TLW-113-06-S-S Equivalent & Substitute Parts

Part Overview

The TLW-113-06-S-S is an active rectangular connector header manufactured by Samtec Inc. as part of the Flex Stack TLW series. This through-hole connector features 13 positions at 0.100" (2.54mm) pitch with male pin contacts and solder termination. The connector is designed for board-to-board or cable applications with unshrouded configuration and push-pull fastening. Finding equivalent or substitute parts may be necessary due to inventory constraints, supply chain considerations, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

TLW-113-06-S-S

Samtec Inc.In Stock: 801TLW-113-06-S-S Datasheet

Current PartRFQ

TLW-113-06-G-S

Samtec Inc.In Stock: 734TLW-113-06-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLW-113-06-S-S is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (13)
• Pitch - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Fastening type (Push-Pull)
• Contact material (Phosphor Bronze)
• Insulation material (Liquid Crystal Polymer)
• Operating temperature range (-55°C ~ 125°C)
• Current rating (5.2A per Contact)
• RoHS compliance status (ROHS3 Compliant)
• MSL rating (1 - Unlimited)

The substitute part TLW-113-06-G-S meets all these criteria and belongs to the same Flex Stack TLW series from Samtec Inc., ensuring mechanical and electrical compatibility within the specified application envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the TLW-113-06-S-S and TLW-113-06-G-S are active products from Samtec Inc. with identical electrical and mechanical specifications. Both connectors maintain ROHS3 compliance and carry the same MSL rating of 1 (Unlimited), indicating equivalent reliability and handling requirements. The parts share identical contact materials, insulation properties, and performance ratings across all specified parameters. Selection between these parts may be based on inventory availability, lead time, or supply chain considerations, as they are functionally equivalent for all documented applications.

Frequently Asked Questions (FAQ)

Q: Are TLW-113-06-S-S and TLW-113-06-G-S mechanically interchangeable?

A: Yes. Both connectors feature identical mechanical dimensions, including contact length, insulation height, pitch, and overall form factor. They mount identically in through-hole applications and accept the same mating components.

Q: Do these connectors have the same electrical performance?

A: Yes. Both parts carry identical current ratings of 5.2A per contact, operate across the same temperature range of -55°C to 125°C, and use phosphor bronze contacts with gold mating finish.

Q: What is the difference between these two part numbers?

A: The primary difference lies in contact finish specifications. TLW-113-06-G-S includes documented contact finish thickness specifications (10.0µin / 0.25µm on mating surface and flash on post), while TLW-113-06-S-S does not specify these values in the provided data. Both maintain gold mating finish and are ROHS3 compliant.

Q: Are both parts suitable for high-reliability applications?

A: Both connectors carry MSL rating 1 (Unlimited), indicating they are not moisture-sensitive and suitable for standard industrial and commercial applications. Both maintain active product status with ROHS3 compliance.

Q: Can I use these connectors in the same PCB design without layout modifications?

A: Yes. The connectors are dimensionally identical across all critical parameters including pitch (0.100" / 2.54mm), contact positions (13), and mounting type (through-hole solder). No PCB layout changes are required for substitution.