TLE2142MDR Equivalent & Substitute Parts

Part Overview

The TLE2142MDR is a general-purpose operational amplifier manufactured by Texas Instruments, featuring dual circuits in an 8-SOIC surface-mount package. This device is classified as Active product status and is RoHS3 compliant. The TLE2142MDR operates across a wide supply voltage range of 4V to 44V with rail-to-rail output capability, making it suitable for applications requiring broad voltage compatibility. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, supply chain considerations, or design optimization within the specified parameter constraints.

Key Parameters

Parameter	Value	Unit
Manufacturer Part Number	TLE2142MDR	—
Manufacturer	Texas Instruments	—
Category	Linear, Amplifiers	—
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Output Type	Rail-to-Rail	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	4	V
Voltage - Supply Span (Max)	44	V
Operating Temperature	-55°C ~ 125°C	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the TLE2142MDR are identified based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Mechanical Compatibility:

Package type: 8-SOIC surface-mount configuration
Pin count: 8 pins
Physical dimensions: 0.154" width (3.90mm)

Electrical Compatibility:

Number of circuits: 2 operational amplifiers per package
Supply voltage range: Minimum 4V to maximum 44V operation capability
Operating temperature range: -55°C to 125°C
RoHS3 compliance and MSL Level 1 rating

Substitute parts are grouped into two categories based on amplifier type: General Purpose amplifiers (matching the TLE2142MDR classification) and J-FET amplifiers (alternative topology with different input bias characteristics). All substitute parts maintain the 8-SOIC package format and dual-circuit configuration. Substitution validity is determined by whether the substitute part's supply voltage range encompasses the application requirements and whether the operating temperature range meets system specifications.

Parameter Comparison

Parameter	TLE2142MDR	AD8512ARZ	ADA4000-2ARZ	ADA4075-2ARZ	LT1057IS8#PBF
Amplifier Type	General Purpose	J-FET	J-FET	General Purpose	J-FET
Number of Circuits	2	2	2	2	2
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Voltage - Supply Span (Min)	4 V	10 V	8 V	9 V	20 V
Voltage - Supply Span (Max)	44 V	30 V	36 V	36 V	36 V
Operating Temperature (Min)	-55°C	-40°C	-40°C	-40°C	-40°C
Operating Temperature (Max)	125°C	125°C	125°C	125°C	85°C
Slew Rate	45 V/µs	20 V/µs	20 V/µs	12 V/µs	13 V/µs
Gain Bandwidth Product	5.9 MHz	8 MHz	5 MHz	6.5 MHz	5 MHz
Current - Input Bias	700 nA	25 pA	5 pA	30 nA	7 pA
Voltage - Input Offset	290 µV	100 µV	200 µV	200 µV	220 µV
Current - Supply	6.9 mA (x2)	2.2 mA (x2)	1.35 mA (x2)	1.8 mA (x2)	1.7 mA (x2)
Current - Output / Channel	50 mA	70 mA	28 mA	40 mA	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

General Purpose Amplifier Substitutes (Recommended Primary Alternatives):

The ADA4075-2ARZ, ADA4075-2ARZ-R7, and ADA4075-2ARZ-RL are classified as general-purpose amplifiers matching the TLE2142MDR topology. These parts maintain Active product status and RoHS3 compliance. The ADA4075 series operates within a 9V to 36V supply range, which is compatible with applications requiring supply voltages between 9V and 36V. The operating temperature range of -40°C to 125°C covers the upper portion of the TLE2142MDR specification. These substitutes are suitable for designs where the minimum supply voltage requirement is 9V or higher.

J-FET Amplifier Alternatives (Extended Input Impedance Applications):

The AD8512ARZ, AD8512ARZ-REEL, AD8512ARZ-REEL7, ADA4000-2ARZ, ADA4000-2ARZ-R7, and ADA4000-2ARZ-RL represent J-FET input topology alternatives. These devices feature significantly lower input bias current (5 pA to 25 pA compared to 700 nA) and are suitable for high-impedance signal sources. All maintain Active product status and RoHS3 compliance. The ADA4000 series operates from 8V to 36V, while the AD8512 series operates from 10V to 30V. These substitutes are applicable when input bias current reduction is a design requirement and supply voltage constraints permit operation within their specified ranges.

Temperature Range Consideration:

The LT1057IS8#PBF operates only to 85°C maximum, which does not meet the full -55°C to 125°C specification of the TLE2142MDR. This part is suitable only for applications with operating temperature requirements of -40°C to 85°C.

Supply Voltage Constraint Analysis:

Applications requiring operation below 8V supply voltage cannot use any listed substitute parts. The TLE2142MDR's 4V minimum supply specification is unique among the alternatives provided. Applications requiring operation above 36V supply voltage cannot use any listed substitute parts. The TLE2142MDR's 44V maximum supply specification exceeds all alternatives.

Frequently Asked Questions (FAQ)

Q: Can the ADA4075-2ARZ replace the TLE2142MDR in all applications?

A: The ADA4075-2ARZ is compatible only with applications where the supply voltage range is 9V to 36V and operating temperature is -40°C to 125°C. If your application requires operation below 9V supply voltage or below -40°C, the ADA4075-2ARZ is not suitable. Both devices use the 8-SOIC package and contain dual circuits, ensuring mechanical compatibility.

Q: What is the primary difference between the TLE2142MDR and the AD8512ARZ?

A: The TLE2142MDR is a general-purpose amplifier with rail-to-rail output, while the AD8512ARZ uses J-FET input technology. The AD8512ARZ has significantly lower input bias current (25 pA versus 700 nA), making it preferable for high-impedance applications. However, the AD8512ARZ operates from 10V to 30V, which is more restrictive than the TLE2142MDR's 4V to 44V range.

Q: Are all substitute parts available in multiple packaging options?

A: Yes. The ADA4075 and ADA4000 base part numbers are available in Tube, Cut Tape (CT) & Digi-Reel®, and Tape & Reel (TR) packaging variants. The AD8512 is available in Tube and Cut Tape & Digi-Reel® options. Packaging selection does not affect electrical performance; it addresses supply chain and assembly process requirements.

Q: Why does the LT1057IS8#PBF have a lower maximum operating temperature?

A: The LT1057IS8#PBF is specified for -40°C to 85°C operation. This device is not suitable for applications requiring the full -55°C to 125°C temperature range of the TLE2142MDR. Verify application temperature requirements before selecting this substitute.

Q: Can I use the ADA4000-2ARZ in a circuit designed for the TLE2142MDR if my supply voltage is 12V?

A: Yes, the ADA4000-2ARZ operates from 8V to 36V, which includes 12V operation. Both devices are housed in 8-SOIC packages with dual circuits. However, verify that the lower input bias current (5 pA versus 700 nA) and different slew rate (20 V/µs versus 45 V/µs) do not affect circuit performance in your specific application.

Q: What does "Rail-to-Rail" output mean for the TLE2142MDR?

A: Rail-to-rail output capability means the output voltage can swing to within a small margin of both the positive and negative supply rails. The TLE2142MDR achieves this; most substitute parts do not specify this characteristic. If your application requires output voltage to approach the supply rails, verify this specification in the substitute part datasheet.

Q: Are all listed parts RoHS3 compliant?

A: Yes. All parts listed—TLE2142MDR, AD8512ARZ variants, ADA4000-2ARZ variants, ADA4075-2ARZ variants, and LT1057IS8#PBF—are RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). All are suitable for applications with RoHS compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message