TLP532(BL-TP1,F) Equivalent & Substitute Parts

Part Overview

The TLP532(BL-TP1,F) is a photocoupler optoisolator manufactured by Toshiba Semiconductor and Storage. This component is classified as obsolete, with 663 pieces currently available in new original stock. As an optoisolator output channel device, it provides electrical isolation between input and output circuits. Due to its obsolete status, identifying equivalent substitute parts is essential for ongoing system maintenance, redesign efforts, and procurement continuity.

Substiute Parts

TLP532(BL-TP1,F)

Toshiba Semiconductor and StorageIn Stock: 708TLP532(BL-TP1,F) Datasheet

Current PartRFQ

TLP785(BL-TP6,F

Toshiba Semiconductor and StorageIn Stock: 5436TLP785(BL-TP6,F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLP532(BL-TP1,F) are identified based on the following criteria:

• Manufacturer Alignment: Parts sourced from the same manufacturer (Toshiba Semiconductor and Storage) ensure design consistency and reliability heritage
• Product Category: Optoisolators within the same functional class maintain electrical isolation performance
• Active Product Status: Substitute parts must have active product status to ensure long-term availability and supply chain viability
• Compliance & Certification: Matching ECCN (EAR99) and HTSUS codes (8541.49.8000) ensure regulatory and trade compliance
• Moisture Sensitivity: MSL 1 (Unlimited) rating ensures compatibility with standard handling and storage procedures

The TLP785(BL-TP6,F) qualifies as a substitute based on these parameters, with the additional advantage of active product status and enhanced electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

The TLP532(BL-TP1,F) is classified as obsolete. For new designs and ongoing procurement, the TLP785(BL-TP6,F) is the appropriate substitute from Toshiba Semiconductor and Storage. Both components share identical regulatory compliance (ECCN: EAR99, HTSUS: 8541.49.8000) and moisture sensitivity ratings (MSL 1 - Unlimited), ensuring equivalent handling and storage requirements.

The TLP785(BL-TP6,F) maintains active product status, providing assured long-term availability and supply chain stability. This substitution is supported by common manufacturer heritage, identical product category classification, and aligned compliance certifications.

Frequently Asked Questions (FAQ)

Q: Why is the TLP532(BL-TP1,F) being phased out?

A: The TLP532(BL-TP1,F) has reached obsolete status. The TLP785(BL-TP6,F) is the active equivalent from the same manufacturer, ensuring continuity of optoisolator functionality with enhanced specifications.

Q: Are the TLP532 and TLP785 pin-compatible?

A: Both components are optoisolators from Toshiba. The TLP785(BL-TP6,F) uses a 4-DIP package (0.300", 7.62mm). Verify package compatibility with your PCB layout and schematic requirements before substitution.

Q: Do both parts have the same moisture sensitivity requirements?

A: Yes. Both the TLP532(BL-TP1,F) and TLP785(BL-TP6,F) carry MSL 1 (Unlimited) ratings, indicating no moisture sensitivity restrictions for handling, storage, or assembly.

Q: Are there any regulatory differences between these parts?

A: No. Both components share identical ECCN (EAR99) and HTSUS (8541.49.8000) classifications, ensuring equivalent regulatory and trade compliance.

Q: What are the key electrical differences?

A: The TLP785(BL-TP6,F) provides specified electrical parameters including 5000Vrms isolation voltage, 1 channel configuration, transistor output type, and operating temperature range of -55°C to 110°C. Verify these specifications against your circuit requirements.