TLV76728DRVT Equivalent & Substitute Parts

Part Overview

The TLV76728DRVT is a linear voltage regulator IC from Texas Instruments, classified as a Power Management (PMIC) component. It delivers a fixed positive output of 2.8V at 1A with a maximum dropout voltage of 0.9V. The device is actively produced and widely used in applications requiring low-noise, low-dropout regulation with integrated protection features. Finding equivalent or substitute parts is necessary when addressing supply chain constraints, inventory availability, or specific packaging requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

TLV76728DRVT

Texas InstrumentsIn Stock: 1200TLV76728DRVT Datasheet

Current PartRFQ

TLV76728DRVR

Texas InstrumentsIn Stock: 3916TLV76728DRVR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLV76728DRVT are identified based on strict electrical and mechanical parameter matching. The critical parameters that define substitutability are:

• Output voltage configuration (Positive, Fixed 2.8V)
• Output current capability (1A)
• Maximum input voltage (16V)
• Dropout voltage performance (0.9V @ 1A)
• Package type (6-WSON with exposed pad)
• Protection features (Over Current, Over Temperature, UVLO)
• Operating temperature range (-40°C to 125°C)
• Control features (Enable function)

The TLV76728DRVR meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical specifications and are housed in the same 6-WSON (2x2) package, differing only in packaging format (Tape & Reel designation).

Parameter Comparison

Engineering Selection Recommendations

Both the TLV76728DRVT and TLV76728DRVR are active products from Texas Instruments with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Packaging format availability: TLV76728DRVT is supplied in Tape & Reel format; TLV76728DRVR is also supplied in Tape & Reel format
• Inventory status: TLV76728DRVR currently has higher stock availability (3843 Pcs vs. 1115 Pcs)
• Supply chain requirements: Both parts carry ROHS3 compliance and REACH Unaffected status, meeting regulatory requirements for industrial and commercial applications
• Moisture sensitivity: Both parts are rated MSL 2 (1 Year), requiring standard moisture control during storage and handling

Frequently Asked Questions (FAQ)

Q: Can TLV76728DRVR be used as a direct replacement for TLV76728DRVT?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage (2.8V), output current (1A), dropout voltage (0.9V @ 1A), and package type (6-WSON 2x2). They are functionally interchangeable in circuit design.

Q: What are the key differences between these two part numbers?

A: The parts are electrically and mechanically identical. Both are supplied in Tape & Reel packaging format. The primary difference is inventory availability and supplier stock levels.

Q: Are there any package compatibility concerns?

A: No. Both parts use the 6-WSON (2x2) package with exposed pad. PCB footprints, solder reflow profiles, and mounting procedures are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TLV76728DRVT and TLV76728DRVR are ROHS3 compliant, REACH Unaffected, and carry the same MSL 2 (1 Year) moisture sensitivity rating.

Q: What protection features are included in both parts?

A: Both parts include Over Current protection, Over Temperature protection, and UVLO (Under Voltage Lock Out) functionality with an Enable control feature.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 125°C junction temperature (TJ), suitable for industrial and extended temperature applications.