TLE6250PG CANbus Transceiver Equivalent & Substitute Parts

Part Overview

The TLE6250PG is a full-duplex CANbus transceiver manufactured by Infineon Technologies, designed for automotive and industrial communication applications. This component operates as a 1/1 transceiver with integrated driver and receiver functionality on a single chip. The part is classified as obsolete, making identification of equivalent and substitute components essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

TLE6250PG

Infineon TechnologiesIn Stock: 17880TLE6250PG Datasheet

Current PartRFQ

TLE6250GXUMA1

Infineon TechnologiesIn Stock: 29822TLE6250GXUMA1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE6250PG is determined by strict equivalence across the following critical parameters:

• Protocol Compatibility: CANbus protocol support
• Transceiver Configuration: 1/1 driver/receiver ratio with full-duplex operation
• Electrical Specifications: Voltage supply range (4.5V to 5.5V), data rate (1 MBd), and receiver hysteresis (150 mV)
• Operating Temperature Range: -40°C to 160°C
• Package Specification: 8-SOIC form factor with 0.154" (3.90mm) width
• Mounting Technology: Surface mount compatibility

The substitute part TLE6250GXUMA1 meets all these criteria, maintaining functional and electrical equivalence while differing in packaging format (Cut Tape & Digi-Reel) and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the TLE6250PG and TLE6250GXUMA1 are classified as obsolete products. Selection between these parts should be based on the following factors:

Compliance Requirements: The TLE6250GXUMA1 carries ROHS3 compliance certification, making it suitable for applications subject to Restriction of Hazardous Substances regulations. The TLE6250PG does not specify RoHS status.

Moisture Sensitivity: The TLE6250PG has MSL 1 (unlimited moisture sensitivity level), indicating superior moisture tolerance for storage and handling. The TLE6250GXUMA1 has MSL 3 (168 hours), requiring controlled storage conditions.

Packaging and Supply Chain: The TLE6250GXUMA1 is available in Cut Tape and Digi-Reel formats, which may align with specific procurement and assembly workflows. Both parts maintain identical electrical and functional specifications.

Regulatory Compliance: Both parts carry REACH Unaffected status and identical ECCN and HTSUS classifications, ensuring equivalent regulatory treatment.

Frequently Asked Questions (FAQ)

Q: Can TLE6250GXUMA1 be used as a direct replacement for TLE6250PG in existing designs?

A: Yes. Both parts are electrically and functionally equivalent across all critical parameters: CANbus protocol, 1/1 transceiver configuration, full-duplex operation, 1 MBd data rate, 4.5V to 5.5V supply voltage, -40°C to 160°C operating temperature, and 8-SOIC package. Pin-to-pin compatibility is maintained.

Q: What is the difference in moisture sensitivity between these parts?

A: TLE6250PG has MSL 1 (unlimited), allowing indefinite storage without moisture control. TLE6250GXUMA1 has MSL 3 (168 hours), requiring storage in controlled humidity conditions and baking before reflow if exposure limits are exceeded.

Q: Are there differences in compliance certifications?

A: TLE6250GXUMA1 is ROHS3 compliant; TLE6250PG does not specify RoHS status. Both are REACH Unaffected and share identical ECCN and HTSUS classifications.

Q: What packaging formats are available?

A: TLE6250PG is supplied in standard packaging. TLE6250GXUMA1 is available in Cut Tape (CT) and Digi-Reel® formats, offering flexibility for different assembly and procurement workflows.

Q: Are both parts still in production?

A: No. Both the TLE6250PG and TLE6250GXUMA1 are classified as obsolete products. Availability is limited to existing inventory from authorized distributors.