TLV2764CD Equivalent & Substitute Parts

Part Overview

The TLV2764CD is a general-purpose operational amplifier featuring four independent circuits in a 14-SOIC surface mount package. This device is designed for rail-to-rail output applications with low power consumption and minimal input offset voltage. The TLV2764CD is currently in Last Time Buy status, indicating discontinued production. Identifying equivalent substitute parts is essential for design continuity, inventory management, and long-term product support.

Substiute Parts

TLV2764CD

Texas InstrumentsIn Stock: 721TLV2764CD Datasheet

Current PartRFQ

TLV2764IDR

Texas InstrumentsIn Stock: 1501TLV2764IDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2764CD is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 4 independent channels
• Output Type: Rail-to-Rail
• Slew Rate: 0.23 V/µs
• Gain Bandwidth Product: 500 kHz
• Current - Input Bias: 3 pA
• Voltage - Input Offset: 550 µV
• Current - Supply: 20 µA (x4 Channels)
• Current - Output / Channel: 10.2 mA
• Voltage - Supply Span: 1.8 V to 3.6 V

Mechanical Equivalence Criteria:

• Package / Case: 14-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Supplier Device Package: 14-SOIC

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The TLV2764IDR is the manufacturer-recommended substitute, produced by Texas Instruments under the same base product number (TLV2764) with identical electrical and mechanical specifications. The primary distinction is packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TLV2764IDR

The TLV2764IDR is the direct manufacturer-recommended substitute for the TLV2764CD. Both parts share identical electrical specifications, mechanical dimensions, and compliance certifications. The TLV2764IDR is currently in Active product status with higher inventory availability (1483 pcs vs. 707 pcs), ensuring long-term supply continuity.

Operational Temperature Consideration:

The TLV2764IDR supports an extended operating temperature range of -40°C to 85°C, compared to the TLV2764CD range of 0°C to 70°C. This expanded range provides additional design flexibility for applications requiring operation at lower or higher ambient temperatures.

Packaging Format Difference:

The TLV2764CD is supplied in Tube packaging, while the TLV2764IDR is supplied in Cut Tape (CT) and Digi-Reel® formats. Both formats are standard surface mount delivery methods. Selection between these formats depends on assembly line equipment compatibility and volume requirements.

Compliance Status:

Both parts maintain ROHS3 compliance, REACH unaffected status, and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with current manufacturing and environmental standards.

Frequently Asked Questions (FAQ)

Q: Can the TLV2764IDR be used as a direct replacement for the TLV2764CD in existing designs?

A: Yes. The TLV2764IDR is electrically and mechanically identical to the TLV2764CD. All electrical parameters, pin configuration, and package dimensions are equivalent. Direct substitution is supported without circuit modification.

Q: What is the difference between Tube and Cut Tape packaging?

A: Tube packaging supplies components in plastic tubes for manual or semi-automated assembly. Cut Tape and Digi-Reel® packaging supplies components on continuous tape for automated pick-and-place equipment. Both formats contain identical components; selection depends on assembly process requirements.

Q: Why does the TLV2764IDR have a wider operating temperature range?

A: The TLV2764IDR is specified for -40°C to 85°C operation, while the TLV2764CD is specified for 0°C to 70°C. This reflects different qualification and testing protocols. The TLV2764IDR's extended range provides additional design margin for temperature-sensitive applications.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the TLV2764CD and TLV2764IDR maintain identical RoHS3 compliance, REACH unaffected status, and MSL Level 1 ratings. No compliance differences exist between these parts.

Q: What inventory status should influence my substitution decision?

A: The TLV2764CD is in Last Time Buy status, indicating production discontinuation. The TLV2764IDR is in Active status with higher inventory availability (1483 pcs). For new designs or long-term production, the TLV2764IDR is the recommended choice to ensure supply continuity.

Q: Can I mix TLV2764CD and TLV2764IDR components in the same production batch?

A: Yes. Both parts are electrically and mechanically identical and can be used interchangeably within the same assembly. However, packaging format differences may require separate handling procedures depending on assembly equipment.

Q: What is the base product number for these parts?

A: The base product number is TLV2764. Both the TLV2764CD and TLV2764IDR are variants of this base product, differentiated by packaging format and product status.