TLE6255GNTMA1 Equivalent & Substitute Parts

Part Overview

The TLE6255GNTMA1 is a 1/1 full-duplex CANbus transceiver manufactured by Infineon Technologies, housed in a 14-SOIC surface mount package. This component is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production support. The part operates within a 4.75V to 5.25V supply voltage range and supports data rates up to 33 Kbps, with a receiver hysteresis of 200 mV across an operating temperature range of -40°C to 150°C.

Substiute Parts

TLE6255GNTMA1

Infineon TechnologiesIn Stock: 1160TLE6255GNTMA1 Datasheet

Current PartRFQ

MAX3054ASD+

Analog Devices Inc./Maxim IntegratedIn Stock: 12961MAX3054ASD+ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE6255GNTMA1 is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• Protocol: CANbus
• Number of Drivers/Receivers: 1/1
• Duplex: Full
• Package / Case: 14-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Voltage - Supply: 4.75V ~ 5.25V

The MAX3054ASD+ qualifies as a direct substitute because it maintains identical values across all critical parameters. While the MAX3054ASD+ exhibits higher performance specifications (250 Kbps data rate versus 33 Kbps, and 18 mV receiver hysteresis versus 200 mV), these represent functional enhancements that do not compromise compatibility in applications designed for the TLE6255GNTMA1.

Parameter Comparison

Engineering Selection Recommendations

The MAX3054ASD+ is the qualified substitute for the obsolete TLE6255GNTMA1. Selection of this substitute is supported by the following factors:

Product Status: The TLE6255GNTMA1 is classified as obsolete, necessitating transition to an active product. The MAX3054ASD+ maintains active product status with ongoing manufacturer support.

Compliance & Certifications: The MAX3054ASD+ achieves ROHS3 compliance, whereas the TLE6255GNTMA1 is RoHS non-compliant. Both components are REACH Unaffected and classified under ECCN EAR99. The MAX3054ASD+ provides improved regulatory alignment for new designs.

Electrical Compatibility: Both components operate within identical supply voltage ranges (4.75V ~ 5.25V) and share the same CANbus protocol implementation with 1/1 driver/receiver configuration and full-duplex operation. The MAX3054ASD+ supports higher data rates (250 Kbps) and lower receiver hysteresis (18 mV), representing functional improvements without introducing incompatibility.

Mechanical Compatibility: Both components utilize the 14-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm Width), ensuring direct PCB footprint compatibility.

Frequently Asked Questions (FAQ)

Q: Can the MAX3054ASD+ directly replace the TLE6255GNTMA1 on existing PCBs?

A: Yes. Both components share identical package geometry (14-SOIC, 0.154", 3.90mm Width) and surface mount configuration, enabling direct PCB footprint compatibility without layout modifications.

Q: Are there electrical differences between these components?

A: The MAX3054ASD+ operates at higher performance specifications: 250 Kbps data rate compared to 33 Kbps, and 18 mV receiver hysteresis compared to 200 mV. These represent functional enhancements. Both components maintain identical supply voltage requirements (4.75V ~ 5.25V) and CANbus protocol implementation.

Q: What is the operating temperature difference?

A: The TLE6255GNTMA1 operates from -40°C to 150°C, while the MAX3054ASD+ operates from -40°C to 125°C. Applications requiring operation above 125°C must retain the TLE6255GNTMA1 or identify alternative solutions.

Q: Does the MAX3054ASD+ meet current regulatory requirements?

A: Yes. The MAX3054ASD+ is ROHS3 compliant, whereas the TLE6255GNTMA1 is RoHS non-compliant. Both components are REACH Unaffected. The MAX3054ASD+ is recommended for new designs subject to RoHS requirements.

Q: What is the moisture sensitivity level for both components?

A: Both the TLE6255GNTMA1 and MAX3054ASD+ are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are there inventory considerations for this substitution?

A: The TLE6255GNTMA1 is available in limited quantities (1101 Pcs) as an obsolete component. The MAX3054ASD+ is actively manufactured with higher inventory availability (12900 Pcs), supporting sustained production requirements.