TL-T5MF1 Equivalent & Substitute Parts

Part Overview

The Omron Automation and Safety TL-T5MF1 is an inductive proximity sensor with a 5mm sensing distance, designed for industrial detection applications requiring IP67 ingress protection. This sensor features PNP-NO output configuration with 3-wire termination and operates across a 10V to 30V supply voltage range.

The TL-T5MF1 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain system functionality and ensure continued availability for replacement, repair, and new installations where this sensor type is specified.

Substiute Parts

TL-T5MF1

Omron Automation and SafetyIn Stock: 960TL-T5MF1 Datasheet

Current PartRFQ

TL-W5MB1

Omron Automation and SafetyIn Stock: 721TL-W5MB1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TL-T5MF1 are identified based on strict equivalence of the following critical parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.197" (5mm)
• Output Type: PNP-NO, 3-Wire
• Voltage - Supply: 10V ~ 30V
• Ingress Protection: IP67
• Operating Temperature: -25°C ~ 70°C
• Termination Style: Cable Leads
• Material - Body: Plastic

The TL-W5MB1 meets all these core requirements and is therefore classified as a direct substitute. Variations in response frequency and product status do not affect functional substitution for standard inductive proximity sensing applications.

Parameter Comparison

Engineering Selection Recommendations

The TL-W5MB1 is the direct substitute for the obsolete TL-T5MF1. Both sensors share identical electrical and mechanical specifications across all critical parameters required for inductive proximity sensing applications.

The TL-W5MB1 offers the advantage of active product status, ensuring long-term availability and supply chain continuity. The higher response frequency of 500Hz (compared to 250Hz in the TL-T5MF1) provides improved detection speed without compromising compatibility in standard industrial applications.

Both parts carry identical export classification (EAR99) and tariff codes (HTSUS 8543.70.9860), simplifying procurement and regulatory compliance. The TL-W5MB1 is RoHS Compliant and REACH Affected, reflecting current environmental and safety standards.

Frequently Asked Questions (FAQ)

Q: Can the TL-W5MB1 directly replace the TL-T5MF1 in existing installations?

A: Yes. Both sensors share identical sensing distance, output type, supply voltage range, operating temperature, ingress protection rating, and termination style. Direct substitution is supported for all standard inductive proximity sensing applications.

Q: What is the difference in response frequency between these sensors?

A: The TL-W5MB1 operates at 500Hz compared to the TL-T5MF1 at 250Hz. This higher frequency in the substitute part enables faster detection cycles without affecting compatibility with standard control systems.

Q: Why is the TL-T5MF1 listed as obsolete?

A: Obsolete status indicates the part is no longer manufactured. The TL-W5MB1 is the active equivalent and is recommended for all new designs and replacement applications.

Q: Are there packaging differences between these parts?

A: The TL-T5MF1 is supplied in standard packaging, while the TL-W5MB1 is available in bulk packaging. Both use identical cable lead termination and module form factor.

Q: Do both sensors meet current compliance standards?

A: The TL-W5MB1 is RoHS Compliant and REACH Affected, reflecting current environmental regulations. Both parts share the same EAR99 export classification and HTSUS tariff code.