TLE2062IDR Equivalent & Substitute Parts

Part Overview

The TLE2062IDR is a J-FET input operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in an 8-SOIC surface mount package. This component is classified as a linear amplifier and maintains Active product status. The TLE2062IDR is utilized in applications requiring low input bias current and low input offset voltage characteristics inherent to J-FET input designs. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be achieved within the specified parameter ranges for this operational amplifier category.

Substiute Parts

TLE2062IDR

Texas InstrumentsIn Stock: 18831TLE2062IDR Datasheet

Current PartRFQ

LM833DT

STMicroelectronicsIn Stock: 166636LM833DT Datasheet

MFR RecommendedRFQ

NCS20072DR2G

onsemiIn Stock: 60363NCS20072DR2G Datasheet

MFR RecommendedRFQ

TL072CDT

STMicroelectronicsIn Stock: 203221TL072CDT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLE2062IDR are selected based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Mechanical Compatibility:

• Package type: 8-SOIC (0.154", 3.90mm Width)
• Mounting type: Surface Mount
• Number of circuits: 2

Electrical Compatibility Parameters:

• Voltage supply span overlap: Minimum 7V to maximum 36V operating range
• Current output per channel: Minimum 80 mA capability
• Input bias current: Low leakage characteristics (pA range)
• Slew rate and gain bandwidth product: Performance within application tolerance
• Operating temperature range: Minimum coverage of -40°C to 85°C

All substitute parts listed maintain the 8-SOIC package footprint and dual-channel configuration. Substitutes are grouped by amplifier type classification: J-FET input amplifiers maintain the lowest input bias current characteristics, while general-purpose and audio amplifiers offer alternative performance profiles within the mechanical and electrical constraints.

Parameter Comparison

Engineering Selection Recommendations

TL072CDT (STMicroelectronics)

The TL072CDT is a J-FET input operational amplifier with identical amplifier type classification to the TLE2062IDR. Both devices share J-FET input architecture, resulting in comparable input bias current performance (20 pA vs. 4 pA). The TL072CDT provides higher slew rate (16 V/µs) and gain bandwidth product (4 MHz) performance. The TL072CDT operates within the 6V to 36V supply range, overlapping the TLE2062IDR specification. The operating temperature range of the TL072CDT (0°C to 70°C) is narrower than the TLE2062IDR (-40°C to 85°C). The TL072CDT carries AEC-Q100 automotive qualification and is ROHS3 compliant. All devices share the 8-SOIC package footprint.

NCS20072DR2G (onsemi)

The NCS20072DR2G is a general-purpose operational amplifier with rail-to-rail output capability. Input bias current performance (5 pA) is comparable to the TLE2062IDR (4 pA). The NCS20072DR2G operates across a 2.7V to 36V supply range, providing extended low-voltage capability. Operating temperature range extends to 125°C, exceeding the TLE2062IDR specification. Current output per channel (65 mA) is lower than the TLE2062IDR (80 mA). The NCS20072DR2G is ROHS3 compliant and maintains the 8-SOIC package configuration.

LM833DT (STMicroelectronics)

The LM833DT is an audio amplifier classified as a dual-channel device in 8-SOIC packaging. Input bias current (300 nA) is significantly higher than the TLE2062IDR (4 pA), reflecting audio amplifier design characteristics. The LM833DT provides higher slew rate (7 V/µs) and gain bandwidth product (15 MHz). Supply voltage range (5V to 30V) overlaps the TLE2062IDR specification at the upper end. Operating temperature range extends to 105°C. Current output per channel (37 mA) is lower than the TLE2062IDR (80 mA). The LM833DT is ROHS3 compliant.

All substitute parts maintain Active product status, ROHS3 compliance, MSL Level 1 rating, and 8-SOIC surface mount packaging.

Frequently Asked Questions (FAQ)

Q: Can the TL072CDT directly replace the TLE2062IDR in all applications?

A: The TL072CDT shares J-FET input architecture and 8-SOIC packaging with the TLE2062IDR. Both devices operate within overlapping supply voltage ranges (6V to 36V). The TL072CDT provides higher slew rate and bandwidth performance. The operating temperature range of the TL072CDT (0°C to 70°C) does not extend to the full -40°C lower limit of the TLE2062IDR. Applications requiring operation below 0°C require the TLE2062IDR or alternative parts with extended low-temperature ratings.

Q: What is the primary difference between the NCS20072DR2G and the TLE2062IDR?

A: The NCS20072DR2G is classified as a general-purpose amplifier with rail-to-rail output, while the TLE2062IDR is a J-FET input amplifier. Input bias current performance is comparable (5 pA vs. 4 pA). The NCS20072DR2G provides extended operating temperature range (-40°C to 125°C) and lower minimum supply voltage (2.7V). Current output per channel is lower in the NCS20072DR2G (65 mA vs. 80 mA). Both devices share the 8-SOIC package footprint and ROHS3 compliance.

Q: Is the LM833DT suitable as a substitute for the TLE2062IDR?

A: The LM833DT is an audio amplifier with different input bias current characteristics (300 nA vs. 4 pA). The higher input bias current reflects audio amplifier design optimization. The LM833DT provides higher slew rate (7 V/µs) and gain bandwidth product (15 MHz). Current output per channel is lower (37 mA vs. 80 mA). The LM833DT is suitable for applications where audio amplifier performance characteristics and higher input bias current are acceptable within the circuit design.

Q: Are all substitute parts available in the same package?

A: All substitute parts listed (LM833DT, NCS20072DR2G, TL072CDT) are available in 8-SOIC (0.154", 3.90mm Width) surface mount packaging, identical to the TLE2062IDR. Pin-to-pin compatibility is maintained for all listed substitutes.

Q: What compliance certifications apply to all listed parts?

A: All parts (TLE2062IDR, LM833DT, NCS20072DR2G, TL072CDT) are ROHS3 compliant, carry Moisture Sensitivity Level 1 (Unlimited), and maintain Active product status. The TL072CDT additionally carries AEC-Q100 automotive qualification.

Q: Which substitute part has the lowest input bias current?

A: The TLE2062IDR maintains the lowest input bias current at 4 pA. Among substitutes, the NCS20072DR2G (5 pA) and TL072CDT (20 pA) provide comparable low-leakage performance. The LM833DT (300 nA) has significantly higher input bias current due to its audio amplifier classification.

Q: What is the maximum output current capability of each part?

A: TLE2062IDR: 80 mA per channel; TL072CDT: 40 mA per channel; NCS20072DR2G: 65 mA per channel; LM833DT: 37 mA per channel. Applications requiring output current exceeding 40 mA per channel should use the TLE2062IDR or NCS20072DR2G.