TLV2764ID Equivalent & Substitute Parts

Part Overview

The TLV2764ID is a general-purpose operational amplifier featuring four independent circuits in a 14-SOIC surface-mount package. Manufactured by Texas Instruments, this rail-to-rail amplifier operates across a supply voltage range of 1.8 V to 3.6 V with low input bias current and moderate slew rate characteristics. The device is classified as Last Time Buy, indicating discontinued production status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and support long-term product availability for applications requiring this amplifier topology.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	4	—
Output Type	Rail-to-Rail	—
Slew Rate	0.23	V/µs
Gain Bandwidth Product	500	kHz
Current - Input Bias	3	pA
Voltage - Input Offset	550	µV
Current - Supply (x4 Channels)	20	µA
Current - Output / Channel	10.2	mA
Voltage - Supply Span (Min)	1.8	V
Voltage - Supply Span (Max)	3.6	V
Operating Temperature	-40 to 85	°C
Package / Case	14-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the TLV2764ID are grouped based on strict electrical and mechanical compatibility criteria. All substitutes maintain the following core requirements:

Mandatory Compatibility Parameters:

Four independent amplifier circuits
Rail-to-rail output configuration
14-SOIC surface-mount package (0.154", 3.90mm width)
Gain bandwidth product of 400 kHz or greater
Supply voltage range supporting minimum 1.8 V operation
Operating temperature range including -40°C to 85°C
RoHS3 compliance and MSL 1 rating

Substitution Categories:

Category 1: Direct Packaging Equivalents (Texas Instruments) TLV2764IDR represents the same base product (TLV2764) in alternative packaging (Cut Tape & Digi-Reel). Electrical specifications are identical to TLV2764ID. This substitute addresses supply chain continuity within the same manufacturer family.

Category 2: CMOS Amplifier Alternatives (Analog Devices) AD8619ARZ, AD8619ARZ-REEL7, AD8619WARZ-R7, and AD8619WARZ-RL are CMOS-based four-circuit amplifiers with identical package geometry. These parts feature lower input bias current (0.2 pA versus 3 pA) and extended maximum supply voltage (5 V versus 3.6 V). Slew rate is reduced to 0.1 V/µs. Operating temperature extends to 125°C.

Category 3: General-Purpose Amplifier Alternatives (Maxim Integrated) MAX4094ASD+, MAX4094ASD+T, MAX4294ESD+, and MAX4294ESD+T are general-purpose four-circuit amplifiers with identical package and circuit count. MAX4094 series supports 2.7 V to 6 V supply range. MAX4294 series operates 1.8 V to 5.5 V with reduced input bias current (15 nA) and lower input offset voltage (200 µV).

Category 4: General-Purpose Amplifier Alternative (Microchip Technology) MCP6244-E/SL is a general-purpose four-circuit amplifier with identical package configuration. This part features slightly higher slew rate (0.3 V/µs) and gain bandwidth product (550 kHz), with extended operating temperature to 125°C.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	GBW (kHz)	Input Bias (pA)	Input Offset (µV)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Output Current (mA)	Packaging
TLV2764ID	Texas Instruments	General Purpose	0.23	500	3	550	1.8	3.6	-40 to 85	10.2	Tube
TLV2764IDR	Texas Instruments	General Purpose	0.23	500	3	550	1.8	3.6	-40 to 85	10.2	Cut Tape & Digi-Reel
AD8619ARZ	Analog Devices	CMOS	0.1	400	0.2	400	1.8	5	-40 to 125	80	Tube
AD8619ARZ-REEL7	Analog Devices	CMOS	0.1	400	0.2	400	1.8	5	-40 to 125	80	Tape & Reel
AD8619WARZ-R7	Analog Devices	CMOS	0.1	400	0.2	400	1.8	5	-40 to 125	80	Tape & Reel
AD8619WARZ-RL	Analog Devices	CMOS	0.1	400	0.2	400	1.8	5	-40 to 125	80	Tape & Reel
MAX4094ASD+	Maxim Integrated	General Purpose	0.2	500	20000	30	2.7	6	-40 to 125	—	Tube
MAX4094ASD+T	Maxim Integrated	General Purpose	0.2	500	20000	30	2.7	6	-40 to 125	—	Tape & Reel
MAX4294ESD+	Maxim Integrated	General Purpose	0.2	500	15000	200	1.8	5.5	-40 to 85	20	Tube
MAX4294ESD+T	Maxim Integrated	General Purpose	0.2	500	15000	200	1.8	5.5	-40 to 85	20	Tape & Reel
MCP6244-E/SL	Microchip Technology	General Purpose	0.3	550	1	5000	1.8	5.5	-40 to 125	23	Tube

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance): TLV2764IDR is the primary substitute when maintaining exact electrical specifications is required. This part shares identical electrical characteristics with TLV2764ID and differs only in packaging format (Cut Tape & Digi-Reel versus Tube). Both are Texas Instruments products with RoHS3 compliance and MSL 1 rating. Selection between these two depends on assembly process requirements and tape-and-reel versus tube handling capabilities.

For Supply Voltage Extended Range Applications: AD8619ARZ, AD8619ARZ-REEL7, AD8619WARZ-R7, and AD8619WARZ-RL support maximum supply voltage of 5 V compared to 3.6 V for TLV2764ID. These CMOS alternatives are suitable for applications requiring higher supply voltage headroom. All four variants maintain identical electrical specifications and differ only in packaging format (Tube versus Tape & Reel). Extended operating temperature to 125°C is available with these parts.

For Low-Power Supply Applications: MAX4294ESD+ and MAX4294ESD+T maintain the 1.8 V minimum supply voltage requirement of TLV2764ID while offering extended maximum supply to 5.5 V. These parts feature reduced input bias current (15 nA) and lower input offset voltage (200 µV) compared to TLV2764ID. Operating temperature range matches TLV2764ID (-40°C to 85°C). Selection between Tube and Tape & Reel packaging depends on assembly requirements.

For Extended Temperature Range: MCP6244-E/SL, AD8619 series, and MAX4094 series all support operating temperatures to 125°C, compared to 85°C maximum for TLV2764ID. MCP6244-E/SL additionally provides higher slew rate (0.3 V/µs) and gain bandwidth product (550 kHz). All substitutes maintain RoHS3 compliance and MSL 1 rating.

Compliance and Certification: All listed substitute parts carry RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching TLV2764ID specifications. REACH status is Unaffected for all parts. ECCN classification is EAR99 across all alternatives.

Frequently Asked Questions (FAQ)

Q: Can TLV2764IDR be used as a direct replacement for TLV2764ID? A: Yes. TLV2764IDR is electrically identical to TLV2764ID. The only difference is packaging format: TLV2764IDR is supplied in Cut Tape & Digi-Reel format, while TLV2764ID is supplied in Tube. Both parts are manufactured by Texas Instruments with identical electrical specifications, RoHS3 compliance, and MSL 1 rating.

Q: What are the key differences between TLV2764ID and AD8619ARZ? A: Both are four-circuit rail-to-rail amplifiers in 14-SOIC packages. TLV2764ID is a general-purpose amplifier with 3 pA input bias current and 0.23 V/µs slew rate, operating from 1.8 V to 3.6 V. AD8619ARZ is a CMOS amplifier with 0.2 pA input bias current and 0.1 V/µs slew rate, operating from 1.8 V to 5 V. AD8619ARZ supports extended operating temperature to 125°C and higher output current (80 mA versus 10.2 mA).

Q: Which substitute part is best for battery-powered applications? A: MAX4294ESD+ or MAX4294ESD+T are optimal for battery-powered designs. These parts maintain the 1.8 V minimum supply voltage of TLV2764ID while offering lower input bias current (15 nA) and reduced input offset voltage (200 µV). Supply current is 100 µA across four channels, providing efficient power consumption for low-voltage battery systems.

Q: Are all substitute parts available in both Tube and Tape & Reel packaging? A: No. TLV2764ID is available in Tube only. TLV2764IDR is available in Cut Tape & Digi-Reel. AD8619 series is available in both Tube (AD8619ARZ) and Tape & Reel (AD8619ARZ-REEL7, AD8619WARZ-R7, AD8619WARZ-RL). MAX4094 and MAX4294 series are available in both Tube and Tape & Reel variants. MCP6244-E/SL is available in Tube only.

Q: What is the impact of using MAX4094ASD+ instead of TLV2764ID? A: MAX4094ASD+ requires minimum supply voltage of 2.7 V compared to 1.8 V for TLV2764ID, making it unsuitable for ultra-low-voltage applications. However, MAX4094ASD+ supports supply voltage up to 6 V and extended operating temperature to 125°C. Input bias current is significantly higher (20 nA versus 3 pA), and input offset voltage is lower (30 µV versus 550 µV).

Q: Can MCP6244-E/SL replace TLV2764ID in all applications? A: MCP6244-E/SL is mechanically and functionally compatible with TLV2764ID in 14-SOIC package. However, input offset voltage is significantly higher (5 mV versus 550 µV), which may affect precision analog applications. MCP6244-E/SL offers advantages in slew rate (0.3 V/µs versus 0.23 V/µs) and extended operating temperature (125°C versus 85°C).

Q: What is the difference between AD8619WARZ-R7 and AD8619WARZ-RL? A: Both parts are electrically identical CMOS four-circuit amplifiers with identical electrical specifications. The difference is in tape reel configuration: AD8619WARZ-R7 uses standard reel format, while AD8619WARZ-RL uses alternative reel format. Selection depends on assembly equipment compatibility and tape-reel handling specifications.

Q: Is TLV2764ID still in production? A: No. TLV2764ID is classified as Last Time Buy, indicating discontinued production. TLV2764IDR (Cut Tape & Digi-Reel variant) is listed as Active product status and represents the recommended path for continued supply. Alternative manufacturers' products (Analog Devices, Maxim Integrated, Microchip Technology) are all listed as Active.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message