TLW-107-06-L-D Equivalent & Substitute Parts

Part Overview

The TLW-107-06-L-D is a rectangular connector header manufactured by Samtec Inc., part of the Flex Stack TLW series. This through-hole connector features 14 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable applications. The connector is currently in active production status with 735 units in stock. Alternative part numbers within this series are available to support procurement flexibility and supply chain continuity.

Substiute Parts

TLW-107-06-L-D

Samtec Inc.In Stock: 788TLW-107-06-L-D Datasheet

Current PartRFQ

TLW-107-06-G-D

Samtec Inc.In Stock: 1733TLW-107-06-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the TLW-107 series is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Number of positions (14)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Contact type (Male Pin)
• Current rating (5.2A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• RoHS3 compliance
• MSL rating (1 - Unlimited)

The TLW-107-06-G-D qualifies as a direct substitute based on identical values across all these parameters. Variations in contact finish specifications (finish thickness and post finish details) do not affect functional interchangeability for standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both TLW-107-06-L-D and TLW-107-06-G-D are active production components with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: TLW-107-06-G-D has higher stock levels (1644 units vs. 735 units)
• Contact finish specifications: TLW-107-06-G-D includes documented contact finish thickness (10.0µin / 0.25µm) and post finish (Flash), while TLW-107-06-L-D does not specify these values
• Supply chain requirements: Either part satisfies identical functional requirements for through-hole board-to-board or cable connector applications

Frequently Asked Questions (FAQ)

Q: Are TLW-107-06-L-D and TLW-107-06-G-D mechanically interchangeable?

A: Yes. Both connectors share identical pitch spacing (0.100" / 2.54mm), row spacing (0.100" / 2.54mm), contact dimensions, and mounting specifications. They are mechanically interchangeable in through-hole applications.

Q: What is the difference between these two part numbers?

A: The primary difference is in documented contact finish specifications. TLW-107-06-G-D specifies contact finish thickness (10.0µin / 0.25µm) and post finish (Flash), while TLW-107-06-L-D does not include these specifications in the provided data.

Q: Can I use either part in my design without modification?

A: Yes. Both parts meet identical electrical and mechanical requirements: 14 positions, 2 rows, 0.100" pitch, 5.2A per contact rating, -55°C to 125°C operating temperature, and ROHS3 compliance.

Q: Which part should I select for new designs?

A: Selection should be based on availability and supply chain considerations. Both parts are active production items with equivalent functional performance.

Q: Are there any packaging or handling differences?

A: Both parts are supplied in bulk packaging with MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.