TLP785F(GR-TP7,F) Equivalent & Substitute Parts

Part Overview

The TLP785F(GR-TP7,F) is an optoisolator with transistor output manufactured by Toshiba Semiconductor and Storage. This component provides galvanic isolation up to 5000Vrms with a single channel configuration in a 4-SMD surface mount package. The part is currently active in production with 723 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, enabling procurement flexibility and supply chain continuity.

Substiute Parts

TLP785F(GR-TP7,F

Toshiba Semiconductor and StorageIn Stock: 808TLP785F(GR-TP7,F Datasheet

Current PartRFQ

TLP785(GR-TP6,F)

Toshiba Semiconductor and StorageIn Stock: 13910TLP785(GR-TP6,F) Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLP785F(GR-TP7,F) is determined by strict equivalence across the following critical parameters:

• Voltage isolation rating: 5000Vrms
• Number of channels: 1
• Output configuration: Transistor output
• Current transfer ratio range: 100% to 300% @ 5mA
• Maximum output voltage: 80V
• Maximum output current per channel: 50mA
• Operating temperature range: -55°C ~ 110°C
• Package type: 4-SMD, Gull Wing surface mount
• Supplier device package: 4-SMD

The substitute part TLP785F(GR-TP6,F) maintains all electrical and mechanical parameters identical to the main part. The difference between these variants is limited to packaging format (Tape & Reel versus standard packaging), which does not affect functional performance or electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both TLP785F(GR-TP7,F) and TLP785F(GR-TP6,F) are active production parts from Toshiba Semiconductor and Storage with identical electrical specifications and performance characteristics. Selection between these variants depends on procurement requirements and assembly processes. The TLP785F(GR-TP6,F) in Tape & Reel format is suitable for high-volume automated assembly operations, while the TLP785F(GR-TP7,F) standard packaging accommodates lower-volume or manual assembly workflows. Both parts carry MSL Level 1 (Unlimited) moisture sensitivity rating and comply with EAR99 export classification. RoHS compliance is confirmed for the TLP785F(GR-TP6,F) variant.

Frequently Asked Questions (FAQ)

Q: Can TLP785F(GR-TP6,F) be used as a direct replacement for TLP785F(GR-TP7,F)?

A: Yes. Both parts share identical electrical parameters, isolation voltage, output characteristics, and operating temperature range. The only difference is packaging format (Tape & Reel versus standard packaging). Functional performance and circuit compatibility are equivalent.

Q: What is the difference between the two part numbers?

A: The suffix designations (TP7 versus TP6) indicate different packaging formats. TLP785F(GR-TP7,F) uses standard packaging, while TLP785F(GR-TP6,F) is supplied in Tape & Reel format. Electrical specifications remain identical.

Q: Are there any compliance or certification differences?

A: Both parts carry the same ECCN (EAR99) and HTSUS (8541.49.8000) classifications. The TLP785F(GR-TP6,F) is explicitly confirmed as RoHS Compliant. Both maintain MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: Which variant should be selected for high-volume production?

A: The TLP785F(GR-TP6,F) in Tape & Reel format is optimized for automated pick-and-place assembly processes typical of high-volume manufacturing. The TLP785F(GR-TP7,F) standard packaging is suitable for lower-volume or manual assembly applications.

Q: Are the isolation voltage and output current specifications identical?

A: Yes. Both variants maintain 5000Vrms isolation voltage, 50mA maximum output current per channel, and 80V maximum output voltage. Current transfer ratio specifications (100% to 300% @ 5mA) are identical across both parts.