TLE2024CDWG4 Equivalent & Substitute Parts

Part Overview

The TLE2024CDWG4 is a general-purpose operational amplifier integrated circuit containing four independent amplifier circuits in a 16-SOIC surface mount package. Manufactured by Texas Instruments under the Excalibur™ series, this device is designed for linear amplification applications requiring moderate bandwidth and low input offset voltage.

The TLE2024CDWG4 is classified as obsolete product status. Locating equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications currently utilizing this component.

Substiute Parts

TLE2024CDWG4

Texas InstrumentsIn Stock: 974TLE2024CDWG4 Datasheet

Current PartRFQ

TLE2024CDWR

Texas InstrumentsIn Stock: 3076TLE2024CDWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2024CDWG4 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

• Number of circuits: 4 independent amplifier channels
• Package type: 16-SOIC surface mount configuration
• Electrical specifications: Slew rate 0.5 V/µs, gain bandwidth product 2.8 MHz, input bias current 45 nA, input offset voltage 1 mV
• Supply voltage range: 4 V to 40 V
• Output current per channel: 40 mA
• Operating temperature range: 0°C to 70°C
• Compliance: ROHS3 compliant, MSL Level 1

The TLE2024CDWR is identified as the manufacturer-recommended substitute. This part maintains identical electrical and mechanical specifications while differing only in packaging format (Cut Tape and Digi-Reel® versus the original packaging) and product status (Active versus Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The TLE2024CDWR is the direct substitute for the obsolete TLE2024CDWG4. Both parts are manufactured by Texas Instruments and maintain identical electrical performance specifications and mechanical package dimensions. The substitution is based on complete parameter equivalence across all critical operational characteristics.

The TLE2024CDWR carries Active product status, ensuring continued availability and manufacturer support. Both parts maintain ROHS3 compliance and MSL Level 1 moisture sensitivity rating, satisfying regulatory and environmental requirements.

The primary distinction between these parts is packaging format. The TLE2024CDWR is supplied in Cut Tape and Digi-Reel® formats, which may differ from the original TLE2024CDWG4 packaging. This difference does not affect electrical performance or mechanical compatibility in PCB assembly applications.

Frequently Asked Questions (FAQ)

Q: Can the TLE2024CDWR be used as a direct replacement for the TLE2024CDWG4?

A: Yes. The TLE2024CDWR is electrically and mechanically equivalent to the TLE2024CDWG4. All electrical parameters, package dimensions, and pin configurations are identical. The parts are interchangeable in circuit design and PCB layout.

Q: What is the difference between TLE2024CDWG4 and TLE2024CDWR?

A: The primary difference is product status and packaging format. The TLE2024CDWG4 is obsolete, while the TLE2024CDWR is active. The TLE2024CDWR is supplied in Cut Tape and Digi-Reel® packaging. All electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain ROHS3 compliance, MSL Level 1 rating, and identical REACH and ECCN classifications. Regulatory and environmental compliance is equivalent.

Q: Does the 16-SOIC package dimension remain the same?

A: Yes. Both parts use the 16-SOIC package with dimensions of 0.295" × 7.50mm width. PCB footprints and assembly processes are identical.

Q: What is the supply voltage operating range for these parts?

A: Both parts operate across a supply voltage span of 4 V minimum to 40 V maximum, supporting a wide range of power supply configurations.

Q: Are the slew rate and bandwidth specifications identical?

A: Yes. Both parts have a slew rate of 0.5 V/µs and gain bandwidth product of 2.8 MHz. Frequency response and signal handling characteristics are equivalent.