TLV2262IPW Equivalent & Substitute Parts

Part Overview

The TLV2262IPW is a CMOS dual-channel operational amplifier manufactured by Texas Instruments, designed for rail-to-rail signal conditioning applications. This device features low input bias current, minimal input offset voltage, and operates across a wide supply voltage range of 2.7 V to 8 V. The TLV2262IPW is classified as an obsolete product, necessitating identification of equivalent substitute components for ongoing design requirements and production continuity. The primary substitute maintains identical electrical performance while offering improved availability through active product status.

Substiute Parts

TLV2262IPW

Texas InstrumentsIn Stock: 1541TLV2262IPW Datasheet

Current PartRFQ

TLV2262IPWR

Texas InstrumentsIn Stock: 25251TLV2262IPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV2262IPW is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute, TLV2262IPWR, maintains identical specifications across all critical performance metrics: CMOS amplifier topology, dual-circuit configuration, rail-to-rail output capability, slew rate of 0.55 V/µs, gain bandwidth product of 710 kHz, input bias current of 1 pA, input offset voltage of 300 µV, supply current of 1.8 mA per channel, output current of 50 mA per channel, and supply voltage range of 2.7 V to 8 V. Both devices operate across the temperature range of -40°C to 125°C and are packaged in the 8-TSSOP surface-mount configuration with identical physical dimensions.

The key differentiator between the TLV2262IPW and TLV2262IPWR is packaging format: the original part is supplied in Tube packaging, while the substitute is supplied in Tape & Reel (TR) format. Both share the same base product number (TLV2262), series designation (LinCMOS™), and compliance certifications (ROHS3 Compliant, REACH Unaffected, MSL 1). The TLV2262IPWR maintains active product status with significantly higher inventory availability (25,200 pieces) compared to the obsolete TLV2262IPW (1,475 pieces).

Parameter Comparison

Engineering Selection Recommendations

The TLV2262IPWR is the direct equivalent substitute for the TLV2262IPW. Both components are manufactured by Texas Instruments and share identical electrical specifications, thermal operating range, and mechanical package dimensions. The substitution is valid for all applications where the TLV2262IPW was originally specified.

Selection of TLV2262IPWR over the obsolete TLV2262IPW is supported by the following factors:

Product Status: The TLV2262IPWR maintains active product status with Texas Instruments, ensuring continued availability and manufacturing support. The TLV2262IPW is classified as obsolete, indicating discontinued production and limited remaining inventory.

Compliance Certifications: Both parts maintain identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and Moisture Sensitivity Level 1 (Unlimited). No regulatory or environmental restrictions differentiate the two parts.

Inventory Availability: The TLV2262IPWR demonstrates significantly higher inventory availability (25,200 pieces) compared to the TLV2262IPW (1,475 pieces), supporting long-term supply chain continuity.

Packaging Consideration: The only technical difference between the two parts is packaging format. The TLV2262IPW is supplied in Tube packaging, while the TLV2262IPWR is supplied in Tape & Reel (TR) format. Both formats are compatible with standard surface-mount assembly processes. Selection between these formats depends on production volume and assembly equipment capabilities.

Frequently Asked Questions (FAQ)

Q: Are the TLV2262IPW and TLV2262IPWR electrically identical?

A: Yes. Both parts are manufactured by Texas Instruments and share identical electrical specifications, including slew rate (0.55 V/µs), gain bandwidth product (710 kHz), input bias current (1 pA), input offset voltage (300 µV), supply current (1.8 mA per channel), output current (50 mA per channel), and supply voltage range (2.7 V to 8 V). Operating temperature range is identical at -40°C to 125°C.

Q: What is the difference between Tube and Tape & Reel packaging?

A: Tube packaging supplies individual components in a plastic tube, typically used for lower-volume applications or manual assembly. Tape & Reel (TR) packaging supplies components on a continuous reel of tape, designed for automated pick-and-place assembly equipment. Both formats contain the same component in the same 8-TSSOP package.

Q: Can I use TLV2262IPWR in place of TLV2262IPW without circuit modifications?

A: Yes. The TLV2262IPWR is a direct substitute for the TLV2262IPW. No circuit modifications are required. The component pinout, electrical performance, and package dimensions are identical.

Q: Why is the TLV2262IPW listed as obsolete?

A: The TLV2262IPW has been discontinued by Texas Instruments. The TLV2262IPWR remains in active production and is the recommended replacement for new designs and production continuity.

Q: Are both parts RoHS compliant?

A: Yes. Both the TLV2262IPW and TLV2262IPWR are ROHS3 Compliant and REACH Unaffected, with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the minimum order quantity for TLV2262IPWR?

A: Minimum order quantities depend on the supplier and packaging format selected. Tape & Reel (TR) format typically supports higher-volume orders, while Tube format may accommodate smaller quantities.

Q: Can I mix Tube and Tape & Reel packaging in the same production run?

A: Yes. Both packaging formats contain identical components. However, assembly equipment compatibility should be verified. Automated assembly lines typically require Tape & Reel format, while manual assembly or lower-volume production may use Tube format.