TLV2304ID Equivalent & Substitute Parts Reference

Part Overview

The TLV2304ID is a linear amplifier and comparator integrated circuit manufactured by Texas Instruments in 14-SOIC surface mount packaging. This device is classified as Last Time Buy, indicating discontinued production with limited inventory availability. The TLV2304ID contains 2260 pieces in current stock. Due to its Last Time Buy status, identifying functionally equivalent substitute components is essential for design continuity and long-term supply chain planning. Substitute parts listed below maintain electrical and mechanical compatibility within the specified parameter ranges.

Substiute Parts

TLV2304ID

Texas InstrumentsIn Stock: 2292TLV2304ID Datasheet

Current PartRFQ

MAX994ESD+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2128MAX994ESD+T Datasheet

MFR RecommendedRFQ

MAX996ESD+

Analog Devices Inc./Maxim IntegratedIn Stock: 2246MAX996ESD+ Datasheet

MFR RecommendedRFQ

MAX996ESD+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2233MAX996ESD+T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLV2304ID are qualified based on the following criteria:

Mechanical Compatibility: All substitute parts utilize the 14-SOIC (0.154", 3.90mm Width) surface mount package, ensuring direct footprint compatibility on printed circuit boards.

Regulatory Compliance: All substitute parts maintain ROHS3 compliance and REACH unaffected status, matching the environmental and regulatory requirements of the original part.

Moisture Sensitivity: All substitute parts carry MSL rating of 1 (Unlimited), consistent with the TLV2304ID handling and storage requirements.

Functional Classification: Substitute parts are classified as General Purpose comparators with CMOS, Open-Drain, Rail-to-Rail, and TTL output types, providing functional equivalence for amplifier and comparator applications.

Supply Voltage Compatibility: All substitute parts operate within 2.5V to 5.5V single supply or ±1.25V to 2.75V dual supply ranges, supporting standard industrial and consumer voltage domains.

The three qualified substitute part numbers are MAX994ESD+T, MAX996ESD+, and MAX996ESD+T, all manufactured by Analog Devices Inc./Maxim Integrated.

Parameter Comparison

Engineering Selection Recommendations

Active Product Status Priority: All three substitute parts (MAX994ESD+T, MAX996ESD+, MAX996ESD+T) maintain Active product status with Analog Devices Inc./Maxim Integrated, ensuring long-term availability and continued manufacturing support. This contrasts with the TLV2304ID Last Time Buy designation and provides superior supply chain security for new designs and production continuity.

Packaging Format Considerations: The MAX996ESD+ is available in Tube packaging, matching the TLV2304ID format. The MAX994ESD+T and MAX996ESD+T are supplied in Tape & Reel format, which is standard for high-volume manufacturing and automated assembly processes. Selection between tube and tape & reel formats depends on production volume and assembly equipment capabilities.

Regulatory and Compliance Alignment: All substitute parts maintain identical ROHS3 compliance and REACH unaffected status as the original TLV2304ID, ensuring no additional regulatory burden or design modifications are required for environmental compliance.

Moisture Sensitivity Equivalence: MSL rating of 1 (Unlimited) across all parts eliminates moisture-related handling and storage constraints, supporting standard industrial logistics and storage conditions.

Electrical Performance Differentiation: MAX996ESD+ and MAX996ESD+T offer faster propagation delay (210ns maximum) compared to MAX994ESD+T (450ns maximum), with lower hysteresis (±2.5mV versus ±3mV). These characteristics may provide performance advantages in time-critical comparator applications. Quiescent current differs between MAX994ESD+T (24µA) and MAX996 variants (96µA), affecting power consumption in battery-powered or low-power applications.

Frequently Asked Questions (FAQ)

Q: Can MAX994ESD+T, MAX996ESD+, and MAX996ESD+T be used interchangeably with TLV2304ID?

A: All three substitute parts share identical 14-SOIC surface mount packaging, regulatory compliance (ROHS3, REACH), and moisture sensitivity ratings with the TLV2304ID. Mechanical and environmental compatibility is confirmed. Electrical performance parameters differ; selection depends on specific application requirements for propagation delay, quiescent current, and hysteresis specifications.

Q: What is the difference between MAX994ESD+T and MAX996ESD+ variants?

A: MAX994ESD+T and MAX996ESD+ differ in propagation delay (450ns versus 210ns), quiescent current (24µA versus 96µA), and hysteresis (±3mV versus ±2.5mV). MAX994ESD+T is supplied in Tape & Reel format; MAX996ESD+ is supplied in Tube format. MAX996ESD+T combines MAX996 electrical specifications with Tape & Reel packaging.

Q: Does packaging format (Tube versus Tape & Reel) affect electrical performance?

A: Packaging format does not affect electrical performance or functional characteristics. Format selection is determined by manufacturing and assembly requirements. Tube packaging suits lower-volume or manual assembly processes; Tape & Reel format is optimized for automated high-volume production.

Q: Are all substitute parts available in equivalent inventory quantities?

A: Current inventory levels are comparable across all parts: MAX994ESD+T (2100 Pcs), MAX996ESD+ (2200 Pcs), MAX996ESD+T (2220 Pcs), and TLV2304ID (2260 Pcs). All parts maintain adequate stock for immediate procurement.

Q: What is the significance of Active product status for substitute parts?

A: Active product status indicates ongoing manufacturing and long-term availability commitment from Analog Devices Inc./Maxim Integrated. This contrasts with the TLV2304ID Last Time Buy status, which signals discontinued production. Active status provides supply chain security and eliminates obsolescence risk for future production runs and design revisions.

Q: Do substitute parts require PCB layout or design modifications?

A: No design modifications are required. All substitute parts utilize the identical 14-SOIC (0.154", 3.90mm Width) surface mount package, ensuring direct footprint compatibility without PCB redesign or layout changes.