TLV2362IPSR Equivalent & Substitute Parts

Part Overview

The TLV2362IPSR is a general-purpose operational amplifier featuring two independent circuits in an 8-SO surface mount package. This device is designed for low-power applications requiring dual-channel amplification with rail-to-rail performance across a 2V to 5V supply range.

The TLV2362IPSR is classified as obsolete. Locating equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications currently utilizing this component.

Substiute Parts

TLV2362IPSR

Texas InstrumentsIn Stock: 795TLV2362IPSR Datasheet

Current PartRFQ

TLV2362IDR

Texas InstrumentsIn Stock: 17642TLV2362IDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2362IPSR is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Amplifier Type: General Purpose
• Number of Circuits: 2
• Slew Rate: 3 V/µs
• Gain Bandwidth Product: 7 MHz
• Current - Input Bias: 20 nA
• Voltage - Input Offset: 1 mV
• Current - Supply: 1.75 mA (per channel)
• Current - Output / Channel: 20 mA
• Voltage - Supply Span: 2V to 5V
• Operating Temperature Range: -40°C to 85°C

Mechanical & Compliance Equivalence Requirements:

• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Base Product Number: TLV2362

The TLV2362IDR meets all electrical and compliance criteria. Package geometry differences exist between the 8-SO (0.209", 5.30mm width) and 8-SOIC (0.154", 3.90mm width) variants; however, both are standard surface mount packages with identical pin configurations and electrical performance.

Parameter Comparison

Engineering Selection Recommendations

The TLV2362IDR is the manufacturer-recommended substitute for the TLV2362IPSR. Both devices share identical electrical specifications, functional performance, and compliance certifications (ROHS3, MSL Level 1).

Selection Basis:

The TLV2362IDR is classified as an active product with current manufacturing support and significantly higher inventory availability (17,600 units in stock versus 716 units for the obsolete TLV2362IPSR). This ensures long-term supply chain continuity and reduces procurement risk.

Both parts are manufactured by Texas Instruments under the TLV2362 base product number and maintain full electrical equivalence across all specified parameters. The package geometry difference (8-SO versus 8-SOIC) does not affect electrical performance or pin functionality; however, PCB layout considerations must account for the dimensional variance if retrofitting existing designs.

The TLV2362IDR is suitable for direct substitution in applications currently specified for the TLV2362IPSR, provided that PCB footprint compatibility is verified during the design transition phase.

Frequently Asked Questions (FAQ)

Q: Are the TLV2362IPSR and TLV2362IDR electrically identical?

A: Yes. Both devices are manufactured by Texas Instruments and share identical electrical specifications, including slew rate (3 V/µs), gain bandwidth product (7 MHz), input bias current (20 nA), input offset voltage (1 mV), supply current (1.75 mA per channel), output current (20 mA per channel), and operating temperature range (-40°C to 85°C).

Q: What is the difference between the 8-SO and 8-SOIC packages?

A: Both are 8-pin surface mount packages with identical pin configurations and electrical performance. The primary difference is package body width: 8-SO measures 5.30mm width, while 8-SOIC measures 3.90mm width. PCB footprints differ accordingly. Pin pitch and electrical connectivity remain equivalent.

Q: Can I use the TLV2362IDR as a direct replacement on existing PCBs designed for the TLV2362IPSR?

A: Direct PCB replacement requires verification of footprint compatibility. The different package body widths necessitate layout review. If the existing PCB footprint accommodates the 8-SOIC (3.90mm width) package, substitution is straightforward. If the PCB is designed specifically for the 8-SO (5.30mm width) package, footprint modification is required.

Q: Why is the TLV2362IPSR classified as obsolete?

A: The TLV2362IPSR has reached end-of-life status. Texas Instruments continues to manufacture the TLV2362IDR variant as the active product line. The TLV2362IDR provides identical electrical performance with ongoing manufacturing support.

Q: Are both parts RoHS compliant?

A: Yes. Both the TLV2362IPSR and TLV2362IDR are ROHS3 compliant and carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What is the inventory status for each part?

A: The TLV2362IPSR (obsolete) has 716 units in stock. The TLV2362IDR (active) has 17,600 units in stock, providing significantly greater availability for new designs and ongoing production requirements.