TLP182(TPR,E Optoisolator Equivalent & Substitute Parts

Part Overview

The TLP182(TPR,E is a single-channel optoisolator with transistor output manufactured by Toshiba Semiconductor and Storage. This component provides galvanic isolation at 3750Vrms and is designed for applications requiring AC or DC input signal isolation with transistor-based output switching. The part is currently in active production status with 1116 pieces available in new original stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter range.

Substiute Parts

TLP182(TPR,E

Toshiba Semiconductor and StorageIn Stock: 1226TLP182(TPR,E Datasheet

Current PartRFQ

TLP182(TPL,E

Toshiba Semiconductor and StorageIn Stock: 4351TLP182(TPL,E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLP182(TPR,E is determined by strict equivalence across the following critical parameters:

• Isolation voltage: 3750Vrms minimum
• Number of channels: 1 channel configuration
• Output type: Transistor output
• Current transfer ratio range: 50% to 600% @ 5mA
• Switching timing: Turn on/off time 3µs typical, rise/fall time 2µs/3µs typical
• Maximum output voltage: 80V
• Maximum output current: 50mA per channel
• Vce saturation: 300mV maximum
• Operating temperature range: -55°C to 125°C
• Package type: 6-SOIC with 4 leads
• Input capability: AC and DC compatible

The substitute part TLP182(TPL,E maintains identical electrical specifications and mechanical compatibility. The primary distinction is packaging format: the main part uses tube packaging while the substitute uses tape and reel (TR) format. Both parts share the same base product number TLP182 and are manufactured by Toshiba Semiconductor and Storage.

Parameter Comparison

Engineering Selection Recommendations

Both TLP182(TPR,E and TLP182(TPL,E are active production components from Toshiba Semiconductor and Storage with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

The TLP182(TPR,E is supplied in tube packaging format and is suitable for manual assembly operations or lower-volume production runs.

The TLP182(TPL,E is supplied in tape and reel format and is optimized for automated pick-and-place assembly processes. This part carries ROHS3 compliance and REACH unaffected status certifications.

Both parts maintain MSL Level 1 (Unlimited) moisture sensitivity rating, indicating no special moisture control requirements during storage or handling.

Frequently Asked Questions (FAQ)

Q: Can TLP182(TPL,E be used as a direct replacement for TLP182(TPR,E in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: tube versus tape and reel. Circuit performance, pinout, and electrical characteristics are equivalent.

Q: What is the difference between tube and tape & reel packaging?

A: Tube packaging is used for manual handling and lower-volume assembly. Tape and reel packaging is designed for automated assembly equipment. The components themselves are identical; only the delivery format differs.

Q: Are there any compliance differences between these parts?

A: The TLP182(TPL,E specifies ROHS3 compliance and REACH unaffected status. The TLP182(TPR,E does not list these certifications in the provided data. Verify compliance requirements with your application specifications before selection.

Q: What is the MSL rating and why does it matter?

A: Both parts carry MSL Level 1 (Unlimited), meaning they have unlimited shelf life and require no special moisture control during storage or handling. This simplifies inventory management and reduces handling costs.

Q: Can these parts handle both AC and DC input signals?

A: Yes. Both TLP182(TPR,E and TLP182(TPL,E accept AC and DC input types, providing flexibility for various signal isolation applications.

Q: What is the maximum isolation voltage these parts provide?

A: Both parts provide 3750Vrms isolation voltage, suitable for high-voltage isolation applications requiring galvanic separation between input and output circuits.