TLW-115-05-H-D Equivalent & Substitute Parts

Part Overview

The TLW-115-05-H-D is a rectangular connector header manufactured by Samtec Inc., part of the Flex Stack TLW series. This through-hole mounted connector features 30 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The connector is actively produced and stocked, with 1008 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector interface, allowing for direct replacement in board-to-board or cable applications without redesign.

Substiute Parts

TLW-115-05-H-D

Samtec Inc.In Stock: 1059TLW-115-05-H-D Datasheet

Current PartRFQ

TLW-115-05-G-D

Samtec Inc.In Stock: 1101TLW-115-05-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLW-115-05-H-D is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 30
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Current Rating: 5.2A per Contact
• Operating Temperature: -55°C ~ 125°C
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Series: Flex Stack, TLW
• RoHS Status: ROHS3 Compliant

The substitute part TLW-115-05-G-D maintains all critical electrical and mechanical parameters, differing only in contact finish specifications and post-termination characteristics, which do not affect functional compatibility in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both TLW-115-05-H-D and TLW-115-05-G-D are active products manufactured by Samtec Inc. and maintain ROHS3 compliance. Selection between these parts is based on inventory availability and specific contact finish requirements. The TLW-115-05-H-D currently maintains 1008 units in stock, while TLW-115-05-G-D has 1039 units available. Both parts are suitable for applications requiring 30-position, 2-row through-hole headers with 0.100" pitch spacing and 5.2A per contact current capacity across the -55°C to 125°C operating range.

Frequently Asked Questions (FAQ)

Q: Can TLW-115-05-G-D be used as a direct replacement for TLW-115-05-H-D?

A: Yes. Both parts maintain identical electrical and mechanical specifications across all critical parameters including pitch, position count, row configuration, current rating, and operating temperature range. The parts are functionally equivalent for board-to-board and cable connector applications.

Q: What are the differences between TLW-115-05-H-D and TLW-115-05-G-D?

A: The primary differences are in contact finish specifications. TLW-115-05-G-D specifies contact finish thickness on the mating surface (10.0µin / 0.25µm) and includes gold finish on the post with flash thickness specification. TLW-115-05-H-D does not specify these finish thickness values. Both maintain gold mating surface finish and phosphor bronze contact material.

Q: Are both parts RoHS compliant?

A: Yes. Both TLW-115-05-H-D and TLW-115-05-G-D are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the pitch spacing for these connectors?

A: Both parts feature 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing, providing standard spacing for 30-position, 2-row header configurations.

Q: What current capacity do these connectors support?

A: Both parts are rated for 5.2A per contact, supporting applications requiring moderate current distribution across multiple signal or power lines.