TML-115-01-G-D-RA Equivalent & Substitute Parts

Part Overview

The TML-115-01-G-D-RA is a shrouded rectangular connector header manufactured by Samtec Inc. This through-hole, right-angle connector features 30 positions arranged in 2 rows with 0.050" (1.27mm) pitch spacing. The component is classified as Active product status and is suitable for board-to-board applications requiring push-pull fastening. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

TML-115-01-G-D-RA

Samtec Inc.In Stock: 665TML-115-01-G-D-RA Datasheet

Current PartRFQ

104069-5

TE Connectivity AMP ConnectorsIn Stock: 781104069-5 Datasheet

SimilarRFQ

5-104069-5

TE Connectivity AMP ConnectorsIn Stock: 61635-104069-5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TML-115-01-G-D-RA is determined by strict alignment of core electrical and mechanical parameters. The following parameters establish substitution criteria:

Primary Matching Parameters:

• Pitch - Mating: 0.050" (1.27mm)
• Number of Positions: 30
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Number of Positions Loaded: All
• Style: Board to Board or Board to Board/Cable compatible

The substitute parts identified—TE Connectivity AMP Connectors 104069-5 and 5-104069-5—satisfy all primary matching parameters. Both parts are classified as Active product status and maintain functional equivalence for board-to-board connector applications.

Parameter Comparison

Engineering Selection Recommendations

TML-115-01-G-D-RA (Samtec Inc.): This part maintains Active product status with ROHS3 compliance. The connector features a 4-wall shrouded design with square contact geometry and phosphor bronze contact material. Operating temperature range extends to -55°C ~ 125°C. Current inventory: 622 pieces.

104069-5 (TE Connectivity AMP Connectors): This substitute maintains Active product status. The connector features a 2-wall shrouded design with circular contact geometry and copper alloy contact material. Operating temperature range is -65°C ~ 105°C. RoHS status is not applicable. Current inventory: 706 pieces.

5-104069-5 (TE Connectivity AMP Connectors): This substitute maintains Active product status with RoHS compliance. The connector features a 2-wall shrouded design with circular contact geometry and copper alloy contact material. Operating temperature range is -65°C ~ 105°C. Current inventory: 6101 pieces.

All three parts share identical pitch, position count, row configuration, and mounting orientation. Selection between these parts depends on specific application requirements regarding operating temperature range, shrouding design, contact geometry, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: What are the core parameters that determine substitution eligibility for the TML-115-01-G-D-RA?

A: Substitution is based on matching pitch (0.050" / 1.27mm), position count (30), row configuration (2 rows), row spacing (0.100" / 2.54mm), connector type (Header), contact type (Male Pin), mounting type (Through Hole, Right Angle), termination method (Solder), and style (Board to Board or compatible). All identified substitutes meet these criteria.

Q: Are there mechanical differences between the TML-115-01-G-D-RA and the TE Connectivity substitutes?

A: Yes. The TML-115-01-G-D-RA features 4-wall shrouding, square contact geometry, and an insulation height of 0.370" (9.40mm). The TE Connectivity parts (104069-5 and 5-104069-5) feature 2-wall shrouding, circular contact geometry, and an insulation height of 0.290" (7.37mm). Contact length specifications also differ: mating contact length is 0.120" (3.05mm) for the Samtec part versus 0.125" (3.18mm) for TE Connectivity parts.

Q: What is the difference between 104069-5 and 5-104069-5?

A: Both parts are functionally equivalent with identical electrical and mechanical specifications. The primary difference is RoHS compliance status: 104069-5 is listed as "Not applicable," while 5-104069-5 is "RoHS Compliant." Additionally, contact finish on the post differs: 104069-5 uses Tin-Lead while 5-104069-5 uses Tin. Inventory availability also differs: 104069-5 has 706 pieces versus 6101 pieces for 5-104069-5.

Q: What is the operating temperature difference between these parts?

A: The TML-115-01-G-D-RA operates from -55°C to 125°C. Both TE Connectivity substitutes (104069-5 and 5-104069-5) operate from -65°C to 105°C. The Samtec part supports higher maximum temperature, while the TE Connectivity parts support lower minimum temperature.

Q: Are these parts compatible with the same mating connectors?

A: All three parts share identical pitch (0.050" / 1.27mm), position count (30), and row spacing (0.100" / 2.54mm). However, mechanical differences in shrouding design, contact geometry, and insulation height may affect mating connector compatibility. Verification with specific mating connector specifications is required.

Q: What packaging is used for these parts?

A: All three parts are supplied in Tube packaging.