TLV2460CDRG4 Equivalent & Substitute Parts

Part Overview

The TLV2460CDRG4 is a general-purpose operational amplifier manufactured by Texas Instruments, designed for rail-to-rail applications in low-voltage environments. This device features a single amplifier circuit in an 8-SOIC surface-mount package and is suitable for applications requiring low input bias current and moderate bandwidth performance.

The TLV2460CDRG4 is currently discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this component.

Substiute Parts

TLV2460CDRG4

Texas InstrumentsIn Stock: 1082TLV2460CDRG4 Datasheet

Current PartRFQ

TLV2460CDR

Texas InstrumentsIn Stock: 2217TLV2460CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLV2460CDRG4 are identified based on electrical and mechanical parameter equivalence within the general-purpose operational amplifier category. The substitution logic is based on the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: General Purpose
• Number of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 1.6 V/µs
• Gain Bandwidth Product: 6.4 MHz
• Current - Input Bias: 1.3 nA
• Voltage - Input Offset: 500 µV
• Current - Supply: 550 µA
• Current - Output / Channel: 80 mA
• Voltage - Supply Span: 2.7 V to 6 V
• Operating Temperature: 0°C to 70°C

Mechanical Equivalence Criteria:

• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Supplier Device Package: 8-SOIC

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Substitute parts must match all electrical parameters, mechanical specifications, and compliance certifications to ensure direct functional and physical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The TLV2460CDR is a direct electrical and mechanical equivalent to the TLV2460CDRG4. All specified electrical parameters, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current capability, and supply voltage range, are identical between the two parts.

Both components are manufactured by Texas Instruments, packaged in 8-SOIC surface-mount configuration, and comply with ROHS3 and REACH requirements. The Moisture Sensitivity Level (MSL) rating of 1 (Unlimited) is equivalent for both parts.

The primary distinction is product status: the TLV2460CDRG4 is discontinued at DiGi Electronics, while the TLV2460CDR maintains active status. The TLV2460CDR is supplied in Tape & Reel (TR) packaging format, which is standard for high-volume production environments.

For applications currently utilizing the TLV2460CDRG4, the TLV2460CDR provides full functional and physical compatibility without design modification or circuit re-qualification.

Frequently Asked Questions (FAQ)

Q: Can the TLV2460CDR be used as a direct replacement for the TLV2460CDRG4?

A: Yes. The TLV2460CDR is electrically and mechanically equivalent to the TLV2460CDRG4. All electrical parameters, package specifications, and compliance certifications are identical. The components are pin-compatible and functionally interchangeable.

Q: What is the difference between TLV2460CDRG4 and TLV2460CDR?

A: The primary difference is packaging format and product status. The TLV2460CDRG4 was supplied in standard packaging and is now discontinued at DiGi Electronics. The TLV2460CDR is the active equivalent supplied in Tape & Reel (TR) format, which is the standard packaging for production quantities.

Q: Are there any pin configuration differences between these parts?

A: No. Both parts use the 8-SOIC package with identical pin assignments. The physical footprint is 0.154" × 3.90mm width for both components.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the TLV2460CDRG4 and TLV2460CDR are ROHS3 compliant, REACH unaffected, and carry MSL rating of 1 (Unlimited). They meet identical environmental and regulatory requirements.

Q: What is the supply voltage range for these components?

A: Both parts operate with a supply voltage span from 2.7 V (minimum) to 6 V (maximum), making them suitable for low-voltage applications including battery-powered systems.

Q: What is the operating temperature range?

A: Both components are rated for operation from 0°C to 70°C.

Q: Can these parts be used in high-frequency applications?

A: The gain bandwidth product is 6.4 MHz for both parts. Applications requiring higher bandwidth performance would require alternative component selection.