TLE2061ACPG4 Equivalent & Substitute Parts

Part Overview

The TLE2061ACPG4 is a J-FET input operational amplifier manufactured by Texas Instruments, part of the Excalibur™ series. This device integrates one amplifier circuit in an 8-DIP through-hole package and is designed for applications requiring low input bias current and low input offset voltage characteristics. The TLE2061ACPG4 is classified as an obsolete product. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

TLE2061ACPG4

Texas InstrumentsIn Stock: 986TLE2061ACPG4 Datasheet

Current PartRFQ

TLE2061ACP

Texas InstrumentsIn Stock: 2047TLE2061ACP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2061ACPG4 is determined by strict equivalence across the following critical parameters:

Electrical Characteristics:

• Amplifier topology (J-FET input architecture)
• Number of circuits (single amplifier per package)
• Slew rate (3.4 V/µs)
• Gain bandwidth product (2 MHz)
• Input bias current (4 pA)
• Input offset voltage (500 µV)
• Supply current (290 µA)
• Output current capability (80 mA per channel)
• Supply voltage range (7 V to 36 V)
• Operating temperature range (0°C to 70°C)

Physical & Compliance Characteristics:

• Package type (8-DIP through-hole)
• Physical dimensions (0.300", 7.62mm)
• RoHS3 compliance
• REACH unaffected status

The TLE2061ACP is identified as a direct substitute based on identical electrical specifications and package configuration. The primary distinction is product status and packaging format.

Parameter Comparison

Engineering Selection Recommendations

The TLE2061ACP is the direct substitute for the TLE2061ACPG4. Both parts share identical electrical and mechanical specifications, ensuring functional equivalence in circuit applications.

Selection Basis:

1. Product Status: The TLE2061ACPG4 is classified as obsolete, while the TLE2061ACP maintains active product status. Active status indicates ongoing manufacturer support, availability through distribution channels, and compliance with current regulatory requirements.

2. Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for new designs and production.

3. Electrical Equivalence: All electrical parameters—including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and supply voltage range—are identical between the two parts.

4. Physical Compatibility: Both parts utilize the 8-DIP through-hole package with identical physical dimensions (0.300", 7.62mm), enabling direct board-level substitution without layout modifications.

5. Supply Availability: The TLE2061ACP is available in higher inventory quantities (2000 Pcs) compared to the obsolete TLE2061ACPG4 (901 Pcs), supporting ongoing production requirements.

For new designs or production continuity, the TLE2061ACP is the appropriate selection. For legacy system maintenance where the original TLE2061ACPG4 is specified, the TLE2061ACP provides functional and physical equivalence.

Frequently Asked Questions (FAQ)

Q1: Can the TLE2061ACP be used as a direct replacement for the TLE2061ACPG4 in existing designs?

A: Yes. The TLE2061ACP is electrically and mechanically equivalent to the TLE2061ACPG4. All electrical parameters, package type, and mounting configuration are identical. Direct substitution is possible without circuit modifications or board redesign.

Q2: What is the primary difference between the TLE2061ACPG4 and TLE2061ACP?

A: The TLE2061ACPG4 is classified as an obsolete product, while the TLE2061ACP maintains active product status. The packaging format differs (TLE2061ACPG4 uses standard packaging; TLE2061ACP is supplied in tube packaging), but electrical and physical specifications remain identical.

Q3: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected. They satisfy identical environmental and regulatory requirements for manufacturing and deployment.

Q4: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by J-FET amplifier topology, single-circuit configuration, 3.4 V/µs slew rate, 2 MHz gain bandwidth product, 4 pA input bias current, 500 µV input offset voltage, 290 µA supply current, 80 mA output current, and 7 V to 36 V supply voltage range. All these parameters are identical between the TLE2061ACPG4 and TLE2061ACP.

Q5: Can the TLE2061ACP be used in applications requiring the 0°C to 70°C operating temperature range?

A: Yes. The TLE2061ACP operates across the 0°C to 70°C temperature range, matching the TLE2061ACPG4 specification.

Q6: Is the 8-DIP through-hole package identical between both parts?

A: Yes. Both parts use the 8-DIP through-hole package with physical dimensions of 0.300" (7.62mm). Board-level compatibility is maintained without layout modifications.

Q7: Why is the TLE2061ACP recommended over the obsolete TLE2061ACPG4?

A: The TLE2061ACP maintains active product status, ensuring ongoing manufacturer support, regulatory compliance, and availability through distribution channels. The obsolete TLE2061ACPG4 has limited supply and no ongoing manufacturer support. For new designs and production continuity, the TLE2061ACP is the appropriate selection.