TLP160J(DMT7-TPL,F Equivalent & Substitute Parts

Part Overview

The TLP160J(DMT7-TPL,F is a photocoupler optoisolator manufactured by Toshiba Semiconductor and Storage, classified as an optoisolator with single output channel functionality. This component is currently listed as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design requirements and component procurement.

Substiute Parts

TLP160J(DMT7-TPL,F

Toshiba Semiconductor and StorageIn Stock: 944TLP160J(DMT7-TPL,F Datasheet

Current PartRFQ

TLP265J(T7-TPL,E

Toshiba Semiconductor and StorageIn Stock: 9328TLP265J(T7-TPL,E Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TLP160J(DMT7-TPL,F has been identified with one equivalent substitute: TLP265J(T7-TPL,E. This substitution is based on the following criteria:

• Both components are optoisolators manufactured by Toshiba Semiconductor and Storage
• Both share identical ECCN (EAR99) and HTSUS (8541.49.8000) classifications
• Both maintain MSL Level 1 (Unlimited) moisture sensitivity rating
• Both are RoHS compliant components
• The TLP265J(T7-TPL,E represents an active product status alternative, ensuring long-term availability

The TLP265J(T7-TPL,E is a triac output optoisolator, indicating a different output topology compared to the original part. Substitution suitability depends on circuit requirements for triac-based isolation versus the original output configuration.

Parameter Comparison

Engineering Selection Recommendations

The TLP265J(T7-TPL,E is the identified substitute for the obsolete TLP160J(DMT7-TPL,F. Selection of this alternative is supported by:

• Active product status ensuring continued availability and supply chain reliability
• Identical regulatory classification (ECCN, HTSUS) and export compliance
• Matching MSL Level 1 rating for moisture sensitivity
• RoHS compliance certification
• Multi-agency approvals (CQC, cUR, UR) confirming regulatory acceptance

The transition from the original part to the substitute requires circuit-level evaluation due to the output topology difference (triac output configuration in the substitute). Pin configuration and electrical characteristics must be verified against application requirements before implementation.

Frequently Asked Questions (FAQ)

Q: Why is the TLP160J(DMT7-TPL,F listed as obsolete? A: The TLP160J(DMT7-TPL,F has reached end-of-life status. The TLP265J(T7-TPL,E is the active Toshiba alternative for new designs and ongoing procurement.

Q: Are the TLP160J(DMT7-TPL,F and TLP265J(T7-TPL,E pin-compatible? A: Both components use 6-pin packages (6-SOIC/6-SOP), but pin functionality differs due to the output topology change. Direct pin-for-pin substitution requires circuit verification.

Q: What is the key difference between these optoisolators? A: The TLP265J(T7-TPL,E features triac output with 3750Vrms isolation voltage, while the original part specifications for output type are not provided in this reference.

Q: Are both parts RoHS compliant? A: The TLP265J(T7-TPL,E is confirmed RoHS compliant. RoHS status for the original part is not specified in available documentation.

Q: What regulatory approvals apply to the substitute part? A: The TLP265J(T7-TPL,E holds CQC, cUR, and UR approvals, confirming compliance with multiple international standards.

Q: Can I use the TLP265J(T7-TPL,E in existing designs without modification? A: Circuit-level evaluation is required. The substitute's triac output configuration and electrical characteristics must be validated against the original application requirements.