TLE2142MD Equivalent & Substitute Parts

Part Overview

The TLE2142MD is a general-purpose operational amplifier manufactured by Texas Instruments, featuring dual circuits in an 8-SOIC surface-mount package. This device is classified as Last Time Buy, indicating discontinued production with limited inventory availability. The TLE2142MD operates across a wide supply voltage range (4V to 44V) and temperature range (-55°C to 125°C), making it suitable for rail-to-rail applications requiring moderate slew rates and bandwidth performance.

Substitute parts are necessary due to the Last Time Buy status of the TLE2142MD. Identifying equivalent components ensures design continuity and long-term supply chain reliability for applications currently utilizing this device.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Output Type	Rail-to-Rail	—
Slew Rate	45	V/µs
Gain Bandwidth Product	5.9	MHz
Current - Input Bias	700	nA
Voltage - Input Offset	290	µV
Current - Supply (x2 Channels)	6.9	mA
Current - Output / Channel	50	mA
Voltage - Supply Span (Min)	4	V
Voltage - Supply Span (Max)	44	V
Operating Temperature	-55 to 125	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitute parts for the TLE2142MD are evaluated based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Number of Circuits: 2
Voltage - Supply Span: Minimum 4V to Maximum 44V (or compatible subset)
Operating Temperature: -55°C to 125°C (or compatible subset)
RoHS Status: ROHS3 Compliant

Secondary Performance Parameters:

Slew Rate: 45 V/µs (TLE2142MD baseline)
Gain Bandwidth Product: 5.9 MHz (TLE2142MD baseline)
Current - Output / Channel: 50 mA (TLE2142MD baseline)

Substitute parts are grouped into two categories:

Category 1: Direct Packaging Substitutes (Same Manufacturer) TLE2142MDR represents the active production equivalent of TLE2142MD, differing only in packaging format (Tape & Reel vs. Tube). All electrical specifications remain identical.

Category 2: Cross-Manufacturer Alternatives Parts from Analog Devices Inc. (AD8512ARZ series, ADA4000-2ARZ series, ADA4075-2ARZ series) provide functional alternatives with 8-SOIC packaging and dual-circuit configuration. These alternatives differ in amplifier type (J-FET vs. General Purpose), supply voltage ranges, and performance characteristics, requiring application-level verification.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	GBW (MHz)	Input Bias (nA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Output Type	Packaging	Product Status
TLE2142MD	Texas Instruments	General Purpose	45	5.9	700	4	44	-55 to 125	Rail-to-Rail	Tube	Last Time Buy
TLE2142MDR	Texas Instruments	General Purpose	45	5.9	700	4	44	-55 to 125	Rail-to-Rail	Tape & Reel	Active
AD8512ARZ	Analog Devices	J-FET	20	8	0.025	10	30	-40 to 125	—	Tube	Active
AD8512ARZ-REEL	Analog Devices	J-FET	20	8	0.025	10	30	-40 to 125	—	Cut Tape & Digi-Reel	Active
AD8512ARZ-REEL7	Analog Devices	J-FET	20	8	0.025	10	30	-40 to 125	—	Cut Tape & Digi-Reel	Active
ADA4000-2ARZ	Analog Devices	J-FET	20	5	0.005	8	36	-40 to 125	—	Tube	Active
ADA4000-2ARZ-R7	Analog Devices	J-FET	20	5	0.005	8	36	-40 to 125	—	Cut Tape & Digi-Reel	Active
ADA4000-2ARZ-RL	Analog Devices	J-FET	20	5	0.005	8	36	-40 to 125	—	—	Active
ADA4075-2ARZ	Analog Devices	General Purpose	12	6.5	30	9	36	-40 to 125	—	Tube	Active
ADA4075-2ARZ-R7	Analog Devices	General Purpose	12	6.5	30	9	36	-40 to 125	—	Cut Tape & Digi-Reel	Active
ADA4075-2ARZ-RL	Analog Devices	General Purpose	12	6.5	30	9	36	-40 to 125	—	Tape & Reel	Active

Engineering Selection Recommendations

Tier 1: Recommended Direct Substitute

TLE2142MDR is the primary recommended substitute. This part maintains identical electrical specifications to the TLE2142MD while offering Active product status and improved supply availability (5914 pcs in stock vs. 3555 pcs). The only difference is packaging format (Tape & Reel vs. Tube), which does not affect electrical performance. Both parts are ROHS3 Compliant and carry identical compliance certifications (REACH Unaffected, ECCN EAR99).

Tier 2: Cross-Manufacturer Alternatives

Cross-manufacturer alternatives from Analog Devices Inc. are suitable only for applications where the following conditions are met:

Supply voltage range compatibility: Applications requiring the full 4V to 44V range of the TLE2142MD cannot use AD8512ARZ series (10V to 30V maximum) or ADA4000-2ARZ series (8V to 36V maximum). ADA4075-2ARZ series (9V to 36V maximum) also does not support the 4V minimum specification.
Temperature range compatibility: Applications requiring the full -55°C to 125°C range of the TLE2142MD cannot use any Analog Devices alternatives, which operate only to -40°C minimum.
Performance trade-offs: ADA4075-2ARZ series offers comparable general-purpose amplifier functionality with ROHS3 compliance and Active status, but exhibits reduced slew rate (12 V/µs vs. 45 V/µs) and lower output current per channel (40 mA vs. 50 mA).

All substitute parts maintain 8-SOIC surface-mount packaging, dual-circuit configuration, and ROHS3 compliance. Selection of cross-manufacturer alternatives requires application-level circuit analysis to confirm compatibility with existing design parameters.

Frequently Asked Questions (FAQ)

Q1: Can TLE2142MDR be used as a direct replacement for TLE2142MD?

A: Yes. TLE2142MDR is the active production equivalent with identical electrical specifications. The difference is packaging format: TLE2142MD is supplied in Tube packaging, while TLE2142MDR is supplied in Tape & Reel format. Both are ROHS3 Compliant with equivalent compliance certifications. Substitution requires only verification that your assembly process accommodates the different packaging format.

Q2: What are the key limitations when considering Analog Devices alternatives?

A: Analog Devices alternatives have three primary limitations compared to TLE2142MD: (1) Reduced minimum supply voltage (8V to 10V vs. 4V), eliminating compatibility with low-voltage applications; (2) Reduced minimum operating temperature (-40°C vs. -55°C), eliminating compatibility with extended temperature-range applications; (3) Reduced slew rate performance (12V/µs to 20V/µs vs. 45V/µs), affecting high-frequency signal integrity. These limitations require circuit-level verification before substitution.

Q3: Are all substitute parts ROHS3 Compliant?

A: Yes. All substitute parts listed (TLE2142MDR, AD8512ARZ series, ADA4000-2ARZ series, ADA4075-2ARZ series) are ROHS3 Compliant. All carry REACH Unaffected status and ECCN EAR99 classification, matching the compliance profile of the original TLE2142MD.

Q4: Which substitute offers the best performance match for high-speed applications?

A: TLE2142MDR provides identical performance to TLE2142MD, including the 45 V/µs slew rate required for high-speed signal conditioning. Among Analog Devices alternatives, AD8512ARZ series offers the highest gain-bandwidth product (8 MHz vs. 5.9 MHz), but with reduced slew rate (20 V/µs). For applications requiring the original 45 V/µs slew rate, TLE2142MDR is the only suitable substitute.

Q5: Can I use ADA4075-2ARZ in a design originally specified for TLE2142MD?

A: ADA4075-2ARZ can be considered only if your application meets all of the following conditions: (1) Supply voltage range is 9V to 36V or narrower; (2) Operating temperature range is -40°C to 125°C or narrower; (3) Slew rate requirement is 12 V/µs or lower; (4) Output current requirement is 40 mA per channel or lower. If any of these conditions are not met, ADA4075-2ARZ is not compatible. Circuit-level analysis is required to confirm suitability.

Q6: What is the inventory status of substitute parts?

A: TLE2142MDR offers the highest inventory availability (5914 pcs) among direct substitutes. Analog Devices alternatives show strong availability: AD8512ARZ-REEL7 (30,300 pcs), ADA4075-2ARZ (19,461 pcs), and AD8512ARZ (12,423 pcs). Lowest availability is ADA4000-2ARZ-R7 (2,300 pcs). For long-term supply assurance, TLE2142MDR is the recommended choice.

Q7: Do all substitute parts use the same 8-SOIC package?

A: Yes. All substitute parts use the 8-SOIC package (0.154", 3.90mm Width) with surface-mount technology. Packaging format differs (Tube, Tape & Reel, or Cut Tape & Digi-Reel), but the physical component package remains identical, ensuring PCB footprint compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message