TLV2264IDG4 Equivalent & Substitute Parts

Part Overview

The TLV2264IDG4 is a CMOS amplifier integrated circuit manufactured by Texas Instruments, featuring four independent rail-to-rail operational amplifier circuits in a 14-SOIC surface mount package. This device is designed for low-power, general-purpose analog signal processing applications requiring dual supply operation or single supply configurations within the 2.7V to 8V range.

The TLV2264IDG4 is currently discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this component.

Substiute Parts

TLV2264IDG4

Texas InstrumentsIn Stock: 1175TLV2264IDG4 Datasheet

Current PartRFQ

TLV2264ID

Texas InstrumentsIn Stock: 886TLV2264ID Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2264IDG4 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: CMOS
• Number of Circuits: 4 independent channels
• Output Type: Rail-to-Rail
• Slew Rate: 0.55 V/µs
• Gain Bandwidth Product: 710 kHz
• Current - Input Bias: 50 pA
• Voltage - Input Offset: 300 µV
• Current - Supply: 1.5 mA (x4 Channels)
• Current - Output / Channel: 50 mA
• Voltage - Supply Span: 2.7V to 8V
• Operating Temperature Range: -40°C to 125°C

Mechanical Equivalence Criteria:

• Mounting Type: Surface Mount
• Package / Case: 14-SOIC (0.154", 3.90mm Width)

Compliance Equivalence Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must match all electrical, mechanical, and compliance parameters without deviation. Packaging format differences (such as tube versus tape-and-reel) do not affect functional equivalence but may impact procurement and handling procedures.

Parameter Comparison

Engineering Selection Recommendations

The TLV2264ID is the direct functional equivalent of the TLV2264IDG4. Both devices are manufactured by Texas Instruments and share identical electrical specifications, mechanical packaging, and compliance certifications.

Selection Basis:

The primary distinction between these parts is product status and packaging format. The TLV2264IDG4 is discontinued at DiGi Electronics, whereas the TLV2264ID maintains active product status. The TLV2264ID is packaged in tube format, while the TLV2264IDG4 uses tape-and-reel packaging. Both formats contain the same die and deliver identical performance characteristics.

For applications currently using the TLV2264IDG4, the TLV2264ID provides complete functional substitution without circuit redesign or performance degradation. The packaging format difference does not affect electrical operation and represents a standard industry variation in component distribution methods.

Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, supporting environmental and regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can the TLV2264ID directly replace the TLV2264IDG4 in existing circuit designs?

A: Yes. The TLV2264ID is electrically and mechanically equivalent to the TLV2264IDG4. All electrical parameters, pin configurations, and package dimensions are identical. No circuit modifications are required.

Q: What is the difference between the TLV2264IDG4 and TLV2264ID part numbers?

A: The suffix "G4" in TLV2264IDG4 indicates tape-and-reel packaging format, while "ID" in TLV2264ID indicates tube packaging. The base product number TLV2264 is identical, and the die specifications are unchanged. The packaging format difference does not affect electrical performance.

Q: Are there any compliance or certification differences between these parts?

A: No. Both the TLV2264IDG4 and TLV2264ID carry identical RoHS3 compliance status and moisture sensitivity level (MSL 1 - Unlimited). Both are suitable for applications with equivalent environmental and regulatory requirements.

Q: What is the pin configuration for the 14-SOIC package?

A: Both parts use the standard 14-SOIC (0.154", 3.90mm Width) package. Pin assignments and functional configurations are identical between the two part numbers.

Q: Why is the TLV2264IDG4 discontinued while the TLV2264ID remains active?

A: Product discontinuation decisions are based on market demand and manufacturing priorities. The TLV2264ID remains in active production and is the recommended source for new procurement. Existing inventory of the TLV2264IDG4 may still be available through authorized distributors.

Q: Can I mix TLV2264IDG4 and TLV2264ID components in the same production batch?

A: Yes. Both parts are functionally identical and can be used interchangeably within the same assembly. Packaging format differences do not affect circuit operation or performance.

Q: What supply voltage range is supported by both parts?

A: Both the TLV2264IDG4 and TLV2264ID operate across a supply voltage span of 2.7V to 8V, supporting single-supply and dual-supply configurations.

Q: What is the operating temperature range for these devices?

A: Both parts operate across the temperature range of -40°C to 125°C (TA), suitable for industrial and extended commercial applications.