TLV2460ID Equivalent & Substitute Parts

Part Overview

The TLV2460ID is a general-purpose operational amplifier manufactured by Texas Instruments, designed for rail-to-rail applications in 8-SOIC surface mount packaging. This device is classified as Last Time Buy, indicating discontinued production with limited remaining inventory. The identification of equivalent and substitute parts is necessary to ensure design continuity and procurement flexibility for applications requiring this amplifier topology.

Substiute Parts

TLV2460ID

Texas InstrumentsIn Stock: 1169TLV2460ID Datasheet

Current PartRFQ

TLV2460CDR

Texas InstrumentsIn Stock: 2217TLV2460CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2460ID is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 1.6 V/µs
• Gain Bandwidth Product: 6.4 MHz
• Current - Input Bias: 1.3 nA
• Voltage - Input Offset: 500 µV
• Current - Supply: 550 µA
• Current - Output / Channel: 80 mA
• Voltage - Supply Span: 2.7 V to 6 V

Mechanical Equivalence Criteria:

• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Supplier Device Package: 8-SOIC

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The TLV2460CDR meets all electrical, mechanical, and compliance requirements for direct substitution with the TLV2460ID.

Parameter Comparison

*Operating temperature range differs: TLV2460ID supports -40°C to 125°C; TLV2460CDR supports 0°C to 70°C. Substitution is valid only for applications within the 0°C to 70°C range.

Engineering Selection Recommendations

Direct Substitution Basis:

The TLV2460CDR is the manufacturer-recommended substitute for the TLV2460ID. Both devices share identical electrical specifications across all critical parameters: slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current capability, and supply voltage range.

Mechanical Compatibility:

Both parts utilize the 8-SOIC surface mount package with identical dimensions (0.154", 3.90mm width). PCB layout and footprint compatibility is assured.

Compliance Status:

Both devices maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring equivalent environmental and regulatory suitability.

Operational Temperature Consideration:

The TLV2460CDR operates within 0°C to 70°C, compared to the TLV2460ID range of -40°C to 125°C. Substitution is appropriate for applications operating within the narrower temperature window of the TLV2460CDR.

Packaging Difference:

The TLV2460ID is supplied in Tube packaging, while the TLV2460CDR is supplied in Tape & Reel (TR) format. This distinction affects procurement and assembly processes but does not impact electrical or mechanical performance.

Product Status:

The TLV2460ID is Last Time Buy status with 1088 units in stock. The TLV2460CDR is Active status with 2110 units in stock, providing superior long-term availability for ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can the TLV2460CDR replace the TLV2460ID in all applications?

A: The TLV2460CDR is electrically and mechanically equivalent to the TLV2460ID. However, substitution is valid only for applications operating within the 0°C to 70°C temperature range. Applications requiring operation below 0°C or above 70°C must retain the TLV2460ID or identify alternative solutions.

Q: What is the difference between Tube and Tape & Reel packaging?

A: Tube packaging supplies individual components in a plastic tube, suitable for manual handling and small-volume assembly. Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, optimized for automated pick-and-place assembly. Both formats contain identical components; the difference is in supply format and assembly compatibility.

Q: Are there any electrical performance differences between TLV2460ID and TLV2460CDR?

A: No. Both devices exhibit identical electrical specifications: 1.6 V/µs slew rate, 6.4 MHz gain bandwidth product, 1.3 nA input bias current, 500 µV input offset voltage, 550 µA supply current, and 80 mA output current per channel. Supply voltage range is identical at 2.7 V to 6 V.

Q: Why does the TLV2460CDR have a narrower operating temperature range?

A: The operating temperature range is a specified parameter that reflects the tested and validated performance envelope for each device variant. The TLV2460CDR is qualified for 0°C to 70°C operation. Applications requiring extended temperature performance must use the TLV2460ID.

Q: Is the TLV2460CDR suitable for high-volume production?

A: Yes. The TLV2460CDR is Active status with higher inventory availability (2110 units) compared to the Last Time Buy TLV2460ID (1088 units). Tape & Reel packaging is optimized for automated assembly processes typical of high-volume manufacturing.

Q: What compliance certifications apply to both devices?

A: Both the TLV2460ID and TLV2460CDR are ROHS3 compliant and REACH unaffected. Both maintain MSL Level 1 (Unlimited) moisture sensitivity rating. ECCN classification is EAR99 for both devices.

Q: Can I use TLV2460CDR in a design originally specified for TLV2460ID?

A: Yes, provided the application operates within 0°C to 70°C. Verify that your design does not require the extended temperature capability of the TLV2460ID. If temperature range is not a constraint, the TLV2460CDR is a direct functional replacement with superior availability.