TLE2061AIPG4 Equivalent & Substitute Parts

Part Overview

The TLE2061AIPG4 is a J-FET input operational amplifier manufactured by Texas Instruments, part of the Excalibur™ series. This single-circuit, 8-DIP packaged device is designed for applications requiring low input bias current and low input offset voltage characteristics. The TLE2061AIPG4 is discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing design support and procurement continuity. Substitute parts must maintain identical electrical performance specifications and mechanical compatibility to ensure direct replacement capability.

Substiute Parts

TLE2061AIPG4

Texas InstrumentsIn Stock: 837TLE2061AIPG4 Datasheet

Current PartRFQ

TLE2061AIP

Texas InstrumentsIn Stock: 1479TLE2061AIP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2061AIPG4 is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute part, TLE2061AIP, shares identical specifications across all critical performance metrics: J-FET amplifier topology, single-circuit configuration, slew rate of 3.4 V/µs, gain bandwidth product of 2 MHz, input bias current of 4 pA, input offset voltage of 500 µV, supply current of 290 µA, output current of 80 mA per channel, supply voltage range of 7 V to 36 V, and operating temperature range of -40°C to 85°C. Both parts utilize the 8-DIP (0.300", 7.62mm) through-hole package with identical pinout and mechanical footprint. The key differentiator is packaging format: TLE2061AIPG4 is supplied in tape and reel format, while TLE2061AIP is supplied in tube packaging. Both maintain ROHS3 compliance and REACH unaffected status. Substitution is valid when packaging format change is acceptable for the application.

Parameter Comparison

Engineering Selection Recommendations

The TLE2061AIP is the direct substitute for the discontinued TLE2061AIPG4. Both parts are manufactured by Texas Instruments and maintain identical electrical specifications and mechanical compatibility. The TLE2061AIP is currently in active production status, ensuring long-term availability and supply chain continuity. Both parts comply with ROHS3 requirements and maintain REACH unaffected status, satisfying regulatory compliance requirements for industrial and commercial applications. The primary distinction between the two parts is packaging format: the original TLE2061AIPG4 uses tape and reel packaging (indicated by the "G4" suffix), while the substitute TLE2061AIP uses tube packaging. This packaging difference does not affect electrical performance or mechanical compatibility. Selection of TLE2061AIP is appropriate for applications where the original TLE2061AIPG4 was specified, provided that the change from tape and reel to tube packaging is acceptable for procurement and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can TLE2061AIP directly replace TLE2061AIPG4 in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The TLE2061AIP maintains all electrical specifications including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and supply voltage range. The 8-DIP through-hole package and pinout are identical, enabling direct PCB compatibility.

Q: What is the difference between TLE2061AIPG4 and TLE2061AIP?

A: The parts are electrically equivalent. The difference is packaging format: TLE2061AIPG4 is supplied in tape and reel format, while TLE2061AIP is supplied in tube packaging. The "G4" suffix in TLE2061AIPG4 indicates tape and reel packaging.

Q: Is TLE2061AIP currently available?

A: Yes. TLE2061AIP is in active production status with current inventory availability. TLE2061AIPG4 is discontinued at DiGi Electronics, making TLE2061AIP the recommended procurement option.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TLE2061AIPG4 and TLE2061AIP are ROHS3 compliant and REACH unaffected, meeting identical regulatory requirements.

Q: Are there any performance differences between the two parts?

A: No. All electrical parameters are identical: J-FET amplifier topology, 3.4 V/µs slew rate, 2 MHz gain bandwidth product, 4 pA input bias current, 500 µV input offset voltage, 290 µA supply current, 80 mA output current, -40°C to 85°C operating temperature, and 7 V to 36 V supply voltage range.

Q: Can I use TLE2061AIP in high-volume production?

A: Yes. TLE2061AIP is manufactured by Texas Instruments and is in active production, supporting high-volume procurement requirements. Tube packaging is standard for production quantities.