TLV2762CD Equivalent & Substitute Parts

Part Overview

The TLV2762CD is a general-purpose operational amplifier featuring dual circuits in a rail-to-rail configuration, packaged in an 8-SOIC surface mount format. This device is classified as Last Time Buy, indicating discontinued production status. The TLV2762CD operates across a supply voltage range of 1.8 V to 3.6 V with low power consumption characteristics suitable for battery-powered and portable applications.

Identification of equivalent and substitute parts is necessary due to the Last Time Buy status of the TLV2762CD. Alternative components with compatible electrical and mechanical specifications ensure design continuity and supply chain reliability for applications currently utilizing this device.

Substiute Parts

TLV2762CD

Texas InstrumentsIn Stock: 2203TLV2762CD Datasheet

Current PartRFQ

TLV2762CDR

Texas InstrumentsIn Stock: 2286TLV2762CDR Datasheet

MFR RecommendedRFQ

MAX492CSA+

Analog Devices Inc./Maxim IntegratedIn Stock: 1496MAX492CSA+ Datasheet

MFR RecommendedRFQ

MAX492CSA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 1362MAX492CSA+T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2762CD is determined by equivalence across the following critical parameters:

Mechanical Compatibility: All substitute parts maintain identical package specifications: 8-SOIC surface mount format with 0.154" (3.90mm) width. This ensures direct footprint compatibility on printed circuit boards.

Functional Equivalence: Substitute parts are classified as general-purpose operational amplifiers with dual circuits and rail-to-rail output configuration. All devices operate within the specified temperature range of 0°C to 70°C.

Electrical Performance: Substitute parts are grouped based on matching gain bandwidth product (500 kHz) and output type (rail-to-rail). Variations in slew rate, input bias current, input offset voltage, supply current, and output current per channel are documented in the parameter comparison table.

Supply Voltage Compatibility: The TLV2762CD operates at 1.8 V to 3.6 V. Substitute parts with extended supply voltage ranges (2.7 V to 6 V) are compatible with applications designed for the TLV2762CD, as the lower voltage threshold of substitute parts encompasses the original device's operating range.

Regulatory Compliance: All substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with current manufacturing and environmental standards.

Parameter Comparison

Engineering Selection Recommendations

TLV2762CDR (Texas Instruments)

The TLV2762CDR is the manufacturer-recommended direct substitute for the TLV2762CD. Both devices are produced by Texas Instruments and share identical electrical specifications across all measured parameters. The primary distinction is packaging format: TLV2762CDR is supplied in Tape & Reel (TR) configuration versus Tube packaging for the original part. TLV2762CDR maintains Active product status, ensuring continued availability and manufacturing support. This device is the preferred selection for applications requiring exact electrical performance matching and long-term supply assurance.

MAX492CSA+ and MAX492CSA+T (Analog Devices Inc./Maxim Integrated)

The MAX492CSA+ and MAX492CSA+T devices are functionally equivalent alternatives from Analog Devices Inc./Maxim Integrated. Both maintain identical electrical specifications and are available in Active product status. These devices differ from the TLV2762CD in the following parameters: increased input bias current (25 nA versus 3 pA), reduced input offset voltage (200 µV versus 550 µV), elevated supply current (150 µA versus 20 µA per dual channels), and increased output current per channel (30 mA versus 10.2 mA). The MAX492 series supports an extended supply voltage range of 2.7 V to 6 V, providing operational flexibility beyond the TLV2762CD's 1.8 V to 3.6 V range.

MAX492CSA+ is packaged in Tube format, while MAX492CSA+T is supplied in Cut Tape (CT) & Digi-Reel® configuration. Selection between these variants depends on procurement and assembly requirements.

Packaging and Compliance Considerations

All substitute parts maintain 8-SOIC surface mount packaging with identical footprint dimensions, enabling direct board-level substitution. All devices comply with ROHS3 environmental standards and carry MSL Level 1 moisture sensitivity ratings, meeting current manufacturing requirements.

Frequently Asked Questions (FAQ)

Q: Can the TLV2762CDR be used as a direct replacement for the TLV2762CD?

A: Yes. The TLV2762CDR is the manufacturer-recommended substitute and shares identical electrical specifications with the TLV2762CD. The only difference is packaging format (Tape & Reel versus Tube). Both devices are compatible at the circuit level and footprint level.

Q: What are the key differences between the TLV2762CD and MAX492CSA+ devices?

A: The devices share identical gain bandwidth product (500 kHz) and output type (rail-to-rail). Differences include: input bias current (3 pA for TLV2762CD versus 25 nA for MAX492CSA+), input offset voltage (550 µV versus 200 µV), supply current per dual channels (20 µA versus 150 µA), output current per channel (10.2 mA versus 30 mA), and supply voltage range (1.8–3.6 V versus 2.7–6 V). The MAX492CSA+ provides higher output drive capability and extended supply voltage compatibility.

Q: Are the MAX492CSA+ and MAX492CSA+T electrically identical?

A: Yes. Both devices have identical electrical specifications. The distinction is packaging format: MAX492CSA+ is supplied in Tube, while MAX492CSA+T is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on assembly and procurement workflow requirements.

Q: Will substituting the TLV2762CD with a MAX492 series device affect circuit performance?

A: Substitution with MAX492 devices introduces measurable differences in input bias current, input offset voltage, and supply current consumption. Applications sensitive to these parameters require circuit analysis to confirm compatibility. The extended supply voltage range of MAX492 devices (2.7–6 V) provides operational flexibility for designs originally constrained to the TLV2762CD's 1.8–3.6 V range.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The TLV2762CD, TLV2762CDR, MAX492CSA+, and MAX492CSA+T are all ROHS3 compliant with MSL Level 1 moisture sensitivity ratings, meeting current environmental and manufacturing standards.

Q: What is the significance of the TLV2762CD being classified as Last Time Buy?

A: Last Time Buy status indicates that Texas Instruments has discontinued production of the TLV2762CD. Existing inventory is available for a limited period. The TLV2762CDR (Active status) and MAX492 series devices (Active status) provide long-term supply alternatives for new designs and ongoing production requirements.

Q: Can the TLV2762CD be used in applications designed for the MAX492CSA+?

A: The TLV2762CD can be used in applications designed for the MAX492CSA+ provided that the circuit tolerates lower output current per channel (10.2 mA versus 30 mA) and higher input offset voltage (550 µV versus 200 µV). The TLV2762CD's lower supply current (20 µA versus 150 µA) offers power consumption advantages in battery-powered applications. Circuit-level analysis is required to confirm compatibility with specific application requirements.

Q: What packaging options are available for substitute parts?

A: TLV2762CDR is available in Tape & Reel (TR) format. MAX492CSA+ is available in Tube format. MAX492CSA+T is available in Cut Tape (CT) & Digi-Reel® format. All devices use identical 8-SOIC surface mount packages with 0.154" (3.90mm) width, ensuring footprint compatibility across all variants.