TLE2024MDW Equivalent & Substitute Parts

Part Overview

The TLE2024MDW is a general-purpose operational amplifier integrated circuit containing four independent amplifier circuits in a 16-SOIC surface mount package. Manufactured by Texas Instruments under the Excalibur™ series, this device is classified as obsolete product status. Due to its obsolete designation, sourcing original TLE2024MDW units may present supply chain challenges. Identifying active equivalent parts ensures design continuity and long-term component availability for applications requiring general-purpose amplification with the specified electrical and mechanical characteristics.

Substiute Parts

TLE2024MDW

Texas InstrumentsIn Stock: 1000TLE2024MDW Datasheet

Current PartRFQ

TLE2024BMDWR

Texas InstrumentsIn Stock: 3906TLE2024BMDWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2024MDW is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility:

• Package type: 16-SOIC (0.295", 7.50mm Width)
• Mounting type: Surface Mount
• Pin count and footprint: Identical

Electrical Compatibility:

• Number of circuits: 4 independent amplifier channels
• Amplifier type: General Purpose
• Supply voltage range: 4 V to 40 V minimum and maximum
• Operating temperature range: -55°C to 125°C
• Output current per channel: 40 mA
• Gain bandwidth product: 2.8 MHz

Regulatory & Compliance:

• RoHS3 Compliance
• REACH Status: REACH Unaffected
• Moisture Sensitivity Level: 1 (Unlimited)

The TLE2024BMDWR qualifies as a direct substitute based on identical mechanical packaging, matching electrical specifications across all critical parameters, and equivalent regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

The TLE2024BMDWR is the manufacturer-recommended substitute for the obsolete TLE2024MDW. Both devices share identical mechanical packaging (16-SOIC surface mount), matching electrical specifications across all critical parameters including supply voltage range (4 V to 40 V), operating temperature range (-55°C to 125°C), and output current capability (40 mA per channel).

The TLE2024BMDWR maintains active product status with Texas Instruments, ensuring ongoing availability and supply chain stability. Both parts comply with ROHS3 requirements and carry REACH Unaffected status, meeting current regulatory standards for electronic component manufacturing and distribution.

The TLE2024BMDWR exhibits improved performance characteristics in slew rate (0.7 V/µs versus 0.5 V/µs), input bias current (35 nA versus 50 nA), and input offset voltage (0.5 mV versus 1 mV). These enhancements represent manufacturing improvements within the same product family and do not affect functional compatibility in applications designed for the TLE2024MDW.

Frequently Asked Questions (FAQ)

Q: Can the TLE2024BMDWR be used as a direct replacement for the TLE2024MDW in existing designs?

A: Yes. The TLE2024BMDWR is mechanically and electrically compatible with the TLE2024MDW. Both devices use identical 16-SOIC packaging, support the same supply voltage range (4 V to 40 V), operate across the same temperature range (-55°C to 125°C), and deliver equivalent output current (40 mA per channel). No circuit modifications are required.

Q: What are the differences between TLE2024MDW and TLE2024BMDWR?

A: The primary differences are product status and performance enhancements. The TLE2024MDW is obsolete, while the TLE2024BMDWR is active. The TLE2024BMDWR offers improved slew rate (0.7 V/µs), lower input bias current (35 nA), and reduced input offset voltage (0.5 mV). These represent manufacturing refinements within the same device family.

Q: Are there packaging differences between these parts?

A: No. Both the TLE2024MDW and TLE2024BMDWR use identical 16-SOIC (0.295", 7.50mm Width) surface mount packaging. PCB footprints and land patterns are identical.

Q: Does the TLE2024BMDWR meet the same compliance standards as the TLE2024MDW?

A: Yes. Both parts are ROHS3 compliant, carry REACH Unaffected status, and have Moisture Sensitivity Level 1 (Unlimited). Regulatory and environmental compliance requirements are equivalent.

Q: Why is the TLE2024MDW listed as obsolete?

A: The TLE2024MDW has reached end-of-life status with Texas Instruments. The TLE2024BMDWR represents the active continuation of this product line with equivalent functionality and improved performance characteristics.

Q: What is the difference between TLE2024MDW and TLE2024BMDWR packaging options?

A: The TLE2024MDW is supplied in standard packaging, while the TLE2024BMDWR is supplied in Tape & Reel (TR) format for automated assembly processes. The physical component and electrical specifications remain identical.