TLV2465CD Equivalent & Substitute Parts

Part Overview

The TLV2465CD is a general-purpose operational amplifier featuring four independent circuits in a 16-SOIC surface-mount package. This device is designed for rail-to-rail output applications with low input bias current and moderate bandwidth characteristics suitable for signal conditioning and general analog processing tasks.

The TLV2465CD is classified as an obsolete product. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production requirements for systems utilizing this amplifier configuration.

Substiute Parts

TLV2465CD

Texas InstrumentsIn Stock: 848TLV2465CD Datasheet

Current PartRFQ

TLV2465CDR

Texas InstrumentsIn Stock: 4329TLV2465CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2465CD is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 4 independent amplifiers
• Output Type: Rail-to-Rail
• Slew Rate: 1.6 V/µs
• Gain Bandwidth Product: 6.4 MHz
• Input Bias Current: 1.3 nA
• Input Offset Voltage: 500 µV
• Supply Current: 550 µA (x4 Channels)
• Output Current per Channel: 80 mA
• Supply Voltage Range: 2.7 V to 6 V
• Operating Temperature Range: 0°C to 70°C

Mechanical Equivalence Criteria:

• Package Type: 16-SOIC surface mount
• Package Dimensions: 0.154" width (3.90 mm)

Compliance Equivalence Criteria:

• RoHS3 Compliance
• Moisture Sensitivity Level 1

The TLV2465CDR is the manufacturer-recommended substitute, maintaining identical electrical specifications and mechanical packaging while differing only in product status (Active vs. Obsolete) and packaging format (Tape & Reel vs. standard).

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TLV2465CDR

The TLV2465CDR is the direct manufacturer-recommended substitute for the TLV2465CD. Both parts are manufactured by Texas Instruments and maintain complete electrical and mechanical equivalence across all specified parameters. The TLV2465CDR carries Active product status, ensuring ongoing manufacturer support and supply availability.

Compliance and Certification:

Both the TLV2465CD and TLV2465CDR maintain ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited), satisfying environmental and handling requirements for industrial and commercial applications.

Packaging Consideration:

The primary difference between these parts is packaging format. The TLV2465CDR is supplied in Tape & Reel (TR) format, which is standard for high-volume production environments. The TLV2465CD is supplied in standard packaging. This distinction does not affect electrical performance or mechanical compatibility in PCB assembly operations.

Supply Chain Status:

The TLV2465CD is classified as Obsolete. The TLV2465CDR, with Active status and higher inventory availability (4246 pieces in stock versus 743 pieces), is the recommended selection for new designs and ongoing production support.

Frequently Asked Questions (FAQ)

Q: Can the TLV2465CDR be used as a direct replacement for the TLV2465CD in existing designs?

A: Yes. The TLV2465CDR is electrically and mechanically identical to the TLV2465CD. All electrical parameters, supply voltage ranges, operating temperature specifications, and package dimensions are equivalent. The parts are pin-compatible and functionally interchangeable in circuit applications.

Q: What is the difference between TLV2465CD and TLV2465CDR?

A: The primary differences are product status and packaging format. The TLV2465CD is Obsolete and supplied in standard packaging. The TLV2465CDR is Active and supplied in Tape & Reel (TR) format for automated assembly. Electrical specifications and mechanical package dimensions are identical.

Q: Is the 16-SOIC package the same for both parts?

A: Yes. Both parts use the 16-SOIC package with identical dimensions (0.154" width, 3.90 mm). The package is suitable for surface-mount PCB assembly and is compatible with standard pick-and-place equipment.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both the TLV2465CD and TLV2465CDR are ROHS3 compliant and carry Moisture Sensitivity Level 1 (Unlimited). They meet identical environmental and regulatory requirements.

Q: Why should I select the TLV2465CDR over the TLV2465CD?

A: The TLV2465CDR is the manufacturer-recommended substitute with Active product status. This ensures ongoing manufacturer support, technical documentation availability, and supply chain reliability. The Obsolete status of the TLV2465CD indicates discontinued production and limited future availability.

Q: Are the electrical specifications identical between these parts?

A: Yes. The slew rate (1.6 V/µs), gain bandwidth product (6.4 MHz), input bias current (1.3 nA), input offset voltage (500 µV), supply current (550 µA), output current per channel (80 mA), and supply voltage range (2.7 V to 6 V) are identical for both parts.

Q: Can I use these parts in new product designs?

A: The TLV2465CDR is suitable for new designs due to its Active status. The TLV2465CD, being Obsolete, is not recommended for new designs. Use the TLV2465CDR to ensure long-term design support and component availability.