TLE2064CNG4 Equivalent & Substitute Parts

Part Overview

The TLE2064CNG4 is a J-FET input operational amplifier featuring four independent circuits in a 14-pin DIP package. This device is manufactured by Texas Instruments and is classified as a linear amplifier component. The TLE2064CNG4 is currently listed with obsolete product status, making identification of active equivalent parts essential for ongoing design support and procurement continuity.

Substiute Parts

TLE2064CNG4

Texas InstrumentsIn Stock: 819TLE2064CNG4 Datasheet

Current PartRFQ

TLE2064CN

Texas InstrumentsIn Stock: 2280TLE2064CN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2064CNG4 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Amplifier Type: J-FET input configuration
• Number of Circuits: 4 independent amplifier stages
• Slew Rate: 3.4 V/µs
• Gain Bandwidth Product: 2 MHz
• Input Bias Current: 4 pA
• Input Offset Voltage: 900 µV
• Supply Current: 1.25 mA per channel group
• Output Current per Channel: 80 mA
• Supply Voltage Range: 7 V to 36 V
• Operating Temperature Range: 0°C to 70°C

Mechanical Equivalence Criteria:

• Package Type: 14-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole
• Pin Configuration: Identical to base product number TLE2064

Compliance Equivalence Criteria:

• RoHS3 Compliance
• REACH Unaffected Status
• ECCN Classification: EAR99

The TLE2064CN meets all substitution criteria and is classified as a manufacturer-recommended equivalent part.

Parameter Comparison

Engineering Selection Recommendations

The TLE2064CN is the active equivalent for the obsolete TLE2064CNG4. Both parts share identical electrical specifications, mechanical packaging, and compliance certifications. The primary distinction is product status: TLE2064CNG4 is obsolete while TLE2064CN maintains active production status.

For new designs or ongoing procurement, TLE2064CN is the appropriate selection. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment. The through-hole 14-DIP package format is consistent between both parts, supporting direct board-level substitution without layout modification.

Frequently Asked Questions (FAQ)

Q: Can TLE2064CN directly replace TLE2064CNG4 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. Pin configuration, package dimensions, and electrical performance are equivalent. Direct substitution is supported without circuit modification.

Q: What is the difference between TLE2064CNG4 and TLE2064CN?

A: The primary difference is product status. TLE2064CNG4 is classified as obsolete, while TLE2064CN is active. All electrical parameters, package specifications, and compliance certifications are identical.

Q: Are there packaging differences between these parts?

A: Both parts use 14-DIP (0.300", 7.62mm) through-hole packages. The TLE2064CNG4 packaging specification is not detailed in available data, while TLE2064CN is supplied in tube packaging. The physical package and pin configuration remain identical.

Q: Do both parts meet current compliance requirements?

A: Yes. Both TLE2064CNG4 and TLE2064CN are ROHS3 compliant and REACH unaffected, meeting current regulatory standards.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by: J-FET amplifier type, 4-circuit configuration, 3.4 V/µs slew rate, 2 MHz gain bandwidth product, 4 pA input bias current, 900 µV input offset voltage, 1.25 mA supply current per channel group, 80 mA output current per channel, and 7 V to 36 V supply voltage range.

Q: Is the operating temperature range identical?

A: Yes. Both parts operate across 0°C to 70°C (TA), supporting equivalent thermal performance in specified applications.