TLV2375IPWRG4 Equivalent & Substitute Parts

Part Overview

The TLV2375IPWRG4 is a general-purpose operational amplifier featuring four independent circuits in a 16-TSSOP surface mount package. This device is designed for rail-to-rail output applications with low input bias current and moderate bandwidth characteristics suitable for signal conditioning and general analog processing tasks.

The TLV2375IPWRG4 is classified as obsolete. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for systems utilizing this component.

Substiute Parts

TLV2375IPWRG4

Texas InstrumentsIn Stock: 2165TLV2375IPWRG4 Datasheet

Current PartRFQ

TLV2375IPWR

Texas InstrumentsIn Stock: 3428TLV2375IPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2375IPWRG4 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier type: General Purpose
• Circuit count: 4 independent circuits
• Output configuration: Rail-to-Rail
• Slew rate: 2.1 V/µs
• Gain bandwidth product: 3 MHz
• Input bias current: 1 pA
• Input offset voltage: 2 mV
• Supply current: 750 µA (4 channels)
• Output current per channel: 16 mA
• Supply voltage range: 2.7 V to 16 V
• Operating temperature: -40°C to 125°C

Mechanical Equivalence Criteria:

• Package type: 16-TSSOP
• Mounting: Surface Mount
• Physical dimensions: 0.173" × 4.40mm width

The TLV2375IPWR meets all electrical and mechanical equivalence requirements and is identified as the manufacturer-recommended substitute.

Parameter Comparison

Engineering Selection Recommendations

The TLV2375IPWR is the direct equivalent substitute for the obsolete TLV2375IPWRG4. Selection of this substitute is based on the following engineering factors:

Product Status Consideration: The TLV2375IPWRG4 is classified as obsolete, whereas the TLV2375IPWR maintains active product status from Texas Instruments. This transition ensures continued availability and manufacturer support for new production and field replacements.

Compliance and Certification Alignment: Both parts maintain identical RoHS3 compliance, REACH unaffected status, and moisture sensitivity level (MSL 1). No additional qualification or compliance verification is required when transitioning from the main part to the substitute.

Electrical and Mechanical Equivalence: All electrical parameters, including slew rate, gain bandwidth product, input bias current, offset voltage, supply current, output current, and supply voltage range, are identical between the two parts. The 16-TSSOP surface mount package is mechanically identical, ensuring direct PCB compatibility without layout modifications.

Supply Chain Continuity: The TLV2375IPWR demonstrates higher inventory availability (3400 pieces in stock versus 2120 pieces for the obsolete variant), supporting reliable procurement for ongoing production requirements.

Frequently Asked Questions (FAQ)

Q: Can the TLV2375IPWR be used as a direct replacement for the TLV2375IPWRG4 without circuit modifications?

A: Yes. The TLV2375IPWR is electrically and mechanically equivalent to the TLV2375IPWRG4. All electrical parameters, including amplifier type, circuit count, output configuration, slew rate, bandwidth, bias current, offset voltage, supply current, output current, and supply voltage range are identical. The 16-TSSOP package dimensions and surface mount configuration are unchanged. No circuit modifications or PCB layout changes are required.

Q: What is the primary reason for substituting the TLV2375IPWRG4?

A: The TLV2375IPWRG4 is classified as obsolete. The TLV2375IPWR is the active equivalent from Texas Instruments, ensuring continued product availability, manufacturer support, and supply chain reliability for new production and field service applications.

Q: Are there any compliance or certification differences between the two parts?

A: No. Both the TLV2375IPWRG4 and TLV2375IPWR maintain identical RoHS3 compliance, REACH unaffected status, and moisture sensitivity level (MSL 1). No additional qualification or compliance documentation is required when transitioning to the substitute part.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is determined by equivalence across four-circuit general-purpose amplifier configuration, rail-to-rail output type, 2.1 V/µs slew rate, 3 MHz gain bandwidth product, 1 pA input bias current, 2 mV input offset voltage, 750 µA total supply current, 16 mA per-channel output current, and 2.7 V to 16 V supply voltage range. All parameters must match exactly.

Q: Is the packaging identical between the TLV2375IPWRG4 and TLV2375IPWR?

A: Yes. Both parts use the 16-TSSOP surface mount package with identical physical dimensions (0.173" × 4.40mm width). The parts are footprint-compatible and require no PCB modifications.

Q: What inventory status should be considered when selecting between these parts?

A: The TLV2375IPWR is the recommended substitute due to its active product status and higher inventory availability (3400 pieces in stock). The TLV2375IPWRG4 is obsolete with limited remaining inventory (2120 pieces). For new designs and ongoing production, the TLV2375IPWR should be specified.