TLV2462AIP Equivalent & Substitute Parts

Part Overview

The TLV2462AIP is a general-purpose operational amplifier featuring dual circuits in an 8-PDIP through-hole package. This device is manufactured by Texas Instruments and provides rail-to-rail output capability with a supply voltage range of 2.7 V to 6 V. The TLV2462AIP is designated as Last Time Buy, indicating that the original part number is no longer in active production. Identifying equivalent and substitute parts is necessary to ensure continued design support, maintain supply chain continuity, and enable component selection for new designs requiring similar electrical and mechanical characteristics.

Substiute Parts

TLV2462AIP

Texas InstrumentsIn Stock: 2423TLV2462AIP Datasheet

Current PartRFQ

TLV2462IP

Texas InstrumentsIn Stock: 1402TLV2462IP Datasheet

MFR RecommendedRFQ

MCP6282-E/P

Microchip TechnologyIn Stock: 2277MCP6282-E/P Datasheet

MFR RecommendedRFQ

MCP6285-E/P

Microchip TechnologyIn Stock: 2683MCP6285-E/P Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2462AIP is determined by electrical and mechanical compatibility across the following critical parameters:

Mechanical Compatibility:

• Package type: 8-DIP (0.300", 7.62mm)
• Mounting type: Through Hole
• Pin count and footprint alignment

Electrical Compatibility:

• Amplifier type: General Purpose
• Number of circuits: 2
• Output type: Rail-to-Rail
• Operating temperature range: -40°C to 125°C
• Supply voltage span: Minimum 2.7 V, Maximum 6 V

Regulatory Compliance:

• RoHS3 Compliant
• REACH Unaffected status

Substitute parts must satisfy all mechanical requirements and operate within the specified supply voltage and temperature ranges. Variations in slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current per channel are permitted provided the substitute part meets or exceeds the functional requirements of the application circuit.

Parameter Comparison

Engineering Selection Recommendations

TLV2462IP (Texas Instruments)

The TLV2462IP is the direct active-production equivalent of the TLV2462AIP. Both parts share identical electrical specifications, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current. The TLV2462IP maintains the same 8-DIP through-hole package and operating temperature range. This part is designated as Active product status, ensuring continued availability and manufacturing support. Selection of TLV2462IP is appropriate for designs requiring direct replacement of the Last Time Buy TLV2462AIP without circuit modification.

MCP6282-E/P and MCP6285-E/P (Microchip Technology)

The MCP6282-E/P and MCP6285-E/P are functionally equivalent general-purpose dual operational amplifiers in 8-DIP through-hole packages. Both parts operate across the required temperature range and provide rail-to-rail output capability. These devices feature improved slew rate (2.5 V/µs versus 1.6 V/µs) and lower input bias current (1 pA versus 1.3 nA). The MCP6282-E/P and MCP6285-E/P are designated as Active product status. Both parts are ROHS3 Compliant and REACH Unaffected. Selection of these Microchip alternatives is appropriate for applications where the enhanced slew rate and reduced input bias current provide performance benefits. The reduced output current per channel (25 mA versus 80 mA) and lower maximum supply voltage (5.5 V versus 6 V) must be evaluated against application requirements.

Frequently Asked Questions (FAQ)

Q: Can the TLV2462IP be used as a direct replacement for the TLV2462AIP?

A: Yes. The TLV2462IP is the active-production equivalent of the TLV2462AIP. Both parts share identical electrical specifications, package type, and operating temperature range. No circuit modification is required for substitution.

Q: What are the key differences between the TLV2462AIP and the MCP6282-E/P?

A: The MCP6282-E/P features a higher slew rate (2.5 V/µs versus 1.6 V/µs) and lower input bias current (1 pA versus 1.3 nA). The MCP6282-E/P has reduced output current per channel (25 mA versus 80 mA) and a lower maximum supply voltage (5.5 V versus 6 V). Both parts are compatible with the 8-DIP through-hole package and -40°C to 125°C operating temperature range.

Q: Are the MCP6282-E/P and MCP6285-E/P electrically identical?

A: Yes. The MCP6282-E/P and MCP6285-E/P share identical electrical specifications, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current per channel. Both parts are available in the same 8-DIP through-hole package.

Q: What is the significance of the Last Time Buy status for the TLV2462AIP?

A: Last Time Buy status indicates that the TLV2462AIP is no longer in active production. Existing inventory may be available, but future manufacturing is not planned. For new designs or long-term production requirements, selection of an active-status equivalent such as TLV2462IP or the Microchip alternatives is recommended.

Q: Can I use the MCP6282-E/P in an application requiring 80 mA output current per channel?

A: No. The MCP6282-E/P provides a maximum output current of 25 mA per channel, compared to 80 mA for the TLV2462AIP. Applications requiring the higher output current must use the TLV2462IP or evaluate alternative amplifier architectures.

Q: Are all substitute parts RoHS3 Compliant?

A: Yes. The TLV2462IP, MCP6282-E/P, and MCP6285-E/P are all ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic components.

Q: What is the maximum supply voltage for the MCP6282-E/P and MCP6285-E/P?

A: The maximum supply voltage for both the MCP6282-E/P and MCP6285-E/P is 5.5 V. Applications requiring operation at 6 V must use the TLV2462AIP or TLV2462IP.

Q: Are the substitute parts available in the same through-hole package?

A: Yes. All substitute parts—TLV2462IP, MCP6282-E/P, and MCP6285-E/P—are available in the 8-DIP (0.300", 7.62mm) through-hole package, ensuring mechanical compatibility with existing printed circuit board designs.