• Mounting configuration (Through Hole, Right Angle)
• Termination method (Solder)
• Current rating (3.2A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Contact finish on mating surface (Gold)
• Insulation material (Liquid Crystal Polymer)
• Compliance certifications (ROHS3, MSL Level 1)

The identified substitute part TMM-102-01-F-S-RA maintains all these parameters within the same product series, ensuring functional and mechanical compatibility for direct substitution in applications where the TMM-102-01-F-S-RE is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the TMM-102-01-F-S-RE and TMM-102-01-F-S-RA are active production parts manufactured by Samtec Inc. within the TMM series. Both parts maintain identical electrical and mechanical specifications, including current rating, operating temperature range, contact materials, and compliance certifications.

Selection between these parts should be based on availability and supply chain requirements. Both parts are ROHS3 compliant and carry MSL Level 1 rating, indicating equivalent reliability and environmental performance. The parts share the same base product number (TMM-102) and are classified under identical ECCN and HTSUS codes, confirming their functional equivalence for procurement and regulatory purposes.

Frequently Asked Questions (FAQ)

Q: Can TMM-102-01-F-S-RA be used as a direct replacement for TMM-102-01-F-S-RE?

A: Yes. Both parts maintain identical specifications across all critical parameters including pitch, position count, current rating, operating temperature, contact materials, and compliance certifications. Direct substitution is supported without design modification.

Q: Are there any differences in contact finish or plating between these parts?

A: No. Both parts feature gold-plated mating contacts with identical finish thickness (3.00µin / 0.076µm) and tin-plated posts. Contact material composition is identical (Phosphor Bronze).

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both parts carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and carry identical environmental certifications.

Q: What is the current capacity per contact for these connectors?

A: Both parts are rated for 3.2A per contact, supporting identical power delivery specifications.

Q: Are there any temperature operating range differences?

A: No. Both parts operate across the identical temperature range of -55°C to 125°C.