TLV2434CD Equivalent & Substitute Parts

Part Overview

The TLV2434CD is a CMOS rail-to-rail operational amplifier featuring four independent circuits in a 14-SOIC surface mount package. Manufactured by Texas Instruments under the LinCMOS™ series, this device is classified as Last Time Buy, indicating discontinued production with limited inventory availability. The TLV2434CD operates across a 2.7V to 10V supply range with low input bias current (1 pA) and moderate slew rate (0.25V/µs), making it suitable for low-power analog signal conditioning applications.

Due to Last Time Buy status, equivalent and substitute parts are necessary to ensure long-term design continuity and supply chain reliability. Substitute devices must maintain functional compatibility through matching package geometry, pin configuration, and electrical operating parameters within acceptable design tolerances.

Key Parameters

Parameter	Value	Unit
Amplifier Type	CMOS	—
Number of Circuits	4	—
Output Type	Rail-to-Rail	—
Package / Case	14-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	2.7	V
Voltage - Supply Span (Max)	10	V
Slew Rate	0.25	V/µs
Gain Bandwidth Product	550	kHz
Current - Input Bias	1	pA
Voltage - Input Offset	300	µV
Current - Supply (x4 Channels)	100	µA
Current - Output / Channel	50	mA
Operating Temperature	0 to 70	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the TLV2434CD is determined by strict adherence to the following critical parameters:

Package Compatibility: All substitute parts must use the 14-SOIC (0.154", 3.90mm Width) surface mount package to ensure direct PCB footprint compatibility without layout redesign.

Circuit Configuration: All substitutes must provide four independent amplifier circuits in a single package to maintain pin-for-pin compatibility.

Output Architecture: Rail-to-rail output capability is required to preserve signal swing characteristics across the specified supply voltage range.

Supply Voltage Range: Substitute parts must operate within or exceed the 2.7V to 10V supply span. Parts with extended ranges (such as 1.8V to 12V) are acceptable as they encompass the original specification.

Electrical Performance Envelope: Substitutes are grouped into two categories based on performance tier:

Direct Equivalents (Tier 1): Parts with identical or near-identical electrical specifications, including slew rate, gain bandwidth product, input bias current, and output current per channel.
Functional Alternatives (Tier 2): Parts with enhanced electrical performance (higher slew rate, wider bandwidth, extended temperature range) that provide superior performance while maintaining backward compatibility through the same package and pin configuration.

Parameter Comparison

Parameter	TLV2434CD	TLV2434CDR	AD8040ARZ-REEL	AD8040ARZ-REEL7	MC33204DR2G
Manufacturer	Texas Instruments	Texas Instruments	Analog Devices Inc.	Analog Devices Inc.	onsemi
Amplifier Type	CMOS	CMOS	General Purpose	General Purpose	General Purpose
Number of Circuits	4	4	4	4	4
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Package / Case	14-SOIC	14-SOIC	14-SOIC	14-SOIC	14-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Voltage - Supply Span (Min)	2.7 V	2.7 V	2.7 V	2.7 V	1.8 V
Voltage - Supply Span (Max)	10 V	10 V	12 V	12 V	12 V
Slew Rate	0.25 V/µs	0.25 V/µs	63 V/µs	63 V/µs	1 V/µs
Gain Bandwidth Product	550 kHz	550 kHz	125 MHz	125 MHz	2.2 MHz
Current - Input Bias	1 pA	1 pA	700 nA	700 nA	80 nA
Voltage - Input Offset	300 µV	300 µV	1.6 mV	1.6 mV	10 mV
Current - Supply (x4 Channels)	100 µA	100 µA	1.4 mA	1.4 mA	900 µA
Current - Output / Channel	50 mA	50 mA	170 mA	170 mA	80 mA
Operating Temperature	0 to 70°C	0 to 70°C	-40 to 125°C	-40 to 125°C	-40 to 105°C
Product Status	Last Time Buy	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

TLV2434CDR (Texas Instruments): This part is the direct equivalent to TLV2434CD with identical electrical specifications and Active product status. TLV2434CDR is the primary recommended substitute, offering the same CMOS architecture, slew rate, gain bandwidth product, and supply current characteristics. Both parts maintain ROHS3 compliance and MSL Level 1 rating. Selection of TLV2434CDR eliminates performance variation while preserving the original design intent.

AD8040ARZ-REEL and AD8040ARZ-REEL7 (Analog Devices Inc.): These parts provide enhanced performance characteristics with significantly higher slew rate (63V/µs versus 0.25V/µs) and gain bandwidth product (125 MHz versus 550 kHz). Both maintain the 14-SOIC package and rail-to-rail output architecture. The extended operating temperature range (-40°C to 125°C) and higher output current per channel (170 mA versus 50 mA) support applications requiring improved dynamic response. These substitutes are suitable for designs where performance headroom is beneficial. Packaging differs between AD8040ARZ-REEL (Tape & Reel) and AD8040ARZ-REEL7 (Cut Tape & Digi-Reel®).

MC33204DR2G (onsemi): This part offers intermediate performance with 1V/µs slew rate and 2.2 MHz gain bandwidth product. The lower supply current (900µA versus 100µA for TLV2434CD) and extended minimum supply voltage (1.8V) provide advantages in battery-powered applications. The higher input offset voltage (10 mV) and input bias current (80 nA) represent trade-offs compared to the TLV2434CD. MC33204DR2G is suitable for cost-optimized designs where the performance envelope remains acceptable.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and 14-SOIC surface mount package compatibility, ensuring regulatory and manufacturing process alignment with the original specification.

Frequently Asked Questions (FAQ)

Q: Can TLV2434CDR be used as a direct replacement for TLV2434CD without circuit modification?

A: Yes. TLV2434CDR is electrically and mechanically identical to TLV2434CD. Both parts share the same CMOS amplifier architecture, 14-SOIC package, pin configuration, and electrical specifications including slew rate (0.25V/µs), gain bandwidth product (550 kHz), and supply voltage range (2.7V to 10V). No circuit redesign is required.

Q: What are the key differences between TLV2434CD and the AD8040ARZ-REEL series?

A: The primary differences are amplifier type (CMOS versus General Purpose), slew rate (0.25V/µs versus 63V/µs), gain bandwidth product (550 kHz versus 125 MHz), and operating temperature range (0°C to 70°C versus -40°C to 125°C). The AD8040 series provides significantly higher performance but consumes more supply current (1.4 mA versus 100 µA per four channels). Both maintain the 14-SOIC package and rail-to-rail output capability.

Q: Is MC33204DR2G suitable for low-power applications?

A: MC33204DR2G offers lower supply current (900 µA) compared to AD8040ARZ-REEL (1.4 mA) but higher than TLV2434CD (100 µA). The extended minimum supply voltage (1.8V) supports battery-powered designs. However, the higher input offset voltage (10 mV) and reduced slew rate (1V/µs) may impact precision analog applications requiring low offset specifications.

Q: Are all substitute parts available in the same packaging options?

A: All substitute parts use the 14-SOIC surface mount package. Packaging format differs: TLV2434CDR is supplied in Tube format, AD8040ARZ-REEL in Tape & Reel, AD8040ARZ-REEL7 in Cut Tape & Digi-Reel®, and MC33204DR2G in Cut Tape & Digi-Reel®. These packaging differences do not affect electrical performance or PCB compatibility.

Q: What is the impact of higher slew rate in AD8040 devices on circuit performance?

A: Higher slew rate (63V/µs versus 0.25V/µs) enables faster output voltage transitions, reducing settling time in transient applications. This characteristic is beneficial for high-frequency signal processing and fast switching applications. For low-frequency or DC-coupled applications, the slew rate difference has minimal impact on circuit behavior.

Q: Can TLV2434CD operate at supply voltages below 2.7V?

A: No. The TLV2434CD minimum supply voltage is 2.7V. MC33204DR2G supports operation down to 1.8V, making it suitable for lower voltage applications. Other substitutes (TLV2434CDR, AD8040ARZ-REEL, AD8040ARZ-REEL7) maintain the 2.7V minimum specification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (TLV2434CDR, AD8040ARZ-REEL, AD8040ARZ-REEL7, MC33204DR2G) are ROHS3 compliant with MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original TLV2434CD specification.

Q: What is the significance of Last Time Buy status for TLV2434CD?

A: Last Time Buy indicates that Texas Instruments has discontinued production of TLV2434CD. Existing inventory is limited (1116 pieces reported), and no future production is planned. Designs using TLV2434CD should transition to TLV2434CDR (Active status) or alternative substitutes to ensure long-term supply chain continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message