TLW-117-06-S-D Equivalent & Substitute Parts

Part Overview

The TLW-117-06-S-D is a rectangular connector header manufactured by Samtec Inc., part of the Flex Stack TLW series. This through-hole connector features 34 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector is actively produced and maintains full inventory availability. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in board-to-board or cable applications without design modification.

Substiute Parts

TLW-117-06-S-D

Samtec Inc.In Stock: 997TLW-117-06-S-D Datasheet

Current PartRFQ

TLW-117-06-G-D

Samtec Inc.In Stock: 4135TLW-117-06-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLW-117-06-S-D is determined by strict equivalence across the following critical parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Position count and row configuration (34 positions, 2 rows)
• Pitch spacing (0.100" mating pitch, 0.100" row spacing)
• Mounting method and termination (Through Hole, Solder)
• Current and temperature ratings (5.2A per contact, -55°C ~ 125°C)
• Contact material and insulation material (Phosphor Bronze, LCP)
• Compliance certifications (ROHS3 Compliant, MSL 1)

The substitute part TLW-117-06-G-D meets all these criteria and is classified as an equivalent alternative within the Flex Stack TLW series.

Parameter Comparison

Engineering Selection Recommendations

Both TLW-117-06-S-D and TLW-117-06-G-D are active products within the Flex Stack TLW series and maintain ROHS3 compliance. Both connectors satisfy identical electrical and mechanical specifications for 34-position, 2-row through-hole header applications with 0.100" pitch spacing. Selection between these parts is based on inventory availability and supply chain considerations, as all functional parameters remain equivalent. Both parts carry MSL 1 rating and operate across the -55°C to 125°C temperature range with 5.2A per-contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can TLW-117-06-G-D replace TLW-117-06-S-D in existing designs?

A: Yes. Both connectors share identical electrical and mechanical parameters, including position count, pitch spacing, current rating, temperature range, and contact materials. Direct substitution is supported without design modification.

Q: What are the key differences between these part numbers?

A: The parts are functionally equivalent across all provided specifications. Both are manufactured by Samtec Inc. within the Flex Stack TLW series and maintain identical performance characteristics for board-to-board and cable connector applications.

Q: Are both parts actively manufactured?

A: Yes. Both TLW-117-06-S-D and TLW-117-06-G-D maintain active product status with current inventory availability.

Q: Do both connectors meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry MSL 1 rating, and share identical ECCN and HTSUS classifications.

Q: What is the pitch spacing for these connectors?

A: Both connectors feature 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing in a 2-row, 34-position configuration.

Q: What current capacity should be considered for circuit design?

A: Each contact is rated for 5.2A. Total circuit current capacity depends on the number of contacts utilized and parallel current distribution across the connector.