Request Quote
(Ships tomorrow)
TLV6001RIDBVT Equivalent & Substitute Parts
Part Overview
The TLV6001RIDBVT is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This device features rail-to-rail output capability and operates across a supply voltage range of 1.8 V to 5.5 V, making it suitable for low-voltage analog signal processing applications. The part is classified as "Not For New Designs," indicating it has been superseded in the manufacturer's product line. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and support legacy system maintenance.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | General Purpose | — |
| Number of Circuits | 1 | — |
| Output Type | Rail-to-Rail | — |
| Slew Rate | 0.5 | V/µs |
| Gain Bandwidth Product | 1 | MHz |
| Current - Input Bias | 1 | pA |
| Voltage - Input Offset | 750 | µV |
| Current - Supply | 75 | µA |
| Current - Output / Channel | 15 | mA |
| Voltage - Supply Span (Min) | 1.8 | V |
| Voltage - Supply Span (Max) | 5.5 | V |
| Operating Temperature | -40 to 125 | °C |
| Mounting Type | Surface Mount | — |
| Package / Case | SC-74A, SOT-753 | — |
| Supplier Device Package | SOT-23-5 | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) | — |
Substitute Part Grouping Explanation
Substitution of the TLV6001RIDBVT is determined by the following critical parameters:
Primary Substitution Criteria:
- Amplifier Type: General Purpose
- Number of Circuits: 1
- Output Type: Rail-to-Rail
- Voltage Supply Range: Minimum 1.8 V, Maximum 5.5 V
- Operating Temperature Range: -40°C to 125°C (or compatible subset)
- Mounting Type: Surface Mount
- Package Compatibility: SOT-23-5 or equivalent footprint
Secondary Performance Parameters:
- Slew Rate: 0.5 V/µs or greater
- Gain Bandwidth Product: 1 MHz or greater
- Current - Input Bias: 1 pA or lower
- Current - Supply: 75 µA or lower (preferred for low-power applications)
- Current - Output / Channel: 15 mA or greater
Substitute parts must satisfy all primary criteria. Secondary parameters may vary within acceptable engineering tolerances for the intended application. Parts are grouped by manufacturer and product status (Active vs. Not For New Designs).
Parameter Comparison
| Part Number | Manufacturer | Product Status | Slew Rate (V/µs) | GBW (MHz) | Input Bias (pA) | Input Offset (µV) | Supply Current (µA) | Output Current (mA) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Package | MSL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TLV6001RIDBVT | Texas Instruments | Not For New Designs | 0.5 | 1 | 1 | 750 | 75 | 15 | 1.8 | 5.5 | -40 to 125 | SOT-23-5 | 2 |
| TLV6001IDBVT | Texas Instruments | Active | 0.5 | 1 | 1 | 750 | 75 | — | 1.8 | 5.5 | -40 to 125 | SOT-23-5 | 2 |
| NCS20061SN2T1G | onsemi | Active | 1.2 | 3 | 1 | 500 | 140 | 19 | 1.8 | 5.5 | -40 to 125 | 5-TSOP | 1 |
| AD8541ARTZ-REEL | Analog Devices Inc. | Active | 0.92 | 1 | 4 | 1000 | 45 | 30 | 2.7 | 5.5 | -40 to 125 | SOT-23-5 | 1 |
| AD8541ARTZ-REEL7 | Analog Devices Inc. | Active | 0.92 | 1 | 4 | 1000 | 45 | 30 | 2.7 | 5.5 | -40 to 125 | SOT-23-5 | 1 |
| BU7241G-TR | Rohm Semiconductor | Active | 0.4 | 0.9 | 1 | 1000 | 70 | 12 | 1.8 | 5.5 | -40 to 85 | 5-SSOP | 1 |
| LMV321WG-7 | Diodes Incorporated | Active | 1 | 1 | 15 | 1700 | 110 | 90 | 2.7 | 5.5 | -40 to 85 | SOT-25 | 3 |
| MCP6001RT-E/OT | Microchip Technology | Active | 0.6 | 1 | 1 | 4500 | 100 | 23 | 1.8 | 6 | -40 to 125 | SOT-23-5 | 1 |
| MCP6001RT-I/OT | Microchip Technology | Active | 0.6 | 1 | 1 | 4500 | 100 | 23 | 1.8 | 6 | -40 to 85 | SOT-23-5 | 1 |
| MCP6001T-E/OT | Microchip Technology | Active | 0.6 | 1 | 1 | 4500 | 100 | 23 | 1.8 | 6 | -40 to 125 | SOT-23-5 | 1 |
| MCP6001T-I/OT | Microchip Technology | Active | 0.6 | 1 | 1 | 4500 | 100 | 23 | 1.8 | 6 | -40 to 85 | SOT-23-5 | 1 |
Engineering Selection Recommendations
Direct Equivalent (Highest Compatibility):
TLV6001IDBVT is the direct Active equivalent from Texas Instruments. This part maintains identical electrical specifications and packaging to the TLV6001RIDBVT, differing only in product status. Selection of TLV6001IDBVT is appropriate for applications requiring exact parameter matching and continued support from the original manufacturer.
Primary Substitutes (SOT-23-5 Package, Full Temperature Range):
MCP6001T-E/OT and MCP6001RT-E/OT from Microchip Technology are functionally compatible substitutes. Both parts operate across the full -40°C to 125°C temperature range, maintain SOT-23-5 packaging, and support supply voltages from 1.8 V to 6 V. These parts exhibit slightly higher input offset voltage (4.5 mV vs. 750 µV) and marginally higher supply current (100 µA vs. 75 µA), but deliver equivalent gain-bandwidth product and slew rate performance within acceptable engineering tolerances.
Alternative Substitutes (Extended Temperature or Enhanced Performance):
AD8541ARTZ-REEL and AD8541ARTZ-REEL7 from Analog Devices Inc. provide full -40°C to 125°C temperature coverage in SOT-23-5 packaging. These parts feature lower supply current (45 µA) and higher output current capability (30 mA), though they require a minimum supply voltage of 2.7 V and exhibit higher input bias current (4 pA vs. 1 pA).
NCS20061SN2T1G from onsemi offers enhanced performance with higher slew rate (1.2 V/µs) and gain-bandwidth product (3 MHz), packaged in 5-TSOP format. This part maintains 1.8 V minimum supply voltage and full temperature range operation but requires PCB layout accommodation for the alternative package footprint.
Conditional Substitutes (Temperature or Package Limitations):
BU7241G-TR from Rohm Semiconductor operates only to 85°C maximum, limiting its use in applications requiring full -40°C to 125°C coverage. LMV321WG-7 from Diodes Incorporated similarly operates to 85°C and exhibits higher input bias current (15 nA) and input offset voltage (1.7 mV), with MSL rating of 3 requiring shorter shelf-life management.
Compliance and Certification:
All listed substitute parts maintain ROHS3 compliance and REACH Unaffected status, consistent with the original TLV6001RIDBVT. Moisture sensitivity levels vary from 1 (Unlimited) to 3 (168 Hours), affecting storage and handling requirements. Parts with MSL 1 rating provide superior shelf-life characteristics for inventory management.
Frequently Asked Questions (FAQ)
Q: Can MCP6001T-I/OT replace TLV6001RIDBVT in all applications?
A: MCP6001T-I/OT is functionally compatible for applications operating within -40°C to 85°C. For designs requiring full -40°C to 125°C operation, MCP6001T-E/OT is the appropriate selection. Both parts maintain identical electrical performance and SOT-23-5 packaging. Input offset voltage is higher (4.5 mV vs. 750 µV), which may affect precision analog circuits requiring offset trimming.
Q: What is the difference between MCP6001RT-E/OT and MCP6001T-E/OT?
A: Both parts are electrically identical with full -40°C to 125°C temperature range and SOT-23-5 packaging. The designation difference reflects packaging format: RT indicates Tape & Reel format, while T indicates standard Cut Tape format. Selection depends on procurement and assembly requirements.
Q: Why does NCS20061SN2T1G use a different package (5-TSOP) than the original part?
A: NCS20061SN2T1G is housed in 5-TSOP (Thin Small Outline Package) rather than SOT-23-5. While both are five-pin surface mount packages, the footprints differ. PCB layout modification is required for this substitution. The alternative package offers enhanced performance characteristics (higher slew rate and gain-bandwidth product) and improved moisture sensitivity rating (MSL 1).
Q: Is AD8541ARTZ-REEL suitable for 1.8 V supply applications?
A: No. AD8541ARTZ-REEL requires a minimum supply voltage of 2.7 V, making it unsuitable for applications operating at 1.8 V. For low-voltage designs, TLV6001IDBVT, MCP6001 series, or NCS20061SN2T1G are appropriate selections, all supporting 1.8 V minimum supply.
Q: What is the impact of higher input offset voltage in MCP6001 parts?
A: MCP6001 series exhibits 4.5 mV input offset voltage compared to 750 µV in TLV6001RIDBVT. For precision instrumentation or low-level signal conditioning, this difference may require offset trimming or calibration. For general-purpose applications with signal levels exceeding 100 mV, the difference is negligible.
Q: Can BU7241G-TR be used in automotive applications requiring -40°C to 125°C operation?
A: No. BU7241G-TR operates only to 85°C maximum temperature, limiting its use to applications with maximum operating temperature of 85°C or lower. For full automotive temperature range (-40°C to 125°C), select TLV6001IDBVT, MCP6001T-E/OT, AD8541ARTZ-REEL, or NCS20061SN2T1G.
Q: What does MSL rating mean for component storage?
A: Moisture Sensitivity Level (MSL) indicates maximum shelf-life before the component must be baked to remove absorbed moisture. MSL 1 (Unlimited) allows indefinite storage. MSL 2 (1 Year) requires use within one year of packaging. MSL 3 (168 Hours) requires use within one week. Parts with lower MSL ratings provide greater inventory flexibility.
Q: Are all substitute parts RoHS3 compliant?
A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH Unaffected status, consistent with environmental and regulatory requirements of the original TLV6001RIDBVT.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts