TLV2762ID Equivalent & Substitute Parts

Part Overview

The TLV2762ID is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) rail-to-rail output device in an 8-SOIC surface mount package. This component is classified as a linear amplifier suitable for low-power applications requiring operation across a 1.8 V to 3.6 V supply voltage range.

The TLV2762ID is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent and substitute parts is necessary to ensure design continuity and procurement availability for new production runs and ongoing support of existing applications.

Substiute Parts

TLV2762ID

Texas InstrumentsIn Stock: 1947TLV2762ID Datasheet

Current PartRFQ

TLV2762IDR

Texas InstrumentsIn Stock: 17247TLV2762IDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2762ID is determined by electrical and mechanical parameter equivalence across the following critical criteria:

Electrical Parameters: Dual-channel general-purpose amplifier configuration with rail-to-rail output capability, operating across 1.8 V to 3.6 V supply voltage range, with matching slew rate (0.23 V/µs), gain bandwidth product (500 kHz), input bias current (3 pA), input offset voltage (550 µV), supply current per channel (20 µA), and output current per channel (10.2 mA).

Mechanical Parameters: Surface mount packaging in 8-SOIC form factor with 0.154" (3.90 mm) width, maintaining identical pinout and footprint compatibility.

Compliance Parameters: ROHS3 compliance, MSL Level 1 (unlimited moisture sensitivity), and REACH unaffected status.

The substitute part TLV2762IDR meets all specified electrical, mechanical, and compliance requirements and is functionally interchangeable with the TLV2762ID.

Parameter Comparison

Engineering Selection Recommendations

The TLV2762IDR is the direct substitute for the TLV2762ID. Both components are manufactured by Texas Instruments and share identical electrical specifications, mechanical packaging, and compliance certifications.

Product Status Consideration: The TLV2762ID is designated Last Time Buy, indicating end-of-life status. The TLV2762IDR maintains Active product status with significantly higher inventory availability (17,225 pieces versus 1,900 pieces), ensuring long-term procurement reliability and supply chain continuity.

Compliance and Regulatory: Both parts maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status, satisfying equivalent environmental and regulatory requirements for industrial and commercial applications.

Substitution Validity: Direct pin-for-pin and functional substitution is valid. No circuit redesign, PCB layout modification, or application firmware changes are required when transitioning from TLV2762ID to TLV2762IDR.

Frequently Asked Questions (FAQ)

Q: Can TLV2762IDR be used as a direct replacement for TLV2762ID in existing designs?

A: Yes. The TLV2762IDR is electrically and mechanically identical to the TLV2762ID. Pin configuration, package footprint, and all electrical parameters match exactly. No design modifications are necessary.

Q: What is the difference between TLV2762ID and TLV2762IDR?

A: The primary difference is product status and packaging designation. The TLV2762ID is Last Time Buy (discontinued), while the TLV2762IDR is Active production. Both share identical electrical specifications and 8-SOIC packaging. The "R" suffix in TLV2762IDR indicates a tape-and-reel packaging option, which is standard for high-volume procurement.

Q: Are there any supply chain advantages to using TLV2762IDR?

A: Yes. The TLV2762IDR has significantly higher inventory availability and Active product status, ensuring reliable long-term supply. The TLV2762ID, being Last Time Buy, has limited remaining stock and no future production.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TLV2762ID and TLV2762IDR are ROHS3 compliant, carry MSL Level 1 rating (unlimited moisture sensitivity), and are REACH unaffected. They satisfy identical environmental and regulatory requirements.

Q: Is PCB layout modification required when switching from TLV2762ID to TLV2762IDR?

A: No. Both components use the same 8-SOIC (0.154", 3.90mm width) package with identical pinout. Existing PCB designs require no modification.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by dual-channel configuration, rail-to-rail output, 1.8 V to 3.6 V supply voltage range, 0.23 V/µs slew rate, 500 kHz gain bandwidth product, 3 pA input bias current, 550 µV input offset voltage, 20 µA supply current per channel, and 10.2 mA output current per channel.

Q: Can TLV2762IDR be used in applications originally designed for TLV2762ID without performance degradation?

A: Yes. All electrical parameters, operating temperature range (-40°C to 85°C), and output characteristics are identical. Performance is equivalent across all specified operating conditions.