Equivalent & Substitute Parts Reference for TML 10115

Part Overview

The TML 10115 from Traco Power is an enclosed, through-hole AC/DC converter with a 15V, 666mA single output, designed for ITE (Commercial) applications, featuring a wide input voltage range and ROHS3 compliance. This model is classified as obsolete, and therefore, identifying suitable alternative models is essential for ongoing production and maintenance requirements.

Substiute Parts

TML 10115

Traco PowerIn Stock: 1099TML 10115 Datasheet

Current PartRFQ

TMPS 10-115

Traco PowerIn Stock: 923TMPS 10-115 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part TMPS 10-115 is identified where the following key parameters are strictly matched: converter type (enclosed), number of outputs (1), output voltage (15V), maximum output current (approximately 660-666mA), power rating (10 W), input voltage ranges (universal AC/DC), application suitability (ITE, commercial), mounting type (through hole), and RoHS3 compliance. Only parts meeting these specific field values are considered substitutes.

Parameter Comparison

Engineering Selection Recommendations

Selection between TML 10115 and TMPS 10-115 should be based on product lifecycle status, RoHS3 compliance, and certification requirements. The TML 10115 is obsolete, while the TMPS 10-115 is active and meets all relevant RoHS3 and approval agency certifications (CB, CE, cURus). The substitute provides functional equivalence within the specified categories.

Frequently Asked Questions (FAQ)

Q1: What are the essential criteria for substituting TML 10115 in its application?
A1: Substitute parts must match on output voltage (15V), output current rating, power rating, input voltage compatibility, number of outputs, enclosure type, mounting style, and RoHS3 compliance.

Q2: Are there differences in output current or voltage tolerance between TML 10115 and TMPS 10-115?
A2: Both provide a 15V output, with the TML 10115 rated at 666mA and the TMPS 10-115 at 660mA. This aligns with substitution standards provided for power supplies in this category.

Q3: What should be considered regarding package or footprint differences?
A3: TML 10115 uses a 6-DIP module (2.52" x 1.77" x 0.81"), while TMPS 10-115 uses a 4-DIP module (1.50" x 1.00" x 0.62"). Mechanical compatibility requires verification against the specific application’s mechanical constraints.

Q4: Do both models comply with identical regulatory or environmental standards?
A4: Both parts are ROHS3 compliant and carry CE and cURus approvals. TMPS 10-115 additionally features CB certification.

Q5: Is the substitute model suitable for the same commercial and industrial applications as the original?
A5: TMPS 10-115 is suitable for ITE (Commercial) applications, aligning with the usage of TML 10115 within the defined parameters.