TLVD4200 Equivalent & Substitute Parts

Part Overview

The TLVD4200 is a red LED indication component manufactured by Vishay Semiconductor Opto Division, designed for through-hole mounting applications. This 3mm T-1 radial LED operates at 1.8V forward voltage with a 640nm dominant wavelength and 80mcd brightness rating. The component is Active status and ROHS3 compliant, making it suitable for modern electronic assemblies. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, ensuring functional compatibility in circuit designs.

Key Parameters

Parameter	TLVD4200 Value
Color	Red
Lens Transparency	Clear
Lens Size	3mm, T-1
Millicandela Rating	80mcd
Voltage - Forward (Vf) (Typ)	1.8V
Current - Test	15mA
Wavelength - Dominant	640nm
Mounting Type	Through Hole
Package / Case	Radial
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the TLVD4200 are evaluated based on the following critical parameters: color (red), lens transparency (clear), mounting type (through hole), package type (radial), and lens size category (3mm T-1 or equivalent diameter). All substitute candidates maintain ROHS3 compliance and MSL Level 1 rating. Substitution validity is determined by compatibility within these electrical and mechanical constraints. Parts listed represent available alternatives with documented specifications matching the primary application requirements.

Parameter Comparison

Part Number	Manufacturer	Color	Lens Transparency	Lens Size	Millicandela Rating	Vf (Typ)	Current - Test	Wavelength - Dominant	Mounting Type	Package / Case	Height (Max)	RoHS Status
TLVD4200	Vishay Semiconductor Opto Division	Red	Clear	3mm, T-1	80mcd	1.8V	15mA	640nm	Through Hole	Radial	4.90mm	ROHS3 Compliant
5219432F	Dialight	Red	Clear	2.90mm Dia	29mcd	-	20mA	-	Through Hole	Radial	5.89mm	ROHS3 Compliant
HLMP-1321	Broadcom Limited	Red	Clear	3mm, T-1	30mcd	1.9V	10mA	626nm	Through Hole	Radial	6.35mm	ROHS3 Compliant
HLMP-1321-G0002	Broadcom Limited	Red	Clear	3mm, T-1	30mcd	1.9V	10mA	626nm	Through Hole	Radial	6.35mm	ROHS3 Compliant
HLMP-Y301-F0000	Broadcom Limited	Red	Clear	3mm, T-1	19mcd	2.1V	20mA	626nm	Through Hole	Radial	5.20mm	ROHS3 Compliant
LTL-1CHEE	Lite-On Inc.	Red	Clear	3.10mm Dia	19mcd	2V	20mA	625nm	Through Hole	Radial	5.20mm	ROHS3 Compliant
LTL-4222N	Lite-On Inc.	Red	Clear	3mm, T-1	29mcd	2V	10mA	623nm	Through Hole	Radial	5.85mm	ROHS3 Compliant
SLR-332VC3F	Rohm Semiconductor	Red	Clear	3.20mm Dia	10mcd	2V	10mA	630nm	Through Hole	Radial	4.60mm	ROHS3 Compliant
SSL-LX3044IT	Lumex Opto/Components Inc.	Red	Clear	3mm, T-1	30mcd	2.1V	20mA	-	Through Hole	Radial	4.60mm	ROHS3 Compliant
WP132XIT	Kingbright	Red	Clear	3mm, T-1	20mcd	2V	20mA	617nm	Through Hole	Radial	5.20mm	ROHS3 Compliant
WP710A10IT	Kingbright	Red	Clear	3mm, T-1	30mcd	2V	20mA	617nm	Through Hole	Radial	5.90mm	ROHS3 Compliant

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, meeting regulatory requirements equivalent to the TLVD4200. Selection among substitutes depends on circuit-specific requirements for forward voltage, test current, and brightness rating. Parts with 3mm T-1 lens size designation (HLMP-1321, HLMP-1321-G0002, HLMP-Y301-F0000, LTL-4222N, SSL-LX3044IT, WP132XIT, WP710A10IT) provide direct mechanical compatibility with standard 3mm LED mounting footprints. Parts with alternative lens diameters (5219432F at 2.90mm, LTL-1CHEE at 3.10mm, SLR-332VC3F at 3.20mm) may require mechanical accommodation verification. Forward voltage variations range from 1.9V to 2.1V across substitutes, requiring circuit design confirmation for current-limiting resistor calculations. Brightness ratings vary significantly from 10mcd to 80mcd; application visibility requirements determine appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can HLMP-1321 directly replace TLVD4200 in existing PCB designs? A: HLMP-1321 shares the 3mm T-1 lens size and through-hole radial package with TLVD4200, providing mechanical compatibility. However, forward voltage differs (1.9V vs 1.8V) and brightness is lower (30mcd vs 80mcd). Circuit design verification is required to confirm current-limiting resistor values and visibility adequacy.

Q: What is the primary difference between HLMP-1321 and HLMP-1321-G0002? A: Both parts are electrically and mechanically identical. The difference is packaging: HLMP-1321 is supplied in Bulk, while HLMP-1321-G0002 is supplied in Cut Tape (CT). Selection depends on assembly process requirements.

Q: Are parts with different lens diameters (2.90mm, 3.10mm, 3.20mm) suitable substitutes? A: These parts maintain red color, clear lens transparency, and through-hole radial mounting. However, mechanical fit in existing PCB holes and lens assemblies must be verified. Lens diameter variations may affect optical performance and physical clearance.

Q: How do brightness ratings affect substitution decisions? A: The TLVD4200 operates at 80mcd, the highest among listed substitutes. Lower-brightness alternatives (10mcd to 30mcd) are suitable only for applications where reduced visibility is acceptable. Higher brightness requirements cannot be met by listed substitutes.

Q: What forward voltage considerations apply when selecting substitutes? A: TLVD4200 operates at 1.8V typical. Substitutes range from 1.9V to 2.1V. Current-limiting resistor values must be recalculated based on the selected substitute's forward voltage to maintain proper circuit operation and LED lifespan.

Q: Do all substitutes meet the same compliance standards as TLVD4200? A: All listed substitutes are ROHS3 compliant with MSL Level 1 rating, matching TLVD4200 compliance. REACH status varies: Vishay, Broadcom, Rohm, Lumex, and Kingbright parts are REACH Unaffected; Lite-On parts are REACH Affected.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message