TLW-114-06-L-D Equivalent & Substitute Parts

Part Overview

The TLW-114-06-L-D is an active Samtec Flex Stack rectangular connector header designed for through-hole mounting applications. This 28-position, 2-row connector operates across -55°C to 125°C and supports 5.2A per contact with gold-plated mating surfaces. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

TLW-114-06-L-D

Samtec Inc.In Stock: 1192TLW-114-06-L-D Datasheet

Current PartRFQ

TLW-114-06-G-D

Samtec Inc.In Stock: 826TLW-114-06-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLW-114-06-L-D is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 28
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Current Rating: 5.2A per Contact
• Operating Temperature: -55°C ~ 125°C
• Contact Finish - Mating: Gold
• Insulation Material: Liquid Crystal Polymer (LCP)
• Series: Flex Stack, TLW
• RoHS Status: ROHS3 Compliant

The TLW-114-06-G-D qualifies as a direct substitute based on identical values across all critical electrical and mechanical parameters. Both parts belong to the same Samtec Flex Stack series, share identical connector geometry, contact specifications, and environmental ratings.

Parameter Comparison

Engineering Selection Recommendations

Both the TLW-114-06-L-D and TLW-114-06-G-D are active products with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The TLW-114-06-G-D includes documented contact finish thickness specifications (10.0µin / 0.25µm mating surface, Flash post finish), providing additional process control documentation. Both parts are suitable for direct substitution in applications requiring 28-position, 2.54mm pitch through-hole headers with 5.2A per contact capacity across the specified temperature range.

Frequently Asked Questions (FAQ)

Q: Can TLW-114-06-G-D replace TLW-114-06-L-D in existing designs?

A: Yes. Both parts share identical connector geometry, contact specifications, pitch, row spacing, current rating, and operating temperature range. No design modifications are required for direct substitution.

Q: What are the key differences between these two part numbers?

A: The parts are electrically and mechanically equivalent. The TLW-114-06-G-D provides explicit contact finish thickness documentation, while the TLW-114-06-L-D does not specify these values in the available data.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts operate across -55°C to 125°C and are suitable for applications within this temperature range.

Q: Do both parts meet RoHS requirements?

A: Yes. Both TLW-114-06-L-D and TLW-114-06-G-D are ROHS3 compliant.

Q: What is the current capacity per contact?

A: Both parts support 5.2A per contact, suitable for standard signal and moderate power distribution applications.

Q: Are these parts available in different packaging options?

A: Both parts are supplied in bulk packaging as standard.