Omron TL-T5E1-7 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron TL-T5E1-7 is an inductive proximity sensor designed for non-contact detection applications requiring a 5mm sensing distance. This sensor operates with NPN-NO output configuration and is rated for IP67 ingress protection, making it suitable for industrial environments. The product is currently classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing system maintenance and new designs.

Substiute Parts

TL-T5E1-7

Omron Automation and SafetyIn Stock: 985TL-T5E1-7 Datasheet

Current PartRFQ

TL-W5MC1

Omron Automation and SafetyIn Stock: 1035TL-W5MC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL-T5E1-7 is based on strict equivalence of the following critical parameters:

• Sensor Type: Inductive (unchanged)
• Sensing Distance: 0.197" (5mm) (unchanged)
• Output Type: NPN-NO, 3-Wire (unchanged)
• Voltage Supply Range: 10V ~ 30V (unchanged)
• Ingress Protection Rating: IP67 (unchanged)
• Operating Temperature Range: -25°C ~ 70°C (unchanged)
• Material - Body: Plastic (unchanged)
• Indicator: LED (unchanged)
• Package / Case: Module (unchanged)

The TL-W5MC1 meets all critical electrical and mechanical parameters required for direct substitution. Differences in response frequency (250Hz vs. 500Hz), termination style (Connector vs. Cable Leads), and product status do not affect functional compatibility for standard inductive sensing applications.

Parameter Comparison

Engineering Selection Recommendations

The TL-W5MC1 is the direct functional equivalent for the obsolete TL-T5E1-7. Selection of the TL-W5MC1 is supported by:

• Active Product Status: The TL-W5MC1 maintains active production status, ensuring long-term availability and supply chain continuity.
• RoHS Compliance: The TL-W5MC1 is RoHS Compliant, meeting current environmental and regulatory requirements for electronic components.
• Electrical Equivalence: All critical electrical parameters (supply voltage, output type, sensing distance, operating temperature) are identical.
• Mechanical Equivalence: Both sensors share identical form factor, ingress protection rating, and material composition.

The higher response frequency of the TL-W5MC1 (500Hz vs. 250Hz) provides enhanced performance capability without compromising compatibility with existing system designs.

Frequently Asked Questions (FAQ)

Q: Can the TL-W5MC1 directly replace the TL-T5E1-7 in existing installations?

A: Yes. Both sensors share identical sensing distance (5mm), output type (NPN-NO, 3-Wire), supply voltage range (10V ~ 30V), operating temperature range (-25°C ~ 70°C), and ingress protection rating (IP67). The primary difference is termination style: the TL-T5E1-7 uses a connector interface while the TL-W5MC1 uses cable leads. Installation method must be adapted accordingly.

Q: What is the significance of the response frequency difference?

A: The TL-W5MC1 operates at 500Hz compared to the TL-T5E1-7 at 250Hz. This represents the maximum switching frequency capability. For standard inductive sensing applications, both frequencies are sufficient. Applications requiring high-speed object detection may benefit from the higher frequency of the TL-W5MC1.

Q: Are there compliance differences between these parts?

A: The TL-W5MC1 is RoHS Compliant and REACH Affected, while the TL-T5E1-7 is REACH Unaffected. Both carry the same ECCN and HTSUS classifications. For new designs and systems subject to RoHS requirements, the TL-W5MC1 is the appropriate selection.

Q: Does the cable leads termination of the TL-W5MC1 affect compatibility?

A: Termination style affects installation method only. The TL-T5E1-7 connector interface requires a mating connector, while the TL-W5MC1 cable leads require direct wiring. Electrical performance and sensing characteristics remain identical. Installation approach must be selected based on system design requirements.

Q: Is the TL-W5MC1 suitable for the same environmental conditions?

A: Yes. Both sensors operate across the identical temperature range (-25°C ~ 70°C) and maintain IP67 ingress protection. Environmental compatibility is fully maintained.