TLW-110-06-L-D Equivalent & Substitute Parts

Part Overview

The TLW-110-06-L-D is an active Samtec Flex Stack rectangular connector header designed for through-hole board-to-board or cable applications. This 20-position, 2-row connector operates across -55°C to 125°C and supports 5.2A per contact. Finding equivalent or substitute parts becomes necessary when managing inventory constraints, lead time optimization, or design flexibility across production batches while maintaining electrical and mechanical compatibility.

Substiute Parts

TLW-110-06-L-D

Samtec Inc.In Stock: 933TLW-110-06-L-D Datasheet

Current PartRFQ

TLW-110-06-G-D

Samtec Inc.In Stock: 1741TLW-110-06-G-D Datasheet

SimilarRFQ

TLW-110-06-G-D-LL

Samtec Inc.In Stock: 1240TLW-110-06-G-D-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TLW-110-06-L-D is determined by strict alignment of the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 20
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Length - Mating: 0.105" (2.67mm)
• Contact Length - Post: 0.135" (3.43mm)
• Overall Contact Length: 0.300" (7.62mm)
• Insulation Height: 0.060" (1.52mm)
• Contact Shape: Square
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 5.2A per Contact
• Insulation Color: Black
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed below maintain these parameters identically to the main part, ensuring direct functional and mechanical interchangeability within the Flex Stack TLW series.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TLW-110-06-L-D, TLW-110-06-G-D, and TLW-110-06-G-D-LL—are active products from Samtec Inc. within the Flex Stack TLW series. Each maintains identical electrical and mechanical specifications, including contact configuration, pitch, temperature rating, current capacity, and compliance certifications (ROHS3, MSL 1).

Selection between these parts should be based on inventory availability and lead time requirements. The TLW-110-06-G-D currently maintains the highest inventory level at 1666 pieces, followed by TLW-110-06-G-D-LL at 1167 pieces, and TLW-110-06-L-D at 909 pieces. All parts are suitable for direct substitution in applications requiring 20-position, 2-row through-hole headers with 2.54mm pitch and 5.2A per contact capacity.

Frequently Asked Questions (FAQ)

Q: Can TLW-110-06-G-D and TLW-110-06-G-D-LL be used interchangeably with TLW-110-06-L-D?

A: Yes. All three parts share identical electrical and mechanical parameters, including connector type, position count, pitch, row spacing, contact dimensions, material composition, temperature rating, and current capacity. They are direct substitutes within the Flex Stack TLW series.

Q: What determines compatibility between these connector headers?

A: Compatibility is determined by matching critical parameters: connector type (Header), contact type (Male Pin), number of positions (20), number of rows (2), mating pitch (0.100"/2.54mm), row spacing (0.100"/2.54mm), contact dimensions, insulation material (LCP), operating temperature range (-55°C to 125°C), and current rating (5.2A per contact).

Q: Are there differences in contact finish between these parts?

A: The TLW-110-06-L-D does not specify contact finish thickness values. The TLW-110-06-G-D and TLW-110-06-G-D-LL both specify gold contact finish with 10.0µin (0.25µm) thickness on mating surfaces and flash thickness on post surfaces. All three parts use gold mating contact finish and phosphor bronze base material.

Q: Do all parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, carry Moisture Sensitivity Level 1 (Unlimited), and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: Which part should be selected for new designs?

A: Any of the three parts is suitable for new designs. Selection should prioritize inventory availability and procurement lead times, as all parts are active products with identical functional specifications.