TLV2783IDGS Equivalent & Substitute Parts

Part Overview

The TLV2783IDGS is a general-purpose operational amplifier featuring dual circuits in a 10-VSSOP surface mount package. This device delivers rail-to-rail output capability with a 5V/µs slew rate and 8 MHz gain bandwidth product, suitable for low-voltage analog signal processing applications. The TLV2783IDGS is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure design continuity and procurement availability for new production runs and ongoing support.

Substiute Parts

TLV2783IDGS

Texas InstrumentsIn Stock: 2479TLV2783IDGS Datasheet

Current PartRFQ

TLV2783IDGSR

Texas InstrumentsIn Stock: 3723TLV2783IDGSR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2783IDGS is determined by strict equivalence across all electrical and mechanical parameters. The substitute part must maintain identical specifications for amplifier type, circuit count, output characteristics, frequency response, bias current, input offset voltage, supply current, output current capability, supply voltage range, operating temperature range, and physical package dimensions. Additionally, the substitute part must comply with the same regulatory standards including RoHS3 compliance, REACH status, and moisture sensitivity classification.

The TLV2783IDGSR qualifies as a direct substitute based on complete parameter alignment across all specified criteria. The primary distinction between these parts is packaging format: the TLV2783IDGS is supplied in individual packaging, while the TLV2783IDGSR is supplied in Tape & Reel (TR) format. Both parts share the identical 10-VSSOP device package and all electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The TLV2783IDGSR is the manufacturer-recommended substitute for the TLV2783IDGS. Both parts are manufactured by Texas Instruments and maintain complete electrical and mechanical equivalence across all specified parameters. The TLV2783IDGSR carries Active product status, ensuring ongoing availability and manufacturing support, whereas the TLV2783IDGS is designated Last Time Buy.

Selection between these parts is determined by procurement requirements and supply chain logistics. The TLV2783IDGSR in Tape & Reel format is suitable for high-volume automated assembly operations. The TLV2783IDGS in individual packaging may be appropriate for lower-volume applications or when tape and reel format is not required. Both parts satisfy identical regulatory compliance requirements including ROHS3 compliance and REACH unaffected status.

Current inventory levels indicate 3700 pieces of TLV2783IDGSR available, compared to 2392 pieces of TLV2783IDGS. For new designs and ongoing production, the TLV2783IDGSR is the appropriate selection due to its Active product status and higher inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the TLV2783IDGSR directly replace the TLV2783IDGS in existing designs?

A: Yes. The TLV2783IDGSR is electrically and mechanically equivalent to the TLV2783IDGS. All electrical parameters, operating characteristics, and physical package dimensions are identical. The parts are pin-compatible and functionally interchangeable.

Q: What is the difference between TLV2783IDGS and TLV2783IDGSR?

A: The primary difference is packaging format. The TLV2783IDGS is supplied in individual packaging, while the TLV2783IDGSR is supplied in Tape & Reel (TR) format. All electrical specifications and the 10-VSSOP device package are identical.

Q: Why is the TLV2783IDGS designated as Last Time Buy?

A: Last Time Buy status indicates that Texas Instruments has discontinued production of this part number. The TLV2783IDGSR, which carries Active status, is the recommended alternative for new production and ongoing applications.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the TLV2783IDGS and TLV2783IDGSR maintain identical compliance certifications: ROHS3 compliant, REACH unaffected, and Moisture Sensitivity Level 1 (Unlimited).

Q: Which part should be selected for new designs?

A: The TLV2783IDGSR is the appropriate selection for new designs. This part carries Active product status, ensuring long-term availability and manufacturing support. The TLV2783IDGS should not be selected for new designs due to Last Time Buy status.

Q: Are the package dimensions identical between these parts?

A: Yes. Both parts use the 10-VSSOP supplier device package with identical physical dimensions: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width). PCB footprints and assembly processes are identical.

Q: What is the supply voltage range for these operational amplifiers?

A: Both parts operate across a supply voltage span of 1.8 V minimum to 3.6 V maximum, making them suitable for low-voltage applications including battery-powered and portable systems.

Q: What is the operating temperature range?

A: Both the TLV2783IDGS and TLV2783IDGSR operate across the temperature range of -40°C to 125°C, suitable for industrial and extended-temperature applications.