TLP627M(TP1,E Equivalent & Substitute Parts

Part Overview

The TLP627M(TP1,E is a Darlington output optoisolator manufactured by Toshiba Semiconductor and Storage. This component provides galvanic isolation with a 5000Vrms isolation voltage rating and is designed for DC input applications requiring high-speed switching performance. The part is currently in active production status with 722 units available in inventory. Alternative part numbers within the TLP627 series are available to support design flexibility and supply chain continuity.

Substiute Parts

TLP627M(TP1,E

Toshiba Semiconductor and StorageIn Stock: 824TLP627M(TP1,E Datasheet

Current PartRFQ

TLP627M(D4-TP5,E

Toshiba Semiconductor and StorageIn Stock: 4117TLP627M(D4-TP5,E Datasheet

Parametric EquivalentRFQ

TLP627MF(TP4,E

Toshiba Semiconductor and StorageIn Stock: 1814TLP627MF(TP4,E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the TLP627 series is based on electrical and mechanical parameter equivalence. The following criteria determine valid substitution:

• Isolation voltage: 5000Vrms (all variants maintain this specification)
• Number of channels: 1 (single-channel configuration)
• Output type: Darlington (consistent across all listed parts)
• Current transfer ratio: 1000% @ 1mA minimum (identical performance)
• Maximum output voltage: 300V
• Maximum output current: 150mA per channel
• Operating temperature range: -55°C ~ 110°C
• Mounting type: Surface Mount
• Package configuration: 4-SMD, Gull Wing

All substitute parts listed maintain identical electrical performance characteristics and mechanical compatibility with the primary part number TLP627M(TP1,E.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers—TLP627M(TP1,E, TLP627M(D4-TP5,E, and TLP627MF(TP4,E—are active production components from Toshiba Semiconductor and Storage with identical electrical specifications and mechanical compatibility. Selection between these variants may be based on inventory availability and packaging tape configuration differences. TLP627M(D4-TP5,E and TLP627MF(TP4,E both carry RoHS3 compliance and REACH unaffected status certifications. All parts are classified under ECCN EAR99 and HTSUS 8541.49.8000.

Frequently Asked Questions (FAQ)

Q: Can TLP627M(D4-TP5,E be used as a direct replacement for TLP627M(TP1,E?

A: Yes. Both parts share identical electrical parameters including isolation voltage, current transfer ratio, output voltage and current ratings, switching times, and operating temperature range. Both are surface-mount 4-SMD packages with Gull Wing configuration.

Q: What is the difference between the three substitute part numbers?

A: The three part numbers represent different tape and reel packaging configurations from Toshiba. The electrical and mechanical specifications are identical. The designations (TP1, D4-TP5, TP4) indicate different packaging tape formats used for automated assembly processes.

Q: Are there compliance differences between TLP627M(TP1,E and the substitute parts?

A: TLP627M(D4-TP5,E and TLP627MF(TP4,E carry explicit RoHS3 compliance and REACH unaffected certifications. All three parts are classified under the same ECCN and HTSUS codes.

Q: What inventory levels are available for each part number?

A: TLP627M(TP1,E has 722 units in stock, TLP627M(D4-TP5,E has 4104 units, and TLP627MF(TP4,E has 1754 units available as new original inventory.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. All three variants use identical 4-SMD Gull Wing surface-mount packages with the same pin configuration and electrical characteristics, allowing direct substitution in existing designs without circuit modifications.