TLE2062IPG4 Equivalent & Substitute Parts

Part Overview

The TLE2062IPG4 is a J-FET input operational amplifier featuring two independent circuits in an 8-pin DIP package. This device is designed for applications requiring low input bias current and high input impedance characteristics typical of J-FET amplifier topologies. The TLE2062IPG4 is discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing system support and new designs.

Substiute Parts

TLE2062IPG4

Texas InstrumentsIn Stock: 1083TLE2062IPG4 Datasheet

Current PartRFQ

TLE2062IP

Texas InstrumentsIn Stock: 1854TLE2062IP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2062IPG4 is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part must satisfy the following criteria:

Electrical Parameters (Must Match):

• Amplifier Type: J-FET
• Number of Circuits: 2
• Slew Rate: 3.4 V/µs
• Gain Bandwidth Product: 2 MHz
• Current - Input Bias: 4 pA
• Voltage - Input Offset: 900 µV
• Current - Supply: 625 µA (x2 Channels)
• Current - Output / Channel: 80 mA
• Voltage - Supply Span: 7 V (Min) to 36 V (Max)
• Operating Temperature Range: -40°C to 85°C

Mechanical Parameters (Must Match):

• Package / Case: 8-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The TLE2062IP qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

The TLE2062IP is a direct electrical and mechanical equivalent to the TLE2062IPG4. Both devices are manufactured by Texas Instruments and share identical specifications across all critical performance parameters, including slew rate, gain bandwidth product, input bias current, and supply voltage range.

Product Status Consideration: The TLE2062IPG4 is discontinued at DiGi Electronics, while the TLE2062IP maintains active product status. For applications requiring ongoing component availability and supply chain continuity, the TLE2062IP is the appropriate selection.

Compliance and Certification: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for industrial and commercial applications.

Packaging Distinction: The primary difference between these parts is packaging format. The TLE2062IPG4 is supplied in tape and reel format, while the TLE2062IP is supplied in tube packaging. This distinction affects procurement and handling procedures but does not impact electrical performance or pin compatibility.

Pin Compatibility: Both devices utilize the 8-DIP (0.300", 7.62mm) through-hole package with identical pinout, enabling direct substitution in existing PCB designs without layout modifications.

Frequently Asked Questions (FAQ)

Q: Can the TLE2062IP be used as a direct replacement for the TLE2062IPG4 in existing designs?

A: Yes. The TLE2062IP is electrically and mechanically equivalent to the TLE2062IPG4. Both devices feature identical J-FET amplifier specifications, pin configuration, and 8-DIP package dimensions. Direct substitution is supported without circuit modifications.

Q: What is the difference between TLE2062IPG4 and TLE2062IP?

A: The devices are electrically identical. The primary difference is packaging format: TLE2062IPG4 is supplied in tape and reel format, while TLE2062IP is supplied in tube packaging. This affects procurement and handling but not electrical performance.

Q: Are both parts RoHS compliant?

A: Yes. Both the TLE2062IPG4 and TLE2062IP are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory standards for industrial applications.

Q: What is the operating temperature range for these devices?

A: Both parts operate across the temperature range of -40°C to 85°C (TA), supporting applications in standard industrial and commercial environments.

Q: Can these devices be used in high-impedance input applications?

A: Yes. The J-FET input architecture provides an input bias current of 4 pA, enabling use in high-impedance sensing and measurement applications where low input current is required.

Q: What is the maximum supply voltage for these amplifiers?

A: Both devices support a maximum supply voltage span of 36 V, accommodating dual supply configurations up to ±18 V or single supply configurations up to 36 V.

Q: Are there any differences in moisture sensitivity between these parts?

A: The TLE2062IPG4 has a Moisture Sensitivity Level (MSL) of 1 (Unlimited). The TLE2062IP has MSL listed as Not Applicable due to its tube packaging format. Both are suitable for standard handling and storage conditions.