TLV0832IP Equivalent & Substitute Parts

Part Overview

The TLV0832IP is an 8-bit Analog to Digital Converter (ADC) manufactured by Texas Instruments, designed for data acquisition applications requiring single-ended or differential input configurations. This device features a Successive Approximation Register (SAR) architecture with an external reference type and operates across a 2.7V to 3.6V supply voltage range. The TLV0832IP is classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

TLV0832IP

Texas InstrumentsIn Stock: 966TLV0832IP Datasheet

Current PartRFQ

TLV0832CP

Texas InstrumentsIn Stock: 1255TLV0832CP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLV0832IP is determined by strict equivalence across the following critical parameters:

• Resolution: 8-bit ADC architecture
• Sampling Rate: 44.7k samples per second
• Input Configuration: Support for 1 or 2 inputs with differential and single-ended capability
• Data Interface: SPI protocol
• Supply Voltage Range: 2.7V to 3.6V for both analog and digital supplies
• Package Type: 8-DIP (0.300", 7.62mm) through-hole mounting
• Architecture: SAR-based conversion
• Reference Type: External reference requirement

The TLV0832CP qualifies as a direct substitute based on matching all electrical and mechanical parameters. The primary distinction is product status: the TLV0832CP is classified as active, whereas the TLV0832IP is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The TLV0832CP is the manufacturer-recommended substitute for the obsolete TLV0832IP. Both components maintain identical electrical specifications across resolution, sampling rate, input configuration, supply voltage, and data interface parameters. Both devices are ROHS3 compliant and carry EAR99 ECCN classification.

The operating temperature range differs between the two parts: the TLV0832IP operates from -40°C to 85°C, while the TLV0832CP operates from 0°C to 70°C. Applications requiring operation below 0°C or above 70°C must retain the TLV0832IP or identify alternative solutions outside this substitute relationship.

The TLV0832CP is available in active production status with established supply channels, whereas the TLV0832IP is obsolete. For new designs and ongoing system support, the TLV0832CP is the appropriate selection when operating temperature requirements fall within 0°C to 70°C.

Frequently Asked Questions (FAQ)

Q: Can the TLV0832CP directly replace the TLV0832IP in existing designs?

A: Yes, provided the application operating temperature range does not exceed the TLV0832CP specification of 0°C to 70°C. All electrical parameters, pin configurations, and package dimensions are identical.

Q: What is the primary difference between these two parts?

A: The TLV0832IP is obsolete, while the TLV0832CP is in active production. The operating temperature range of the TLV0832CP is narrower (0°C to 70°C versus -40°C to 85°C for the TLV0832IP).

Q: Are both parts pin-compatible?

A: Yes. Both the TLV0832IP and TLV0832CP use the 8-DIP (0.300", 7.62mm) through-hole package with identical pinout.

Q: What supply voltage is required for operation?

A: Both parts require 2.7V to 3.6V for analog and digital supplies. The external reference type requires a separate reference voltage source.

Q: Is the SPI interface identical between both parts?

A: Yes. Both components implement the same SPI data interface protocol for serial communication.

Q: What is the moisture sensitivity level for these parts?

A: The TLV0832IP has MSL 1 (Unlimited). The TLV0832CP has MSL Not Applicable.